Determination of panaxadiol and panaxatriol in ginseng and its preparations by capillary supercritical fluid chromatography (SFC).

Capillary supercritical fluid chromatographic (SFC) method has been developed for the determination of panaxadiol and panaxatriol in ginseng and its preparations. 0.1 g ginseng or an appropriate amount of its preparations was hydrolysed by 15% H2SO4 in an ethanol:water (1:1 v/v) solution for 4 h followed by 15% NaOH for 0.5 h. The mixture was extracted by cyclohexane. The cyclohexane extracts were purified by a partition column and concentrated by an adsorption column and then analysed by SFC. Methyltestosterone was used as the internal standard.     

Exposure dose assessment and discussion on radioisotope production and application

The exposure dose status on radioisotope production and application in China has been assessed in the paper. The average annual occupational exposure dose received by workers in the radioisotope production is about one tenth of the annual dose limit in normal situation. It is less than one twentieth for workers in the radioisotope applications. However, the annual collective dose for the latter is higher than the former by one oder of magnitude due to the larger number of workers in the application field. Although the output of radioisotopes increased doubly in 1980's as compared with 1970's, the increase on the annual collective dose was not obvious. For exposure to the public,¹³¹I for example, the collective dose in the radioisotope production decreased by one to two orders of magnitude and the releasing factor reduced by two orders of magnitude. Therefore, the exposure dose received by workers in radioisotope production and application is lower in normal situation. However, the facts worth paying attention to are that there were many events and accidents which happened in the radioisotope applications, especially at the irradiation facilities. The probability of fatal accident was as high as 10^–3 per irradiator year. In order to improve the radiation safety situation, it is imperative to conduct the safety assessment for irradiation facilities, to enhance management of the radioactive wastes and spent sources and to establish the experience feedback system.     

富烯碳原子簇的石墨层间闭合形成机理

本文提出了富烯碳原子簇的石墨层间闭合形成机理，由该机理推出的许多结果与实验事实符合很好。我们认为碳原子簇自由基的快速淬灭及其淬灭速度是富烯碳原子簇形成及其丰度的决定因素。由此得出富烯碳原子簇在给定实验条件下产生的必然性，并预言不同大小的富烯碳原子簇可以通过优化实验条件选择性地合成。     

Syntheses of seven-membered rings: ruthenium-catalyzed intramolecular [5+2] cycloadditions

The Ru-catalyzed intramolecular [5+2] cycloaddition of cyclopropylenynes is investigated with respect to the regio- and diastereoselectivity as well as the functional group compatibility of the reaction. Evidence for the mechanism as occurring through a ruthenacyclopentene intermediate is elucidated from 1) the study of the diastereoselectivity of the cycloaddition; 2) the effect of variation of substituents on the regioselectivity of cyclopropyl bond cleavage in 1,2-trans- and 1,2-cis-disubstituted cyclopropanes and 3) examples that clearly do not involve ruthenacyclohexene as intermediates as products still incorporate the cyclopropyl moiety. The scope and limitations of the Ru-catalyzed cycloaddition are discussed and compared with the Rh-catalyzed reaction. The potential power of this methodology towards natural product total synthesis is demonstrated by the formation of several polycyclic systems with the chosen reaction conditions and readily available cyclopropylenyne substrates.     

Effects of injector geometry and sample matrix on injection and sample loading in integrated capillary electrophoresis devices

