Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Nanocrystalline cellulose/fluorinated polyacrylate latex via RAFT‐mediated surfactant‐free emulsion polymerization and its application as waterborne textile finishing agent

A simple method for nanocrystalline cellulose (NCC)/fluorinated polyacrylate was developed by RAFT‐mediated surfactant‐free emulsion polymerization, in which the nanocomposites formed a core‐shell spherical morphology. The influence of the content of NCC‐g‐(PAA‐b‐PHFBA) (AA was acrylic acid, HFBA was hexafluorobutyl acrylate) on the properties of latex and film were systematically studied. The monomer conversion, the tensile strength, and water–oil repellency of film increased first and then decreased, the latex particle size decreased first and then decreased, when the content of NCC‐g‐(PAA‐b‐PHFBA) increased from 1 to 6 wt %. Elongation at break and thermal stability distinctly decreased when the content of NCC‐g‐(PAA‐b‐PHFBA) gradually increased. XPS showed that the fluorine‐containing groups well concentrated at the film–air interfaces during the annealing process. SEM analysis revealed that the treated fiber had a rugged surface, and the treated fabric had an excellent water repellency. In addition, this green grafting method in water offered a new perspective for the fabrication of exceptional NCC‐based nanocomposites with NCC as the core and also helped to promote the potential applicability of NCC in a range of multipurpose applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1305–1314     

Hexanuclear 3d − 4f metal–organic cages assembled from a carboxylic acid‐functionalized tris‐triazamacrocycle for highly selective fluorescent sensing of picric acid

Two Ln^III ions are sandwiched by dinuclear Co^II building blocks derived from a tris‐triazamacrocyclic ligand bearing pendant carboxylic acid functionality, 1,3,5‐tris((4,7‐bis(2‐carboxyethyl)‐1,4,7‐triazacyclonon‐1‐yl)methyl)‐benzene (H₆L), giving rising to two nanoscale heterometallic metal–organic cages formulated as [Co₄Ln₂(LH_2.5)₂(H₂O)₄]·(ClO₄)₆·NO₃·nH₂O [Ln = Dy, n = 12 ( 1 ); Ln = Yb, n = 9 ( 2 )], whose internal cavity accommodates a guest NO₃^? anion. Their hexanuclear cage‐like architectures are maintained both in solution and solid states as confirmed by mass spectrum as well as X‐ray diffraction experiments. These two cages display ligand‐based fluorescence emissions and therefore both were chosen to be operated as fluorescent chemosensors for the detection of nitroaromatic compounds. Attractively, these metal–organic cages allow highly selective and sensitive detection of picric acid (PA) over other nitroaromatics in solution and suspension, and the fluorescence resonance energy transfer (FRET) between the cage probes and PA is mainly responsible for the remarkable detection efficiency.     

Liquid-Repellent Metal Oxide Photocatalysts

Metal oxide photocatalysts (MOPCs) decompose organic molecules under illumination. However, the application of MOPCs in industry and research is currently limited by their intrinsic hydrophilicity because MOPCs can be wetted by most liquids. To achieve liquid repellency, the surface needs to possess a low surface energy, but most organic molecules with low surface energy are degraded by photocatalytic activity. Herein, current methods to achieve liquid repellency on MOPCs, while preventing degradation of hydrophobic coatings, are reviewed. Classically, composite materials containing MOPCs and hydrophobic organic compounds possess good liquid repellency. However, composites normally form irregular coatings and are hard to prepare on surfaces such as those that are mesoporous or nanostructured. In addition, the adhesion of composites to substrates is often weak, resulting in delamination. Recent studies have shown that the direct grafting reaction of polydimethylsiloxane (PDMS) from silicone oil (methyl-terminated PDMS) under illumination results in a stable polymer brush. This easy and simple grafting method allows us to create stable liquid-repellent surfaces on MOPCs of various types, structures, and sizes. In particular, super-liquid-repellent drops with an underlying air layer can be created on PDMS-grafted nano-/microstructured MOPCs. Potential applications of surfaces combining liquid repellency and photocatalytic activity are also discussed; thus offering new ways of using MOPCs in a wider range of applications.     

