Spinful fermionic ladders at incommensurate filling: Phase diagram,local perturbations,and ionic potentials

We study the effect of external potential on transport properties of the fermionic two-leg ladder model. The response of the system to a local perturbation is strongly dependent on the ground state properties of the system and especially on the dominant correlations. We categorize all phases and transitions in the model (for incommensurate filling) and introduce “hopping-driven transitions” that the system undergoes as the inter-chain hopping is increased from zero. We also describe the response of the system to an ionic potential. The physics of this effect is similar to that of the single impurity, except that the ionic potential can affect the bulk properties of the system and in particular induce true long range order.     

High performance Zn–Sn–O thin film transistors with Cu source/drain electrode

Zn–Sn–O (ZTO) thin film transistors (TFTs) were fabricated with a Cu source/drain electrode. Although a reasonably high mobility (μ_FE) of 13.2 cm²/Vs was obtained for the ZTO TFTs, the subthreshold gate swing (SS) and threshold voltage (V_th) of 1.1 V/decade and 9.1 V, respectively, were inferior. However, ZTO TFTs with Ta film inserted as a diffusion barrier, exhibited improved SS and V_th values of 0.48 V/decade and 3.0 V, respectively as well as a high μ_FE value of 18.7 cm²/Vs. The improvement in the Ta‐inserted device was attributed to the suppression of Cu lateral diffusion into the ZTO channel region. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

含磁控和荷控两种忆阻器的混沌电路设计与仿真

利用惠普实验室荷控和磁控两种忆阻器模型设计了一个五阶混沌电路. 数值仿真结果表明该电路在参数变化情况下能产生Hopf分岔和反倍周期分岔两种分岔行为,并能产生双涡卷、单涡卷、周期态等不同相轨道. 为了验证电路的混沌行为,利用基本元器件设计了惠普实验室荷控和磁控忆阻器模拟器,并将其应用到对所设计电路中进行Pspice仿真,电路仿真结果验证了理论分析的正确性. 关键词： 混沌电路 HP忆阻器 模拟器 Pspice仿真     

Studies on the Nonisothermal Crystallization Behavior of Polypropylene/Multiwalled Carbon Nanotubes Nanocomposites

Polypropylene/multiwalled carbon nanotubes (PP/MWNTs) nanocomposites were prepared by a melt compounding process. The morphology and nonisothermal crystallization of these nanocomposites were investigated by means of optical microscopy, scanning electron microscopy, and differential scanning calorimetry. Scanning electron microscope micrographs of PP/MWNTs composite showed that the MWNTs were well dispersed in the PP matrix and displayed a clear nucleating effect on PP crystallization. Avrami theory, modified by Jeziorny and Mo's method, was used to analyze the kinetics of the nonisothermal crystallization process. It was found that the addition of MWNTs improved the crystallization rate and increased the peak crystallization temperature of the PP/MWNTs nanocomposites as compared with PP. The results show that the Jeziorny theory and Mo's method successfully describe the nonisothermal crystallization process of PP and PP/MWNTs nanocomposites.     

Dynamics of surface dipole and tripole solitons in nonlocal nonlinear media with optical lattice field

We find the existence conditions for stationary dipole and tripole surface solitons formed at the interface of a nonlocal nonlinear medium and a lattice with linearly modulated frequency. We investigate how the degree of nonlocality, the depth, and the modulation frequency of the optical lattice field affect on the existence of the surface solitons and their dynamics. The relationship between the power and the model parameters is identified. The stability of the surface dipole and tripole solitons is numerically investigated.     

On the rate constants of OH + HO2 and HO2 + HO2: A comprehensive study of H2O2 thermal decomposition using multi-species laser absorption

Hydrogen peroxide (H₂O₂) and hydroperoxy (HO₂) reactions present in the H₂O₂ thermal decomposition system are important in combustion kinetics. H₂O₂ thermal decomposition has been studied behind reflected shock waves using H₂O and OH diagnostics in previous studies (Hong et al. (2009) [9] and Hong et al. (2010) [6,8]) to determine the rate constants of two major reactions: H₂O₂ + M → 2OH + M (k₁) and OH + H₂O₂ → H₂O + HO₂ (k₂). With the addition of a third diagnostic for HO₂ at 227 nm, the H₂O₂ thermal decomposition system can be comprehensively characterized for the first time. Specifically, the rate constants of two remaining major reactions in the system, OH + HO₂ → H₂O + O₂ (k₃) and HO₂ + HO₂ → H₂O₂ + O₂ (k₄) can be determined with high-fidelity.No strong temperature dependency was found between 1072 and 1283 K for the rate constant of OH + HO₂ → H₂O + O₂, which can be expressed by the combination of two Arrhenius forms: k₃ = 7.0 × 10¹² exp(550/T) + 4.5 × 10¹⁴ exp(?5500/T) [cm³ mol^?1 s^?1]. The rate constants of reaction HO₂ + HO₂ → H₂O₂ + O₂ determined agree very well with those reported by Kappel et al. (2002) [5]; the recommendation therefore remains unchanged: k₄ = 1.0 × 10¹⁴ exp(?5556/T) + 1.9 × 10¹¹⁺exp(709/T) [cm³ mol^?1 s^?1]. All the tests were performed near 1.7 atm.     