The double-T injector design employed in many microchip capillary electrophoresis devices allows for the formation of very small (50-500 pL) sample plugs for subsequent analysis on-chip. In this study, we show that sample plugs formed at the channel junction can be geometrically defined. The channel width and injector symmetry prove to be of great importance to good performance. A unique pushback of solvent into the side channels can be induced when the side channels have a very low resistance to flow, and this helps to better define the injected sample plug. Samples and running buffers of differing ionic strength (e.g., 10 mM KCl buffer and 20 mM KCl sample) can yield widely variable results in terms of plug shape and amount injected (variations of 1.5 to 10x). Applying bias voltages to all the intersecting channels aids in controlling the plug shape. However, when the ionic strengths of buffer and sample are not matched, the actual amount injected (up to 10x variations) can be inconsistent with the appearance of the plug formed in the injector (up to only 30 % variations). Operating at constant pH and ionic strength produced the most consistent results. This report examines the effects of altering the injector geometry and solution ionic strengths, and presents the results of using bias voltages to control plug formation. The observed results should provide a benchmark for modeling of the fluid dynamics in channel intersections.     

Synthesis of 4-acetylisocoumarin: first total syntheses of AGI-7 and sescandelin

A practical synthetic route to 4-acetylisocoumarins and the first total synthesis of AGI-7 (5) and sescandelin (4) are described. The readily available homophthalate 8 was transformed to the vinylogous amide ester 13 in high overall yield. Upon treatment of 13 with refluxing aqueous formic acid, the desired 4-acetylisocoumarin (5) and its regioisomer 3-methyl-4-formylisocoumarin (17) were produced in a 3:1 ratio. After separation of the desired product (5) from the unwanted minor isomer, the enantioselective reduction of AGI-7 by borane in the presence of Corey's (S)-oxazaborolidine reagent afforded (+)-sescandelin (4) with a 93% ee.     

Syntheses of polyurethanes derived from oximes and their photodegradation

Polyoxime-urethanes have been synthesized from dioximes and diisocyanates, and their structures have been ascertained by elemental analysis and infrared spectroscopy. They can be represented by the general formula: These polymer films were photolyzed by using a high-pressure 100-W mercury lamp, and the rate of decomposition of the N? O bond was determined by use of ultraviolet and infrared spectra, or comparing the photochemical behavior with that of corresponding model compounds. Upon irradiating these polymers in the presence or absence of sensitizers or a hydrogen donor, there were obtained photolyzed polymers of low molecular weight, of which the molecular weights were estimated by observing the viscosity changes. To deduce the mechanism of photodegradation of polyoxime-urethane, photolysis of benzophenone oxime-phenyl urethane was investigated as a model compound.     

Novel one-dimensional tubelike and two-dimensional polycatenated metal-organic frameworks

Two novel metal-organic frameworks (MOFs) [Zn(TITMB)(OAc)](OH).8.5H(2)O (1) and [Ag(TITMB)N(3)].H(2)O (2) [TITMB = 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene, OAc = acetate anion] were synthesized and their structures were determined by X-ray crystallography. Complex 1 crystallizes in tetragonal space group P(-)4 with a = 23.2664(7) and c = 11.9890(3) A and Z = 8. 1 has a one-dimensional tubelike structure with large inner pore size of approximately 17 A. Complex 2 crystallizes in monoclinic space group C2 with a = 20.7193(10), b = 11.5677(8), and c = 12.2944(6) A, beta = 125.5770(10) degrees, and Z = 4. 2 consists of two-dimensional honeycomb networks that interpenetrate each other to generate a polycatenated structure. In these two complexes, both zinc(II) and silver(I) atoms are four-coordinated with the same tetrahedral coordination geometry. The topologies of 1 and 2 are predominated by the conformations of TITMB, which are cis, trans, trans in 1 and cis, cis, cis in 2, respectively.     

Through-space delocalized water-soluble paracyclophane bichromophores: new fluorescent optical reporters

Conjugated polymers and oligomers can serve as highly responsive fluorescent reporters for biosensor applications. However, their optical properties in aqueous media are highly dependent upon environmental conditions. The structure of the paracyclophane framework provides a platform for designing optical reporters that show little sensitivity to surfactants, and thus is well-suited for fluorescent assays. The permanent intramolecular delocalization through the paracyclophane core dominates intermolecular perturbations in spontaneously formed aggregates.