Multiresidue analysis of seventeen pesticides in wine by gas chromatography with mass-selective detection

We have developed a multiresidue method permitting the simultaneous quantitation of 17 pesticides in wine: dicloran, dimethoate, diazinon, chlorpyrifos-methyl, vinclozolin, carbaryl, methiocarb, dichlofluanid, parathion-ethyl, triadimefon, procymidone, myclobutanil, iprodione, imidan, dicofol, phosalone and azinphos-methyl. Solid-phase extraction of 0.5 ml of wine sample is followed by direct injection of 1 microl of the eluent onto a DB-5 MS gas chromatographic column followed by mass-selective detection using one target and two qualifier ions for each pesticide. The extraction and injection steps are carried out with automatic instrumentation. Good resolution of all compounds was achieved with a run-time approximating 23 min. Detection and quantitation limits were around 2 microg/l and 10 microg/l, respectively, with linear calibration curves up to 3 mg/l for most constituents. Recovery in half the compounds was >90%, and >80% in most of the remainder. Imprecision (relative standard deviation) was <10% for most pesticides and <18% in all. Further analytes can be added to the repertoire without difficulty. The method merits consideration together with four other multiresidue methods now available that offer similar analytical characteristics, slower run-times, and a different selection of analytes.     

Ortho-selectivity in the nucleophilic aromatic substitution (SNAr) reactions of 3-substituted, 2,6-dichloropyridines with alkali metal alkoxides

3-Substituted, 2,6-dichloropyridines have featured in the syntheses of small molecule inhibitors of a wide variety of biological targets. Hence, the regioselective displacement of the chlorines is of significant interest. Through conducting an extensive solvent study, we have found that non-polar, aprotic solvents of low hydrogen bond basicities favour substitution of the chlorine ortho to the 3-substituent by alkali metal alkoxides. We present convincing evidence that coordination of the alkali metal counter-ion to the 3-substituent (nitro, ester, amide) is the origin of the ortho-selectivity to give a cyclic, six-membered transition state. Excellent ortho-selectivities (?98:2) for secondary and tertiary alkoxides were realized with the sodium counter-ion, whereas the more reactive primary alkoxides required the harder, more Lewis acidic lithium counter-ion.     

PHOTOCHEMICAL EXCHANGE REACTIONS OF THYMINE, URACIL AND THEIR NUCLEOSIDES WITH SELECTED AMINO ACIDS

The photoinduced exchange reactions of thymine with lysine at basic pH, using 254 nm light, have been studied. Three products have been isolated, namely, 6-amino-2-(1-thyminyl)hexanoic acid ( Ia ), 2-amino-6-(1-thyminyl)hexanoic acid ( IIa ) and 1-amino-5-(1-thyminyl)pentane ( IIIa ). Compound IIIa was shown to be a secondary product, produced by photochemical decarboxylation of Ia . Photochemical reaction of thymine with glycine and alanine at basic pH led, respectively, to formation of 2-(1-thyminyl)acetic acid ( Ic ) and 2-(1-thyminyl)propionic acid ( Id ). Compounds Ic and Id underwent photolysis to produce the decarboxylated secondary products 1-methylthymine and 1-ethylthymine, respectively. Thymidine reacts photochemically with glycine and alanine to produce the same products.
Irradiation of DNA in the presence of lysine at basic pH led to the formation of the same products formed in the thymine-lysine system, namely Ia , IIa and IIIa .
Uracil was found to undergo analogous photochemical exchange reactions with lysine to form 6-amino-2-(1-uracilyl) hexanoic acid ( Ib ), and 2-amino-6-(1-uracilyl)hexanoic acid ( IIb ). Compound Ib was found to undergo photodecarboxylation to form 1-amino-5-(1-uracilyl)pentane ( IIIb ), analogous to the secondary photoreaction of Ia . Photoreaction of uracil with 1,5-diaminopentane (cadaverine) likewise led to formation of IIIb .     

