Cu（I）/Diamine-catalyzed Aryl-alkyne Coupling Reactions

Arylalkynes are important building blocks for the synthesis of natural products,pharmaceuticals,and artificial molecular devices1.They are often synthesized via the Pd-catalyzed Sonogashira coupling reactions between aryl halides and terminal alkynes2,3.Unfortunately,it remains difficult to apply the Sonogashira reaction to industrial scale and/or pharmaceutical synthesis,due to the high cost of Pd and the difficulty in removing the toxic Pd residues from the reaction products.Thus it is wor…     

Two salts of 5‐sulfosalicylic acid and 3‐aminopyridine

5‐Sulfosalicylic acid (5‐SSA) and 3‐aminopyridine (3‐APy) crystallize in the same solvent system, resulting in two kinds of 1:1 proton‐transfer organic adduct, namely 3‐aminopyridinium 3‐carboxy‐4‐hydroxybenzenesulfonate monohydrate, C₅H₇N₂⁺·C₇H₅O₆S⁻·H₂O or 3‐APy·5‐SSA·H₂O, (I), and the anhydrous adduct, C₅H₇N₂⁺·C₇H₅O₆S⁻ or 3‐APy·5‐SSA, (II). Both compounds have extensively hydrogen‐bonded three‐dimensional layered polymer structures, with interlayer homo‐ and heterogeneous π–π interactions in (I) and (II), respectively.     

Linear alkyl benzene sulphonate (LAS) degradation by immobilized Pseudomonas aeruginosa under low intensity ultrasound

We studied the LAS degradation of immobilized Pseudomonas aeruginosa with low-intensity ultrasonic and the influence of original LAS concentration, pH, rotary velocity and different conditions of low-intensity ultrasonic irradiation on the degradation of LAS. In our experiment, the degradation rate of LAS was the main index. We found that low-intensity ultrasonic irradiation could improve the metabolism of microorganism cells and promote the LAS biodegradation of immobilized cells. In the experiment, 50 mg/l LAS were used to simulate wastewater, and low-intensity ultrasonic was considered. We found the influence was obvious, and the optimal degradation rate was acquired when the conditions of ultrasonic were frequency 24 kHz, power 8 W, stimulation time 5 s, intermissive time 30 s, and total time 10 min. The LAS degradation rate of immobilized cells with ultrasonic were respectively 40% and 9.5% higher than that of the suspending cells and immobilized cells without irradiation.     

全硅MCM-41担载的加氢脱硫催化剂的TPR研究

用TRP技术研究了以全硅MCM-41(Si-MCM-41)和HNO3交换的全硅MCM-41(H-MCM-41)为载体制备的Ni-Mo、Co-Mo和Ni-W加氢脱硫(HDS)催化剂的还原性能，并以0．8(wt)％二苯并噻吩(DBT)的十氢萘溶液为模型化合物，在高压固定床反应器上考察了上述催化剂的加氢脱硫(HDS)反应性能。结果表明，Si-MCM-41经稀HNO3交换后，所担载的Ni-Mo和Ni-W催化剂还原性能、HDS活性和加氢活性有显著变化，但对Co-Mo催化剂影响不大。这说明在Ni-Mo／H-MCM-41和Ni-W／H-MCM-41中可能存在氢溢流现象，DBT的HDS活性与载体表面酸性和氢溢流有关。     

CuO-BaO/SiO2催化剂的结构表征

以XRD、XPS和EXAFS手段对CuO－BaO／Sic2催化剂及其还原态的结构进行了研究．结果表明，在CuO－BaO／SiO2体系中铜和钡都是以氧化态的形式存在，超细SiO2载体对所负载的CuO的结构有影响．随着样品负载量的逐渐降低，Cu－O和Cu－Cu睡的健长和配位数逐渐征小，而且低载量样品的健长和配位数减小的幅度最大．在总负载量＞13．39％的样品中，CuO以晶相的形式存在；总负载量＜13．39％的样品中，CUO呈现单层分布的高分出状态．还原态样品中钢以本价铜的形式存在，随负载量的降低，还原态Cu－Cu健的镇长和配位数也分别呈现出逐渐减小的趋势．还原态中心铜原子在催化剂表面的分布状态基本上保持了氧化态催化剂中CuO物相的分市状态．     

Preparation of [5,6]- and [6,6]-oxahomofullerene derivatives and their interconversion by Lewis acid assisted reactions of fullerene mixed peroxides

[60]Fullerene mixed peroxides C60(O)(OOtBu)4 exhibit chemo- and regioselective reactions under mild conditions. The epoxy moiety is opened by ferric chloride to form vicinal hydroxy chloride C60Cl(OH)(OOtBu)4. BF3 is also effective in opening the epoxy moiety. The O-O bond of the fullerene mixed peroxide is cleaved by aluminum chloride to form both [5,6]- and [6,6]-fullerene hemiketals (oxohomo[60]fullerenes). A Hock-type rearrangement is proposed for the formation of the hemiketals, in which a fullerene C-C bond is cleaved. Lewis acids and/or visible light can initiate isomerization of the hemiketal isomers. Single-crystal X-ray analysis and theoretical calculations confirmed the results.     

