光敏电阻基本特性测量实验的设计

介绍了测量CdS光敏电阻的伏安特性和光照特性的实验方法，并给出了相应的实验结果。     

Envelop solitons in dusty plasmas for warm dust

A nonlinear Schrödinger equation is obtained for the warm dusty plasmas. The modulational instability of envelop soliton is investigated in this paper. Both the temperature of the dust grains and the charge variations of dust grains affect the instability regions of the dusty plasmas. It also affect the amplitude and the width of the envelop soliton.     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

CRYSTAL AND MOLECULAR STRUCTURE OF A NOVEL Au Ag SUPRACLUSTER COMPOUND [Au_13Ag_12(μ-Br)_4(μ_3-Br)_2(Ph_3P)_10-

<正> [Au13Ag12(μ-Br)1(μ3-Br)2 (Ph3P)10Br2] Br, monoclinic. space group C2/m, a = 36. 496(17). b=16. 878(7), c-=19. 772(9) A , β=99. 87(5)°, V=11998. 9 A3.Z=2. The final R(Rw) is 0. 097(0. 109) for 3779 reflections with I>3σ(I). The structure can he considered as two icosahedral cluster units (AurAg6) sharing one vertex and linked hy six bromine atoms. The Au - Au, Au - Ag. and Ag-Ag distances fall in the ranges of 2. 69-2. 96. 2. 84-3. 02. and 2. 92-3. 26 A, respectively.     

PECVDSiON薄膜的工艺控制,性质及其潜在应用

研究了等离子增强化学气相淀积氮氧化硅薄膜的工艺控制、性质以及薄膜波导在超大规模集成电路光互连中的潜在应用。     

注入控制铜蒸气激光方向性时间过程测量

实验研究了注入控制对铜蒸气激光非稳腔输出光束质量的影响，从输出光发散角时间分辨过程的测量结果说明注入加速被注入腔内激光发散角的减小过程。由于被注入腔内放大自发辐射的存在，为得到较好的注入控制效果，注入光的脉宽和进入被注入腔的延时必须恰当。     

CexGdyTb1-x-yP5O14晶体生长及其光谱

采用蒸发溶液法从磷酸溶液中生长出一系列CexGdyTb1-x-yP5O14晶体.测定了它们的结构.它们属于单斜晶系,空间群P21/c.测定了Ce0.9Gd0.1P5O14、Ce0.9Tb0.1P5O14和La0.8Gd0.1Tb0.1P5O14等晶体的光谱.首次观察到,将Gd加入CexTb1-xP5O14晶体中形成.CexGdyTb1-x-yP5O14时阻碍了Ce3+→Tb3+的能量传递,导致Ce3+的发射峰增强,Tb3+的5D4-FJ发射峰减弱、而5D3-7FJ发射峰增强.     

Stable atomic structure and magnetism of Pt–Cr binary surface alloys on Pt(0 0 1): First-principle calculations

The possibility of Pt–Cr surface alloys formation on Pt(0 0 1) was investigated and their magnetism was calculated by the full-potential linearized augmented plane wave (FLAPW) method with eight different atomic configurations. The most stable structure was calculated to be the Pt-segregated L1₂ ferromagnetic surface alloy. A₃B types (L1₂ or D0₂₂) were more stable compared to AB types (L1₀). It implies that the A₃B type surface alloys may be formed when depositing a monolayer of Cr on Pt(0 0 1). It was found from the total energy calculations that there exists a strong tendency of the Pt segregation. The segregation further stabilizes the surface alloy significantly. The work function of the most stable surface alloy was calculated to be 6.02 eV and the magnetic moment of the surface Cr was much enhanced to 3.3 μ_B. It is a quite interesting finding that the coupling between Cr and Pt atoms on the surface plane is ferromagnetic in the Pt-segregated L1₂ ferromagnetic surface alloy, while the coupling is antiferromagnetic in the bulk.     

Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

包膜超声造影微泡次谐波特性的优化设计与实验研究

基于包膜超声造影微泡在超声场中的理论振动模型,对其次谐波特性进行优化设计,从理论上计算和分析了微泡粒径、膜弹性及声压等对微泡次谐波响应的影响,以期获得其用于非破坏性次谐波成像的最佳条件。另外通过改变膜材料的配比, 制备了具有不同膜弹性的超声造影微泡,对其声学特性进行了体外声学实验测定。仿真计算和实验结果表明,在合适的膜材料配比条件下,制得的平均粒径为3μm左右的包膜微泡,可获得满意的次谐波响应,并且其用于非破坏性次谐波成像时的最佳工作声压约200-400 kPa。