Ring opening photoreactions of cytosine and uracil with ethylamine

The photochemical reactions of cytosine (Cyt) and uracil (Ura) with ethylamine, an analog of the side chain of the amino acid lysine, have been studied. After irradiation of Cyt in aqueous ethylamine at lambda = 254 nm, N-(N'-ethylcarbamoyl)-3-aminoacrylamidine (Ia) and N-(N'-ethylcarbamoyl)-3-ethylaminoacrylamidine (Ib) were isolated as products, while irradiation of Ura gave N-(N'-ethylcarbamoyl)-3-aminoacrylamide (IIa) and N-(N'-ethylcarbamoyl)-3-ethylaminoacrylamide (IIb) as products. Studies in which Ia and IIa were incubated with ethylamine at various pH values indicate that Ib and IIb are secondary products produced via thermal reactions of Ia and IIa with ethylamine. Heating of Ia and Ib leads to ring closure with the resultant formation of 1-ethylcytosine; small amounts of 1-ethyluracil are also produced. Heating of IIa and IIb produces 1-ethyluracil as the sole product. Spectroscopic properties were determined for each of these opened ring products, as well as for N-(N'-ethylcarbamoyl)-3-amino-2-methylacrylamidine (III) and N-(N'-ethylcarbamoyl)-3-amino-2-methylacrylamide (IV). Quantum yield measurements showed that Ia was formed with a phi of 1.6 x 10(-4) at pH 9.8, while phi for formation of IIa was 7.2 x 10(-4) at pH 11.5. A profile of the relative quantum yield for formation of Ia, determined as a function of pH, showed that the maximum quantum yield occurs at around pH 9.5; the analogous profile for IIa shows a maximum quantum yield at pH 11.3 and above. Acetone sensitization does not produce Ia in the Cyt-ethylamine system, which indicates that the known triplet state of Cyt is not involved in reactions leading to this opened ring product.     

PHOTOPRODUCTS OF CHLORPROMAZINE WHICH CAUSE RED BLOOD CELL LYSIS

A mechanism for chlorpromazine (CPZ) phototoxicity has been proposed that attributes the response to formation of stable, toxic photoproducts which cause cell membrane disruption. We have characterized these toxic photoproducts as dimers and higher multimers of CPZ. Chlorpromazine solutions (3 or 10 mA/) were irradiated with a medium pressure Hg lamp filtered to exclude λ < 280 nm. Five low mol wt photoproducts were separated by high performance liquid chromatography. Two were identified as CPZ-sulfoxide and promazine. Higher mol wt photoproducts were separated by Sephadex G-50 chromatography into 3 broad bands which were characterized by their absorption and fluorescence spectra. Band A (mol wt > 800) had λ_max^abs= 263 nm, λ_max^fl= 490 nm and Band B (mol wt = 350-800) had λ_max^abs= 255 nm, λ_max^fl= 450 nm. Based on the mol wt of CPZ, Band A contained trimers and higher mol wt compounds and Band B was composed of dimeric structures. BandC(λ_max^abs= 255,310 nm; λ_max^fl= 445 nm) was composed of CPZ (mol wt = 315) and the low mol wt photoproducts. Red blood cell lysis was used as an assay for the ability of photoproducts to cause membrane disruption. Bands A and B, but not Band C, caused cell lysis. These data indicate that the CPZ photoproducts which cause cell membrane disruption are dimers (Band B) and higher multimers (Band A).     

A search algorithm for fixed-composition protein design

We present a computational protein design algorithm for finding low-energy sequences of fixed amino acid composition. The search algorithms used in protein design typically do not restrict amino acid composition. However, the random energy model of Shakhnovich suggests that the use of fixed-composition sequences may circumvent defects in the modeling of the denatured state. Our algorithm, FC_FASTER, links fixed-composition versions of Monte Carlo and the FASTER algorithm. As proof of principle, FC_FASTER was tested on an experimentally validated, full-sequence design of the beta1 domain of protein G. For the wild-type composition, FC_FASTER found a lower energy sequence than the experimentally validated sequence. Also, for a different composition, FC_FASTER found the hypothetical lowest-energy sequence in 14 out of 32 trials.     

Highly water resistant surface coating by fluoride on long persistent Sr4Al14O25:Eu/Dy phosphor

A novel and efficient method of providing moisture resistance of inorganic particles such as divalent europium activated strontium aluminate phosphors (Sr₄Al₁₄O₂₅:Eu²⁺/Dy³⁺) was developed by firing the phosphor in the presence of appropriate amount of ammonium fluoride at a temperature of 600-700 °C. Scanning electron microscopy, X-ray diffraction, FT-IR, EDAX and Photoluminescence measurements were carried out to characterize the uncoated and coated samples. The pH measurements were carried out for the water resistivity measurements. The phosphor particles became coated with a moisture-impervious thin coating that did not suppress the luminescence of the phosphor and can withstand complete immersion in water for long periods of time, showing very high water resistivity.