掺钼近化学计量比铌酸锂晶体的光折变性能研究

通过生长一系列掺钼近化学计量比铌酸锂晶体,研究了晶体的光折变性能,发现在488 nm和532 nm波长辐照下,当Mo的掺入量为0. 5mol%时,晶体的光折变灵敏度分别达到0. 25 cm/J和0. 21 cm/J。此外,极化条件的改变可以缩短晶体在488 nm波长辐照下的光折变响应时间。通过红外光谱、紫外可见吸收光谱和X射线光电子能谱的测试,对掺钼近化学计量比铌酸锂晶体的光折变性能变化的机制进行了研究。     

Structure and properties of rubber/organic montmorillonite nanocomposites prepared by in situ anionic intercalation polymerization

Polybutadiene (PB), polyisoprene (PI), and styrene–butadiene rubber/organic montmorillonite (OMMT) nanocomposites (NCs) were prepared by in situ anionic intercalation polymerization. The intercalation structure, chemical constitution, and morphology of the rubber/OMMT NCs were characterized with X‐ray diffraction, H NMR spectroscopy, and transmission electron microscopy; the thermal and dynamic mechanical properties of the rubber/OMMT NCs were characterized with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The mechanical properties of PB/OMMT NC were also tested. The results showed that a certain extent of exfoliated rubber/OMMT could be prepared by anionic in situ intercalation polymerization. The incorporation of OMMT obviously changed the microstructure content of PB and PI: the concentrations of the 1,2‐unit, 3,4‐unit, and trans‐1,4‐unit increased dramatically with an increasing concentration of OMMT, and the concentration of the cis‐1,4 structure decreased. The addition of OMMT‐DK1B and OMMT‐DK4 had little effect on the molecular weight and molecular weight distribution, but the addition of OMMT‐DK1 reduced the molecular weight of rubber, and the molecular weight distribution became broad. The glass‐transition temperature, weight‐loss temperature, storage modulus, and loss modulus of the NCs evidently increased, but tan δ decreased. OMMT apparently enhanced the rubber matrix; for example, the breaking strength and hardness of PB/OMMT NC crosslinked rubber increased greatly, but the tear strength and permanent deformation did not change much. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1344–1353, 2005     

The impact of in-line coagulant addition on fouling potential of secondary effluent at a pilot-scale immersed ultrafiltration plant

The impact of in-line coagulation pre-treatment of secondary effluent on the operation of an immersed hollow-fibre ultrafiltration membrane pilot was evaluated as part of a larger study on optimising phosphorus removal. The efficacy of alum and ferric chloride was investigated, with an emphasis on alum use. Both coagulants were found to shift the particle-size distribution of organic matter in the feed towards larger fractions, with a notable reduction in colloidal matter. This was reflected in a reduction of both average daily transmembrane pressure increases, as well as a reduction of transmembrane pressure increases within backpulse intervals. Fouling reduction was observed with both lower and higher membrane packing density modules (membrane surface areas of 55.7 and 62.7 m²/module). The results of one-way analysis of variance (ANOVA) testing indicate that for this pilot system, chemical pre-treatment and solids concentrations in the feed water played a statistically significant role in determining transmembrane pressure variations. Membrane packing density and membrane production method did not exhibit a statistically significant effect on transmembrane pressure under the conditions of this study.     

Self-assembling 1D core/shell microrods by the introduction of additives: a one-pot and shell-tunable method

Herein, we have developed a one-pot method for the fabrication of one-dimensional core/shell microrods with tunable shell compositions by the introduction of additives. Crystalline dimethyl melamine hydrochloride was utilized as the core, while melamine derivatives with different functional groups, such as pyrene, thiophene and naphthalene diimide, served as additives to regulate the core morphology and were adsorbed as the shell. The length and width of these one-dimensional structures can be tuned by varying the molar ratio of core and shell molecules as well as their total concentration. Through X-ray diffraction, the detailed molecular arrangements within the core of the microrods were revealed, and the selective effect of additives on specific crystal faces was evaluated. It is anticipated that this work may provide a facile approach for the fabrication of one-dimensional functional materials.     

