Two-worker blocking congestion model with walk speed m in a no-passing circular passage system

This paper introduces a blocking model and closed-form expression of two workers traveling with walk speed m (m = integer) in a no-passing circular-passage system of n stations and assuming n = m + 2, 2m + 2, …. We develop a Discrete-Timed Markov Chain (DTMC) model to capture the workers’ changes of walk, pick, and blocked states, and quantify the throughput loss from blocking congestion by deriving a steady state probability in a closed-form expression. We validate the model with a simulation study. Additional simulation comparisons show that the proposed throughput model gives a good approximation of a general-sized system of n stations (i.e., n > 2), a practical walk speed system of real number m (i.e., m ? 1), and a bucket brigade order picking application.     

Solution‐processable and thermally cross‐linkable fluorene‐cored triple‐triphenylamines with terminal vinyl groups to enhance electroluminescence of MEH‐PPV: Synthesis,curing, and optoelectronic properties

This study reports the synthesis, curing, and optoelectronic properties of a solution‐processable, thermally cross‐linkable electron‐ and hole‐blocking material containing fluorene‐core and three periphery N‐phenyl‐N‐(4‐vinylphenyl)benzeneamine ( FTV ). The FTV exhibited good thermal stability with T_d above 478 °C in nitrogen atmosphere. The FTV is readily cross‐linked via terminal vinyl groups by heating at 160 °C for 30 min to obtain homogeneous film with excellent solvent resistance. Multilayer PLED device [ITO/PEDOT:PSS/cured‐ FTV /MEH‐PPV/Ca (50 nm)/Al (100 nm)] was successfully fabricated using solution processed. Inserting cured‐ FTV is between PEDOT:PSS and MEH‐PPV results in simultaneous reduction in hole injection from PEDOT:PSS to MEH‐PPV and blocking in electron transport from MEH‐PPV to anode. The maximum luminance and maximum current efficiency were enhanced from 1810 and 0.27 to 4640 cd/m² and 1.08 cd/A, respectively, after inserting cured‐ FTV layer. Current results demonstrate that the thermally cross‐linkable FTV enhances not only device efficiency but also film homogeneity after thermal curing. FTV is a promising electron‐ and hole‐blocking material applicable for the fabrication of multilayer PLEDs based on PPV derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

Synthesis and applications of a novel supramolecular polymer network with multiple H‐bonded melamine pendants and uracil crosslinkers

A conjugated main‐chain copolymer ( PBT ) consisting of bithiazole, dithieno[3,2‐b:2′,3′‐d]pyrroles (DTP), and pendent melamine units was synthesized by Stille polymerization, which can be hydrogen‐bonded (H‐bonded) with proper molar amounts of bi‐functional π‐conjugated crosslinker F (i.e., two uracil motifs covalently attached to a fluorene core through triple bonds symmetrically) to develop a novel supramolecular polymer network ( PBT/F ). The effects of multiple H‐bonds on light harvesting capabilities, HOMO levels, and photovoltaic properties of polymer PBT and H‐bonded polymer network PBT/F are investigated. The formation of supramolecular polymer network ( PBT/F ) between PBT and F was confirmed by FTIR and XRD measurements. Because of the stronger light absorption, lower HOMO level, and higher crystallinity of H‐bonded polymer network PBT/F , the solar cell device containing PBT/F showed better photovoltaic properties than that containing polymer PBT . The preliminary results show that the solar cell device containing 1:1 weight ratio of PBT/F and [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) offers the best power conversion efficiency (PCE) value of 0.86% with a short‐circuit current density (J_sc) of 4.97 mA/cm², an open circuit voltage (V_oc) of 0.55 V, and a fill factor (FF) of 31.5%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tupisteroide A–C,three new polyhydroxylated steroidal constituents from the roots of Tupistra chinensis

Three new steroidal compounds with polyhydroxy groups, tupisteroide A–C (1–3), were obtained from the roots of Tupistra chinensis, together with one known compound (4) that was isolated from this plant for the first time. The structures of tupisteroide A–C were determined on the basis of one‐ and two‐dimensional NMR spectroscopy, including ¹H–¹H Correlation Spectroscopy, Heteronuclear Multiple Bond Correlation, and Heteronuclear Single Quantum Coherence experiments. The isolated compounds were evaluated for their cytotoxic activities against A549, HepG2, and CaSki cancer cell lines in vitro. Among them, compounds 1, 2, and 4 did not show significant inhibitory activity, but compound 3 showed cytotoxicity against A549 cancer cell lines with IC₅₀ values of 25.0 μM. Copyright © 2012 John Wiley & Sons, Ltd.     

Fabrication of a sol–gel derived microporous zirconia membrane for nanofiltration

This paper reports the fabrication and nanofiltration properties of a sol–gel derived microporous zirconia membrane. Effects of synthesis parameters, including hydrolysis time, hydrolysis temperature, hydrolysis ratio and chelating agent dopant, on the state and size of polymeric zirconia sol, were investigated. Highly reproducible and stable zirconia sol after refluxing at 40 °C for 180 min, with an average particle size of approximately 8.6 nm, was synthesized with a recipe of [Zirconium n-propoxide]: [Diethanolamine]: [1-propanol]: [H₂O] being 1: 2.2: 28.7: 9.4 (in molar ratio). The sol was subsequently used for the fabrication of microporous ZrO₂ membranes onto alumina supported mesoporous γ-Al₂O₃ layers. ZrO₂ membranes with molecular weight cut-off (MWCO) of 354, 1,195, corresponding to the pore size of 0.94 and 1.75 nm, were successfully fabricated. Ionic retention properties of such ZrO₂ membranes with respect to electrolyte solutions, like MgCl₂, CaCl₂, NaCl and Na₂SO₄, were also determined. Effects of parameters such as concentration of salt solutions and trans-membrane pressure on retention rates of microporous ZrO₂ membranes were studied in detail. Results showed that zirconium n-propoxide derived microporous ZrO₂ membranes exhibited comparatively high retention rates towards divalent ions like Mg²⁺ and Ca²⁺, while much lower retention rates were observed for mono-valent ion (Na⁺) in the present study, which are the characteristics of nanofiltration membranes.     

Viscosity dependence of electrochemical etching for gold tip fabrication

We suggest an electrochemical etching method with viscous etchant to enhance the sharpness of tip of scanning probe microscope. The viscosity of the etchant mixed with HCl solution and glycerol was used as a control parameter in addition to the voltage applied to the tip. In order to improve the sharpness of the tip, a nano-scale meniscus formed between the end of the tip and the liquid level was used. The shapes, aspect ratios, and radii of tips were measured depending on the concentration of the etchant. It was found that the tip etched with the mixed liquid with glycerol was sharper than the tip with the pure HCl solution. This can be explained by the fact that the meniscus formed by viscous liquid is maintained with a thinner diameter and causes final etching until the meniscus bridge is ruptured.