基于荧光光谱技术的菜籽油氧化状态智能评价

菜籽油在加工及贮藏过程中，易受氧气、温度、光照等因素的影响，产生氧化酸败现象。为准确判断油脂氧化程度，实现不同氧化模式下菜籽油品质的快速判别，采用三维同步荧光光谱技术结合平行因子分析法及BP神经网络法建立菜籽油氧化状态的智能评价模型。以冷榨菜籽油为原料，将样品分别置于常温、Schaal烘箱、高温模式中氧化处理，期间采集菜籽油的三维同步荧光光谱数据及理化指标，当理化指标超出国标限定范围时，停止采集数据。结果表明，菜籽油中荧光物质在不同氧化模式中的演变规律呈显著差异，氧化温度对菜籽油荧光光谱有明显影响。常温氧化350 d与第1 d相比，菜籽油的特征荧光峰位置无变化，仅在激发波长Ex为620和660 nm附近荧光峰强度发生微弱变化；Schaal烘箱氧化26 d后，在激发波长Ex为620和660 nm附近荧光峰强度显著减弱，且在激发波长Ex为350～450 nm之间有新的荧光峰生成；高温氧化48 h后，Ex为620和660 nm处荧光峰消失，在Ex为400～550 nm处产生显著荧光峰，相对Schaal烘箱氧化，荧光波长发生一定程度红移，这是由于高温氧化过程中油脂氧化生成的物质稳定性较差引起的。利用平行因子分析法对三维同步荧光光谱数据进行分解获取有效的二维荧光光谱数据，当组分数为6，Δλ=60 nm时激发波长的载荷值最大，不同样品间差异最显著。选定Δλ=60 nm波段的二维荧光光谱数据用于智能评价，作为BP神经网络模型的输入值，以极性组分作为模型输出值，分别对菜籽油三种氧化模式数据建模训练。实验结果表明，三种氧化模式对应的训练集、验证集、测试集模型相关系数r均能达到0.9以上，其中常温氧化模式中验证集及测试集模型的相关系数r为1，输出值与目标值较接近，模型的预测效果较好；综合三种氧化模式数据建模，对应训练集、验证集、测试集模型的相关系数分别为0.999，0.913和0.988，均方误差均较小，说明该模型能准确判断菜籽油的不同氧化状态。因此，三维同步荧光光谱技术结合平行因子分析法、BP神经网络法建立快速检测模型能实现菜籽油不同氧化状态的判别，为菜籽油的氧化程度的评价提供新方法，同时为其他食用油的品质评价提供参考。     

Comparative pharmacokinetic study of four major bioactive components after oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and corticosterone‐induced depressive rats

A highly selective and efficient LC–MS/MS method was developed to determine the plasma concentration of magnolol, hesperidin, neohesperidin and geniposide following oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and depressed rats. Plasma samples were pretreated by protein precipitation with methanol. Chromatographic separation was performed on an XTerra^® MS C₁₈ column using a gradient elution with a mobile phase composed of acetonitrile–0.1% aqueous formic acid. The proposed method was validated to be specific, accurate and precise for the analytes determination in plasma samples. The calibration curves displayed good linearity over definite concentration ranges for the analytes. The intra‐ and inter‐day precision of the proposed method at three different levels were all within <11.13% and the relative errors ranged from ?8.46 to 8.93%. The recovery of the four compounds ranged from 82.72 to 89.08% and no apparent matrix effect was observed during sample analysis. After full validation, the established method was successfully applied for comparing the pharmacokinetics of four components between normal and depressed rats. The results showed that the AUC and C_max of four analytes in depressed rats were significantly different from those in normal rats and might provide helpful information to guide the clinical use of Zhi‐Zi‐Hou‐Po to treat depression.     

Diblock copolymers of polystyrene‐b‐poly(1,3‐cyclohexadiene) exhibiting unique three‐phase microdomain morphologies

The synthesis and molecular characterization of a series of conformationally asymmetric polystyrene‐block‐poly(1,3‐cyclohexadiene) (PS‐b‐PCHD) diblock copolymers (PCHD: ～90% 1,4 and ～10% 1,2), by sequential anionic copolymerization high vacuum techniques, is reported. A wide range of volume fractions (0.27 ≤ ?_PS ≤ 0.91) was studied by transmission electron microscopy and small‐angle X‐ray scattering in order to explore in detail the microphase separation behavior of these flexible/semiflexible diblock copolymers. Unusual morphologies, consisting of PCHD core(PCHD‐1,4)–shell(PCHD‐1,2) cylinders in PS matrix and three‐phase (PS, PCHD‐1,4, PCHD‐1,2) four‐layer lamellae, were observed suggesting that the chain stiffness of the PCHD block and the strong dependence of the interaction parameter χ on the PCHD microstructures are important factors for the formation of this unusual microphase separation behavior in PS‐b‐PCHD diblock copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1564–1572     

多集值信息表中的多粒度模糊决策论粗糙集

多粒度粗糙集和决策论粗糙集是Pawlak粗糙集的重要推广,目前已成为人工智能研究的热点.然而,它们大多处理的都是单值信息系统中的问题.而实际生活中绝大多数都是处理多值问题,为了解决这一问题,在多集值信息表中将多粒粗糙集与模糊决策论粗糙集相结合进行研究,提出了其在乐观,悲观情形下的上下近似,研究了一些相关性质并给出了多集值信息表中的多粒度模糊决策论粗糙集精度、粗度的概念,最后通过一个具体例子验证其有效性.     

Measurement of Ozone Production in Non-thermal Plasma Actuator Using Surface Dielectric Barrier Discharge

Plasma actuators for flow control are intensively studied, but the production of ozone by the surface dielectric barrier discharge used in the actuators has never been quantified. Since ozone is harmful to human health, it is important to quantify its production for an application of this type of actuator on a land vehicle. This paper describes an experimental study to measure the concentration of ozone produced by an actuator with different parameters: amplitude and frequency of the applied high voltage, and the electrode configuration (shape, spacing and length). The results show that, under our experimental conditions, the production of ozone is directly proportional to the power dissipation. The production rate was measured at 21 g/kWh. Although the rate is much lower than that of an industrial ozonizer, it is still far from being negligible and should be taken into account for the future application of these actuators.