Rheological Behavior for Mica-filled Polypropylene Composite Melts

The study on rheological properties of a series of mica-filled polypropylene (PP) composites was carried out. The influence of surface-treatment of mica particles on dynamic rheological behavior of the composites were dealt with. The viscosity (η) and dynamic modulus ( G‘ ) of the composite melts were higher than those of PP matrix, especially those for systems treated with silane, which was attributed to the interfacial adhesion enhancement. However, surface-treatment of mica by titanate resulted in lower η and G‘, as compared with the treatment by silane. The reason for this is believed to be the formation of the mono-molecular layer on the mica surface.     

气相生长氮化铝单晶的新方法

通过在钨坩埚盖开小孔的方法改变氮化铝结晶衬底上的温度场分布,在开孔处形成局部低温区;由于孔的几何尺寸的限制和氮化铝晶体生长的各向异性,开孔处的氮化铝晶体单晶化;随后,开孔处的单晶起籽晶的作用,逐渐长成较大尺寸、较高质量的氮化铝单晶.目前用该方法已经制备出直径大于2mm的氮化铝单晶体.     

退火温度对6H-SiC衬底上ZnO薄膜发光性质的影响

采用溶胶-凝胶方法,在6H-SiC衬底上制备ZnO薄膜.X射线衍射结果表明薄膜是c轴取向的,具有六方纤锌矿多晶结构.研究了退火温度对ZnO薄膜发光特性的影响.发现在650℃退火温度下,观察到近带边紫外发射和可见光发射并且紫外发光强度大于可见光发射.随着退火温度的提高,紫外峰强度减弱直至消失,而绿光发射强度先增加而后降低.对退火温度引起ZnO薄膜发光性质改变的机制进行了探讨.     

Cloning, Expression and Purification of Wheat Acetyl-CoA Carboxylases CT Domain in E.coil

The entire gene of carboxyltransferase(CT) domain of acetyl-CoA carboxylase(ACCase) from Chinese Spring wheat(CSW) plastid was cloned firstly,and the 2.3 kb gene was inserted into PET28a+ vector and expressed in E.coil in a soluble state.The (His)6 fusion protein was identified by SDS-PAGE and Western blot.The recombinant protein was purified by affinity chromatography,and the calculated molecular mass(Mr) was 88000.The results of the sequence analysis indicate that the cloned gene(GeneBank accession No.EU124675) was a supplement and revision of the reported ACCase CT partial cDNA from Chinese Spring wheat plastid.The recombinant protein will be significant for us to investigate the recognizing mechanism between ACCase and herbicides,and further to screen new herbicides.     

聚合物气体辅助注射成型制品的形态结构

作为一种由常规注射成型发展起来的聚合物加工技术,气体辅助注射成型具有节约原材料、缩短成型周期以及提高制品性能等优点,已得到广泛的应用.由于气辅成型过程是一个在刚、柔双重约束界面条件下进行的多相复杂体系的多次流动过程,因而其形态结构的形成、发展和演化要远比常规注塑成型复杂.然而在气辅成型的形态结构方面,国内外的研究一直以来开展得较少.近年来,作者在聚合物及其共混物、复合材料气辅成型制品的形态结构方面已开展了广泛的研究工作,本文对这些工作和一些重要结果作了总结,并简要分析了成型过程中剪切场对形态演化的影响,最后对该研究方向的发展趋势作了展望.     

“社会学本土化”的德国经验：“角色之争”及其去美国化效应

在西方先进国家中,德国社会学的发展相对晚进且历程坎坷。德国社会学在20世纪初萌芽之时,就因纳粹的“夺权”而停滞发展。第二次世界大战结束之后,在学科重建阶段又因美国的挟持而陷入了美国化危机。在此危难之时,达伦多夫1958年出版的著作《社会人》,意外引发德国社会学界关于“社会角色”概念的学术争辩,史称“角色之争”。这场大规模的学术论战,让德国社会学出现了“通过超美国化以去美国化”与“通过国际化以抵消美国化”的学科发展方向,对德国社会学发展历程中的去美国化与国际化产生了不小的推动效应。当今中国在建立具有国际影响力的中国特色社会学学术话语体系之时,德国社会学极富戏剧性的“复兴”之路,值得参考借鉴。     

创新导向减税与就业结构升级—基于研发费用加计扣除的检验

创新在中国经济社会发展中的作用愈发突出,如何促进高技能劳动力向创新主体部门集聚,值得深入探索。基于2018年企业所得税研发费用加计扣除比例提升冲击,利用A股上市公司2016−2019年数据,本文研究了创新导向减税对就业结构的影响。研究发现,加计扣除比例提升显著提高了企业雇佣劳动力中研究生所占比例,促进了企业创新人力资本积累。异质性分析显示,政策在非公有制企业、主板上市企业中效果更明显。对企业各层次雇佣规模的评估表明,雇佣总量及研究生、本科生雇佣数均有所提高,同时本科以下学历人员并未明显减少,这意味着政策未产生明显的挤出效应,高技能劳动力雇佣的增加并不以低技能劳动力的减少为代价。综合来看,政策不但能促进企业加大研发投入,还有助于提高全要素生产率和盈利水平。本文结论为通过实施结构性减税,推动创新驱动发展提供了经验支撑。     

新型聚苯胺共聚物季铵盐的合成与性能研究

以邻硝基苯甲酸和苯胺为原料,经6步反应合成了一种新型的聚[苯胺-N-(2-氯乙基)-2-氨基苯甲酰胺]共聚物季铵盐(6),其结构和性能经UV-Vis,IR,X-射线衍射和离子交换容量表征。结果表明,季铵化成盐后,6的IR和UV吸收带发生了明显蓝移;6具有较好的共轭性,可能呈导电性;6呈非晶态结构,能溶于甲醇和DMF等极性溶剂,具有一定的离子交换能力。     

Magnetic properties and magnetocaloric effects in amorphous and crystalline Gd55Co35Ni10 ribbons

The magnetic properties and magnetocaloric effects of amorphous and crystalline Gd55Co35Ni10 ribbons are investigated.A main phase with a Ho 12 Co 7-type monoclinic structure(space group P21/c) and a minor phase with a Ho4Co3-type hexagonal structure(space group P63/m) are obtained for crystalline ribbon after annealing.The amorphous ribbons order ferromagnetically and undergo a second-order transition at 192 K.For crystalline Gd55Co35Ni10 ribbons,two magnetic phase transitions occur at 158 and 214 K,respectively.The peak value of-△SM under a field change of 0-5 T is 6.5 J/kg K at 192 K for amorphous Gd55Co35Ni10 ribbons.A relatively large magnetic entropy change(～5.0 J/kg K) under a field change of 0-5 T for the crystalline Gd55Co35Ni10 ribbons is obtained in the temperature interval range of 154-214 K.The large platform of magnetic entropy change and the negligible thermal/magnetic hysteresis loss mean the crystalline Gd55Co35Ni10 compound can satisfy the requirement of the Ericsson-type refrigerator working in the temperature range from 154K to 214K.