中物院远红外自由电子激光实验研究

中国工程物理研究院基于射频直线加速器技术的远红外自由电子激光(FIR-FEL)实验取得阶段性进展,于2005年3月24晚8时30分首次出光, 并多次重复. 中心波长115μm, 谱宽1%.介绍了实验系统的主要组成部分和主要实验结果.     

介质的非均匀性对高次谐波影响的研究

讨论了气体介质的非均匀性对飞秒激光高次谐波产生过程的可能影响.计算结果表明,采用喷阀技术所提供的气体介质的密度梯度和气体原子运动速度的影响很小,不会产生实验上可观测的效果.这一结果支持了喷气靶在高次谐波产生中的广泛应用 关键词： 高次谐波 气体介质 各向异性 飞秒激光     

Study on the Baryon State X Produced in the Process J／ψ→p＋X,X→p＋P

The decay process J/ψ→p X X→p P，where p,p and P are the proton,antiproton and pseudoscalar states,respectively,has been studied in terms of the angular distribution and the generalized moment analysis methods.The result shows that we can identify the spin,but cannot determine the parity of the baryon resonance state X produced in the process J/ψ→p X X→p P.     

抽运激光在光靶中的局域及其对X射线激光特性的影响

新型X射线靶设计为:由SiO2和TiO2组成具有12个周期的一维光子晶体,在它的中间嵌入光靶材料层作为缺陷层,SiO2,TiO2和光靶层的光学厚度分别为λ4、λ4和λ2,λ为抽运激光波长.与普通平板光靶相比,当抽运光垂直照射到这种光靶时,靶层内部的光强将提高2个数量级,所以抽运激光的阈值强度将降低2个数量级,这有利于X射线激光的小型化.在同样的抽运激光照射下,X射线激光的强度将提高4个数量级,转换效率也将提高约4个数量级.由于平均电离度随抽运激光强度的提高而提高,所以采用这种光靶有利于使X射线激光向短波长推进. 关键词： X射线激光 光子晶体 光波局域     

液晶显示器用衬垫料的扫描电镜图像

论述了液晶显示器 (LCD)用衬垫料的作用和性能要求。给出了液晶显示器用衬垫料的扫描电镜图像。该图像对观测衬垫料的粒径分布和控制液晶显示器的盒厚均匀程度 ,消除液晶显示器的底色差异具有一定的意义。实验所得图像为从事液晶显示器的工程技术人员提供了清晰的衬垫料图像 ,为排除衬垫料的不均匀因素所造成的液晶屏的质量问题提供了依据。     

Cellulose dimethylphenylcarbamate-bonded carbon-clad zirconia for chiral separation in high performance liquid chromatography.

Porous zirconia particles are very robust material and have received considerable attention as a stationary phase support for HPLC. We prepared cellulose dimethylphenylcarbamate-bonded carbon-clad zirconia (CDMPCCZ) as a chiral stationary phase (CSP) for separation of enantiomers of a set of 14 racemic compounds in normal phase (NP) and reversed-phase (RP) liquid chromatography. Retention and enantioselectivity on CDMPCCZ were compared to those on CDMPC-coated zirconia (CDMPCZ) to see how the change in immobilization method of the chiral selector affects the retention and chiral selectivity. In NPLC, retention was longer and the number of resolved racemates was smaller on CDMPCCZ than on CDMPCZ. However, chiral selectivity factors for some resolved racemates were better on CDMPCCZ than on CDMPCZ. The longer retention on CDMPCCZ is likely due to strong, non-chiral discriminating interactions with the carbon layer on CDMPCZ. In RPLC only two racemates were resolved on CDMPCCZ, but retention times were shorter than, and resolutions were comparable to, those in NPLC, indicating a potential for improving chromatographic performance of the CDMPCCZ column in RPLC with optimized column preparation and separation conditions.     

ICP-AES测定饮用水源中的Cu、Mn、Pb、Cd、Zn

用ICP－AES法同时测定饮用水源中的Cu、Mn、Pb、Cd、Zn等重金属元素，具有基体效应小、测量范围宽等优点。检出限为0．2－4．0μg/L，回收率为91．5％－103．9％，相对标准偏差为0．29％－1．5％，测定密码样与实际样品，结果令人满意。     

Temperature effect on deposition rate of silicon nitride films

Temperature effects on deposition rate of silicon nitride films were characterized by building a neural network prediction model. The silicon nitride films were deposited by using a plasma enhanced chemical vapor deposition system and process parameter effects were systematically characterized by 2⁶⁻¹ fractional factorial experiment. The process parameters involved include a radio frequency power, pressure, temperature, SiH₄, N₂, and NH₃ flow rates. The prediction performance of generalized regression neural network was drastically improved by optimizing multi-valued training factors using a genetic algorithm. Several 3D plots were generated to investigate parameter effects at various temperatures. Predicted variations were experimentally validated. The temperature effect on the deposition rate was a complex function of parameters but N₂ flow rate. Larger decreases in the deposition rate with the temperature were only noticed at lower SiH₄ (or higher NH₃) flow rates. Typical effects of SiH₄ or NH₃ flow rate were only observed at higher or lower temperatures. A comparison with the refractive index model facilitated a selective choice of either SiH₄ or NH₃ for process optimization.     

Synchronization of Genesio chaotic system via backstepping approach

Backstepping design is proposed for synchronization of Genesio chaotic system. Firstly, the control problem for the chaos synchronization of nominal Genesio systems without unknown parameters is considered. Next, an adaptive backstepping control law is derived to make the error signals between drive Genesio system and response Genesio system with an uncertain parameter asymptotically synchronized. Finally, the approach is extended to the synchronization problem for the system with three unknown parameters. The stability analysis in this article is proved by using a well-known Lyapunov stability theorem. Note that the approach provided here needs only a single controller to realize the synchronization. Two numerical simulations are presented to show the effectiveness of the proposed chaos synchronization scheme.     

Synthesis of a Novel Aromatic Diamino-bridged Bis（β-cyclodextrin） and its Inclusion Complexation with Dyes Molecules

Bridged bis(β-cyclodextrin)s (CDs), as a very important family of CD derivatives, have been known that they can significantly alter the molecular binding ability and selectivity toward a variety of guests in comparison with parent cyclodextrin. Their two…