Synthesis of saccharidic polymer colloids via free radical mini‐emulsion polymerization

Polymer colloids based on 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and butyl acrylate (BA) were prepared via free radical mini‐emulsion polymerization. The kinetic and colloidal features of the copolymerization were investigated. The final particle size (D) of the sugar latexes is inversely proportional to the concentration of the anionic emulsifier (sodium dodecyl sulphate, SDS) and the non‐ionic one (alkyl polyglucoside, APG). It was also found that D is independent of the concentration of either the water‐soluble initiator (potassium persulfate, KPS), or the oil‐soluble initiator (2,2′‐azobisisobutyronitrile, AIBN). The rate of mini‐emulsion polymerization is lower in comparison with the conventional emulsion polymerization under the same conditions. The polymerization rate (R_p) and the total number of particles (N_p) are proportional to the 0.72th and 0.93th power of the SDS, and to the 1.40th and 2.22th of the APG concentration. Following reaction orders, 0.79/0.06 were obtained for R_p/N_p versus the concentration of KPS, and 0.22/?0.01 for AIBN, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

(ClAlNH)n簇合物的结构与稳定性

用量子化学从头算方法（HF／6－31G）和密度泛函理论（DFT）的B3LYP方法，以6－31G标准基组加一个极化函数，对（ClAlNH)n(n=1-10)簇合物的几何构型，电子结构和红外光谱进行了优化，并讨论了聚合反应（ClAlNH)m→(ClAlNH)n的热力学效应，结果表明，（ClAlNH)n系列簇合物的基态稳定结构为Cs(n=1),D2h(n=2),D3h(n=3),Td(n=4),Cs(n=5),D3d(n=6),Cs(n=7),S4(n=8),D3h(n=9),C2h(n=10,n=2,4,6,8,10等偶数对应的（ClAlNH)n簇化合物的结构比n等于奇数量更稳定。     

The evolution of morphology of ordered porous TiO2 films fabricated from sol-gel method assisted ZnO nanorod template

Ordered porous TiO₂ films, including TiO₂ nanotube arrays, are fabricated by a sol-gel dip-coating approach via ZnO nanorod templates obtained from aqueous solution approach. The results indicate that the morphologies of ordered porous TiO₂ films have been great affected by the sol-gel dip-coating cycle number. Open-ended TiO₂ nanotube arrays can be obtained in optimum dip-coating cycle numbers. The TiO₂ nanotubes with the inner diameter matching well with the diameters of ZnO nanorods, are well assembled and separate each other. When the cycle number is less than this optimum value, no intact porous TiO₂ film can be obtained. As the cycle number is larger than this optimum value, an ordered porous TiO₂ film with many throughout holes is formed. The evolutive mechanism of ordered porous TiO₂ films is proposed.     

Quecksilber(II)‐chlorid‐ und ‐iodid‐Komplexe von Dithia‐ und Tetrathiakronenethern

Mercury(II) Chloride and Iodide Complexes of Dithia‐ and Tetrathiacrown Ethers The complexes [(HgCl₂)₂((ch)₂30S₄O₆)] ( 1 ), [HgCl₂(mn21S₂O₅)] ( 2 ), [HgCl₂(ch18S₂O₄)] ( 3 ) and [HgI(meb12S₂O₂)]₂[Hg₂I₆] ( 4 ) have been synthesized, characterized and their crystal structures were determined. In [(HgCl₂)₂((ch)₂30S₄O₆)] two HgCl₂ units are discretely bonded within the ligand cavity of the 30‐membered dichinoxaline‐tetrathia‐30‐crown‐10 ((ch)₂30S₄O₆) forming a binuclear complex. HgCl₂ forms 1 : 1 “in‐cavity” complexes with the 21‐membered maleonitrile‐dithia‐21‐crown‐7 (mn21S₂O₅) ligand and the 18‐membered chinoxaline‐dithia‐18‐crown‐6 (ch18S₂O₄) ligand, respectively. The 12‐membered 4‐methyl‐benzo‐dithia‐12‐crown‐4 (meb12S₂O₂) ligand gave with two equivalents HgI₂ the compound [HgI(meb12S₂O₂)]₂[Hg₂I₆]. In the cation [HgI(meb12S₂O₂)]⁺ meb12S₂O₂ forms with the cation HgI⁺ a half‐sandwich complex.     

不依赖于统计模型的手性毛细管电泳分离多指标同时优化

考虑到手性毛细管电泳分离机理的复杂性，提出了不依赖于统计模型的二进制编码遗传算法多目标优化策略。根据实验参数的多少及其重要性，采用均匀设计安排完成初步实验。并用Derringer功效函数作为多指标同时优化的评价指标，以取得较高的分离度和较快分离速度；通过对实验参数给予编码，转化为二进制字符串，根据得到的总功效函数值大小进行遗传算法操作，产生新的一组实验条件。重复上述过程直到得到最佳分离条件为止。此方法成功地应用于华法令对映体的毛细管电泳分离条件优化。     

Preparation, characterization, and application of multistimuli-responsive microspheres with fluorescence-labeled magnetic cores and thermoresponsive shells

Novel functional microspheres with multistimuli-responsive properties have been prepared and characterized. The as-prepared microspheres respond to an external magnetic field, environmental temperature, and ultraviolet radiation. The in vitro drug-loading efficiency and drug-release behavior of these microspheres demonstrated that they could be used as drug carriers for drug controlled release. The results of in vivo distribution investigations of these microspheres showed that they exhibit a high magnetic-targeting effect, which holds promise for applications in various fields such as magnetic drug targeting and tissue labeling, among others.     

Silicomolybdate‐Doped PEDOT Modified Electrode: Electrocatalytic Reduction of Bromate and Oxidation of Ascorbic Acid

Electrically conducting poly(3,4‐ethylenedioxythiophene) (PEDOT) film doped with silicomolybdate (SiMo₁₂O₄₀^4? or SiMo₁₂) was synthesized by electrochemical polymerization. The synthesized film is capable of fast charge propagation during redox reactions in strong acid medium 0.2 M H₂SO₄ solution. The modified electrode was used towards reduction of bromate and successfully employed as an amperometric sensor for bromate and also above modified electrode was investigated for ascorbic acid oxidation.     

Surface-renewable cobalt(II) hexacyanoferrate-modified graphite organosilicate electrode and its electrocatalytic oxidation of thiosulfate

Cobalt(II) hexacyanoferrate (CoHCF) was deposited on graphite powder by an in situ chemical deposition procedure and then dispersed into methyltrimethoxysilane-derived gels to prepare a surface-renewable CoHCF-modified electrode. The electrochemical behavior of the modified electrode in different supporting electrolyte solutions was characterized by cyclic voltammetry. In addition, square-wave voltammetry was employed to investigate the pNa-dependent electrochemical behavior of the electrode. The CoHCF-modified electrode showed a high electrocatalytic activity toward thiosulfate oxidation and could thus be used as an amperometric thiosulfate sensor.     

四磺化酞菁钴在微乳液、醇-水体系中的二聚现象研究

采用分光光度法研究了四磺化酞菁钴（ＣｏＴＳＰｃ），在微乳液（ＴｒｉｔｏｎＸ－１００－壬烷－正戊醇－水）、醇－水（甲醇、乙醇、丙醇）体系中的二聚现象，计算了ＣｏＴＳＰｃ的二聚常数ＫＤ。结果表明，ＣｏＴＳＰｃ的二聚常数ＫＤ值随着微乳液中表面活性的浓度及醇－水溶液的介电常数的增加而减小。