Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

Design and performance of the LLRF system for CSNS/RCS

The rapid cycling synchrotron(RCS) is part of the China Spallation Neutron Source(CSNS). The RCS provides 1.6 Ge V protons with a repetition rate of 25 Hz. The RF system in RCS is mainly composed of a ferrite loaded RF cavity, a high power tetrode amplifier, a bias supply of 3300 A and a digital low level RF(LLRF) system based on FPGA. The major challenge of the LLRF system is to solve problems caused by rapid frequency sweeping and the heavy beam loading effect. A total of eight control loops are applied to ensure the normal operation. An effective feedforward scheme is widely used to improve the dynamic performance of the system. The design of the LLRF system and high power integration test results with the prototype RF system are presented.     

太阳运动模拟平台的单片机控制

针对用太阳运动模拟平台实现太阳运行位置的全面预测和重现这一问题,提出了采用单片机对该平台进行控制,电机通过变频实现不同时间段不同速率运动模拟太阳运行轨迹的方法。根据输入日期计算出太阳的高度角和方位角,并转换为驱动电机的脉冲数和频率,电机带动执行机构运动使模拟光源到达预定位置。用编码器测量电机实际脉冲,定期进行误差校正来提高系统的稳定性和精度,减少误差。经过实验验证,该平台能够使模拟光源按照预计的轨迹运动,得出该方法是可行的,所设计的程序具有可靠性的结论。     

椭圆纳米盘中磁涡旋结构的方位角自旋波模式

本文针对坡莫合金椭圆形盘中的磁涡旋结构, 采用微磁学模拟与傅里叶分析相结合的技术研究了磁涡旋自旋波的本征激发模式. 通过沿样品短轴方向施加一面内方向的脉冲磁场, 观察到一系列方位角自旋波模式. 观察到的自旋波模式具有两重对称性, 可以通过C₂群理论来进行类型的划分. 此外, 自旋波模式的频率随着方位角指标的变化而线性增加. 模拟结果显示样品的平均交换能量密度明显的高于平均静磁能量密度; 局域交换能量密度主要集中在涡核初始位置, 而局域静磁能量密度主要分布在长轴附近. 交换作用对受限于铁磁薄膜椭圆盘中的单个涡旋态的能量要起主导作用, 从而导致方位角自旋波模式频率随着方位角指标的增加而增加.     

确定性矩阵可分离压缩成像

针对可分离压缩传感使用的可分离随机正交矩阵在处理大尺度图像等高维信号感知时难度太大或成本过高的问题,引入确定性测量矩阵,提出确定性矩阵可分离压缩传感,可将如托普利兹矩阵及循环矩阵等具有确定性结构的矩阵作为可分离压缩传感的左、右可分离矩阵.该方案可以降低独立元素的数目,从而显著降低前端物理实现的难度与成本.数值模拟实验分别评估了该方法在不同采样率及不同图像尺寸下的压缩重建性能,结果表明该方法在独立元素非常少的情形下得到与原随机正交矩阵相近的重建质量,证明了其可行性.     

分布视角下的异质性群体收入分配格局研究

本文运用反映不同收入群体异质性的混合分布测度方法估计收入分布,对收入分布拟合效果的评判方法进行了探讨,在利用假设检验思想从收入变动角度给出一种收入群体界定标准的基础上,从规模上刻画我国收入分配格局,并运用夏普里分解规则对影响格局形成的宏观因素进行了解构。对CHNS(1989-2011)住户调查数据实证分析的结果表明,近年来城乡居民收入分布逐渐呈多峰特征且城镇更为明显;城镇和农村居民不同收入群体间的相互作用相当,低收入群体内部收入的增长可有效促进自身规模的缩小,中收入群体内部收入的增长虽同样有助于低收入群体规模的缩小但对自身群体规模变动影响不大,高收入群体内部收入的增长则将有助于自身规模的增大,而各群体内收入分配差距的扩大多会阻碍"橄榄型"格局的形成。     

Improvement of resistive switching fluctuations by using one step lift‐off process

Bipolar resistive switching characteristics are investigated in ZrO₂ containing Cu thin layer devices, particularly for the self‐isolated‐structure device fabricated by one step lift‐off process. Compared with the traditional‐structure device, the self‐isolated‐structure device shows more uniform resistive switching characteristics. This is because the isolation of each device cell has negligible influence on each other and thus mitigates possible crosstalk between each cell. These results suggest that the feasibility of good stabilization of the resistive switching parameters can be obtained through one step lift‐off process. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Low-Energy Dislocation Structure (LEDS) character of dislocation boundaries aligned with slip planes in rolled aluminium

For the specific slip geometry of two sets of coplanar systems (a total of four systems) in fcc metals, the range of dislocation networks in boundaries aligned with one of the two active slip planes is predicted from the Frank equation for boundaries free of long-range elastic stresses. Detailed comparison with experimental data for eight dislocation boundaries in cold-rolled aluminium grains of the 45° ND rotated Cube orientation is conducted. It is concluded that the boundaries are Low-Energy Dislocation Structures, which are in good agreement with the Frank equation while also lowering the energy by dislocation reactions. Cross slip plays a role in the boundary formation process.