铌酸锂晶体的光折变效应

铌酸锂(LiNbO₃, LN)是一种多功能多用途的人工晶体,被称为“光学硅”。近期以铌酸锂薄膜(LNOI)为平台的集成光子学发展迅速,有将“光学硅”变为现实的趋势。高集成意味着高局域高光强密度,使铌酸锂晶体的光折变效应变得不容忽视。光折变效应是光致折射率变化的简称,是非线性光学的重要组成部分。本文回顾了铌酸锂晶体光折变效应的发现和机理、不同掺杂及掺杂组合对光折变效应的调控,重点介绍了铋镁双掺铌酸锂晶体的光折变性能及相关理论和实验结果,概述了铌酸锂光折变波导和孤子,及基于LNOI的集成光子学器件中的光折变效应,并对未来的研究趋势进行了展望。期待我国发挥铌酸锂光折变研究及LNOI产业化的优势,在光子学芯片的竞争中占据主导地位。     

NH4X对LnBO3:Ce3+发光的增强作用

本文采用固相反应法合成了一系列LnBO₃:Ce³⁺磷光体。作者发现,在灼烧时添加NH₄X能使磷光体的发光相对亮度大幅度增加,而激发和发射峰的位置保持不变;与此同时,随着Ln³⁺离子半径的减小,LnBO₃:Ce³⁺的晶体结构从单斜晶系变为六方晶系,LnBO₃:Ce³⁺的激发和发射峰向长波方向移动。本文结果可为LnBO₃:Ce³⁺的应用提供依据。     

高压联合进汽阀门三维粘性流场数值分析

本文采用多分区 ＳＩＭＰＬＥＣ算法对 ６００ ＭＷ汽轮机高压联合进汽阀门内部复杂流动进行了三维粘性数值分析。流场计算结果表明总压损失主要集中在调节阀喉口附近。调节阀阀碟前后的两股高速气流在阀碟的正上方位置相碰引起较大的掺混损失;气流经过调节阀喉口后,附面层急剧增厚,形成一层较厚的沿管壁的低总压区。计算得到的流场特性为即将开展的阀门结构优化设计提供了重要依据。     

汽封结构内部流动现象的数值研究

本文采用作者发展的叶轮机械通用计算程序ＧＡＰ１０对带围带汽封和隔板汽封结构的动 叶片排流场进行了三维数值模拟,并着重对汽封结构内部流动结构进行了分析。     

A Thiophene Backbone Enables Two-Dimensional Poly(arylene vinylene)s with High Charge Carrier Mobility

Linear conjugated polymers have attracted significant attention in organic electronics in recent decades. However, despite intrachain π-delocalization, interchain hopping is their transport bottleneck. In contrast, two-dimensional (2D) conjugated polymers, as represented by 2D π-conjugated covalent organic frameworks (2D c-COFs), can provide multiple conjugated strands to enhance the delocalization of charge carriers in space. Herein, we demonstrate the first example of thiophene-based 2D poly(arylene vinylene)s (PAVs, 2DPAV-BDT-BT and 2DPAV-BDT-BP , BDT=benzodithiophene, BT=bithiophene, BP=biphenyl) via Knoevenagel polycondensation. Compared with 2DPAV-BDT-BP , the fully thiophene-based 2DPAV - BDT - BT exhibits enhanced planarity and π-delocalization with a small band gap (1.62 eV) and large electronic band dispersion, as revealed by the optical absorption and density functional calculations. Remarkably, temperature-dependent terahertz spectroscopy discloses a unique band-like transport and outstanding room-temperature charge mobility for 2DPAV-BDT-BT (65 cm² V⁻¹ s⁻¹), which far exceeds that of the linear PAVs, 2DPAV-BDT-BP , and the reported 2D c-COFs in the powder form. This work highlights the great potential of thiophene-based 2D PAVs as candidates for high-performance opto-electronics.     

轴流透平通用叶型设计模块开发

1前言在叶轮机械气动热力设计体系中，叶型设计是最基本而关键的一环，叶型的好坏及选用适当与否对机组性能有非常大的影响。本文的工作是我们研制的多级轴流透平通流部分气动热力设计体系中的重要组成部分，其目的是要在满足结构、工艺、强度等约束条件的同时，高效、准确地设计出具有良好气动性能的叶型。本模块采用高档微机网络和中文NT操作系统作为支撑环境，选用商业化的CAD／CAM软件作为主要开发工具，在其基础上进行二次开发[1]。2叶型设计的类型与方法根据不同的已知条件，轴流透平叶型设计工作可分为三种类型：2．1已知初始叶…