PM10 formation during the combustion of N2-char and CO2-char of Chinese coals

The formation of PM₁₀ (particles less than or equal to 10 μm in aerodynamic diameter) during char combustion in both air-firing and oxy-firing was investigated. Three Chinese coals of different ranks (i.e., DT bituminous coal, CF lignite, and YQ anthracite) were devolatilized at 1300 °C in N₂ and CO₂ atmosphere, respectively, in a drop tube furnace (DTF). The resulting N₂-chars and CO₂-chars were burned at 1300 °C in both air-firing (O₂/N₂ = 21/79) and oxy-firing (O₂/CO₂ = 21/79). The effects of char properties and combustion conditions on PM₁₀ formation during char combustion were studied. It was found that the formation modes and particle size distribution of PM₁₀ from char combustion whether in air-firing or in oxy-firing were similar to those from pulverized coal combustion. The significant amounts of PM_0.5 (particles less than or equal to 0.5 μm in aerodynamic diameter) generated from combustion of various chars suggested that the mineral matter left in the chars after coal devolatilization still had great contributions to the formation of ultrafine particles even during the char combustion stage. The concentration of PM₁₀ from char combustion in oxy-firing was generally less than that in air-firing. The properties of the CO₂-chars were different from those of the N₂-chars, which was likely due to gasification reactions coal particles experienced during devolatilization in CO₂ atmosphere. Regardless of the combustion modes, PM₁₀ formation in combustion of N₂-char and CO₂-char from the same coal was found to be significantly dependent on char properties. The difference in the PM₁₀ formation behavior between the N₂-char and CO₂-char was coal-type dependent.     

Significant decrease in interfacial energy of grain boundary through serrated grain boundary transition

The mechanism of serrated grain boundary formation and its effect on liquation behaviour have been studied in a wrought nickel-based superalloy – Alloy 263. It was newly discovered that grain boundaries are considerably serrated in the absence of γ?′-phase or M₂₃C₆ at the grain boundaries. An electron energy-loss spectroscopy study suggests that serration is triggered by the discontinuous segregation of C and Cr atoms at grain boundaries for the purpose of relieving the excessive elastic strain energy. The grain boundaries serrate to have specific segments approaching one {111} low-index plane at a boundary so that the interfacial free energy of the grain boundary can be decreased, which may be responsible for the driving force of the serration. The serrated grain boundaries effectively suppress grain coarsening and are highly resistant to liquation due to their lower wettability resulting from a lower interfacial energy of the grain boundary.     

Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium

Previous studies have revealed that dislocation structures in metals with medium-to-high stacking fault energy, depend on the grain orientation and therefore on the slip systems. In the present work, the dislocations in eight slip-plane-aligned geometrically necessary boundaries (GNBs) in three grains of near 45° ND rotated cube orientation in lightly rolled pure aluminium are characterized in great detail using transmission electron microscopy. Dislocations with all six Burgers vectors of the ½?1?1?0? type expected for fcc crystals were observed but dislocations from the four slip systems expected active dominate. The dislocations predicted inactive are primarily attributed to dislocation reactions in the boundary. Two main types of dislocation networks in the boundaries were identified: (1) a hexagonal network of the three dislocations in the slip plane with which the boundary was aligned; two of these come from the active slip systems, the third is attributed to dislocation reactions (2) a network of three dislocations from both of the active slip planes; two of these react to form Lomer locks. The results indicate a systematic boundary formation process for the GNBs. Redundant dislocations are not observed in significant densities.     

An Overview of Infrared Spectroscopy Based on Continuous Wavelet Transform Combined with Machine Learning Algorithms: Application to Chinese Medicines,Plant Classification,and Cancer Diagnosis

Abstract

Infrared spectroscopy has been a workhorse technique for materials analysis and can result in positively identifying many different types of material. In recent years there have been reports using wavelet analysis and machine learning algorithms to extract features of Fourier transform infrared spectrometry (FTIR). The machine learning algorithms contain back-propagation neural network (BPNN), radial basis function neural network (RBFNN), and support vector machine (SVM). This article reviews the important advances in FTIR analysis employing a continuous wavelet transform (CWT) and machine learning algorithms, especially in the applications of the method for Chinese medicine identification, plant classification, and cancer diagnosis.