聚1-氨基蒽醌在二次锂电池正极材料中的应用

采用化学方法合成聚1-氨基蒽醌并用于二次锂电池正极材料,通过红外光谱、扫描电镜、粒度测试、循环伏安以及充放电测试等方法对材料的官能团结构、微观形貌、颗粒大小以及电化学性能等进行了研究与分析.实验表明,与金属锂组成二次锂电池后,聚1-氨基蒽醌达到了218.3 mAh•g－1的首次放电容量,经过25次循环后仍可保持较高的充放电效率.由于材料具有较高的能量密度且不含对环境有污染的元素S,因此是二次锂电池非常有希望的正极材料.     

Complexes formed between nitrilotris(methylenephosphonic acid) and M(2+) transition metals: isostructural organic-inorganic hybrids

Nitrilotris(methylenephosphonic acid) (NTP, [N(CH(2)PO(3)H(2))(3)]) recently has been found to form three-dimensional porous structures with encapsulation of templates as well as layered and linear structures with template intercalation. It was, therefore, of interest to examine the type of organic-inorganic hybrids that would form with metal cations. Mn(II) was found to replace two of the six acid protons, while a third proton bonds to the nitrilo nitrogen, forming a zwitter ion. Two types of compounds were obtained. When the ratio of acid to Mn(II) was less than 10, a trihydrate, Mn[HN(CH(2)PO(3)H)(3)(H(2)O)(3)] (2) formed. Compound 2 is monoclinic P2(1)/c, with a = 9.283(2) A, b = 16.027(3) A, c = 9.7742(2) A, beta = 115.209(3) degrees, V = 1315.0(5) A(3), and Z = 4. The Mn atoms form zigzag chains bridged by two of the three phosphonate groups. The third phosphonate group is only involved in hydrogen bonding. The metal atoms are octahedrally coordinated with three of the sites occupied by water molecules. Adjacent chains are hydrogen-bonded to each other through POH and HN donors, and the additional participation of all the water hydrogens in H-bonding results in a corrugated sheet-like structure. Use of excess NTP at a ratio to metal of 10 to 1 yields an anhydrous compound Mn[HN(CH(2)PO(3)H)(3)] (1), P2(1)/n, a = 9.129(1) A, b = 8.408(1) A, c = 13.453(1) A, beta = 97.830(2) degrees, V = 1023.0(2) A(3), and Z = 4. Manganese is five coordinate forming a distorted square pyramid with oxygens from five different phosphonate groups. The sixth oxygen is 2.85 A from an adjacent Mn, preventing octahedral coordination. All the protonated atoms, three phosphonate oxygens and N, form moderately strong hydrogen bonds in a compact three-dimensional structure. The open-structured trihydrate forms a series of isostructural compounds with other divalent transition metal ions as well as with mixed-metal compositions. This is indicative that the hydrogen bonding controls the type of structure formed irrespective of the cation.     

The Chemical Speciation and Behavior of Mercury and Selenium in the Insoluble Fraction of Striped Dolphin Liver

Most of the mercury and selenium exist in the insoluble fraction of dolphin liver. After the insoluble fraction was digested by alkaline protease in the presence of 1% SDS, approximately 50% of Hg and Se consisted in the supernatant and the others in the residue. Gel filtration chromatography of the hydrolysate showed that 96% of Hg and 87% of Se were combined with the high molecular weight proteins stably, which cannot be substituted by the complex reagents.Mercury and selenium in the residue were confirmed as HgSe crystal.     

Low-temperature growth and photoluminescence property of ZnS nanoribbons

At a low temperature of 450 degrees C, ZnS nanoribbons have been synthesized on Si and KCl substrates by a simple chemical vapor deposition (CVD) method with a two-temperature-zone furnace. Zinc and sulfur powders are used as sources in the different temperature zones. X-ray diffraction (XRD), selected area electron diffraction (SEAD), and transmission electron microscopy (TEM) analysis show that the ZnS nanoribbons are the wurtzite structure, and there are two types-single-crystal and bicrystal nanoribbons. Photoluminescence (PL) spectrum shows that the spectrum mainly includes two parts: a purple emission band centering at about 390 nm and a blue emission band centering at about 445 nm with a weak green shoulder around 510 nm.