Sound power flux measurements in strongly exited ducts with flow

This contribution describes new robust procedures for the measurement of sound power flux at appropriate axial positions along a duct with flow, using pairs of flush wall mounted microphones, or pressure transducers. The technology includes the application of selective averaging, order tracking, and optimized sampling rate methods to identify the small fraction of the total fluctuating wave energy that is being propagated along the flow path in a reverberent, or highly reactive duct system. Such measurements can also be used to quantify the local acoustic characteristics that govern the generation, transfer, and propagation of wave energy in the system. Illustrative examples include the determination of the acoustic characteristics of individual silencing elements installed in IC engine intakes and exhausts both on the flow bench and during controlled acceleration or run down on a test bed, where the wave component spectral levels approached 170 dB.     

Enhanced (13)C PFG NMR for the study of hydrodynamic dispersion in porous media

PFG NMR methods are frequently used as a means of probing both coherent and incoherent molecular motions of fluids contained within heterogeneous porous media. The time scale over which molecular displacements can be probed in a conventional PFG NMR experiment is limited by the relaxation characteristics of (1)H - the nucleus that is typically observed. In multiphase systems, due to its sensitivity to susceptibility gradients and interactions with surfaces,(1)H signal is frequently characterized by rapid T(1) and T(2) relaxation. In this work, a heteronuclear approach to PFG NMR is demonstrated which allows the study of molecular displacement over extended time scales (and, consequently, length scales) by exploiting the longer relaxation time of (13)C. The method presented employs the DEPT technique of polarization transfer in order to enhance both the sensitivity and efficiency of (13)C detection. This hybrid coherence transfer PFG technique has been used to acquire displacement propagators for flow through a bead pack with an observation time of up to 35 s.     

Crystallization and dissolution temperatures of poly(vinyl alcohol) crystal lamellae

Poly(vinyl alcohol) single crystal platelets having a stepheight of approximately 100 A. were obtained by isothermal crystallization from dilute triethylene glycol solution. Material crystallized at temperature T_c redissolved in the same solvent at a higher temperature T_s. A plot of T_c versus T_s gave a straight line of slope 0.47. Extrapolation of this line to T_c = T_s gave (T_m)∞, which may be regarded as the dissolution temperature of the crystal of infinite stepheight. (T_m)∞ for this sample in triethylene glycol was 220°C. The crystalline nature of the platelets was established by electron and x-ray diffraction techniques. A total of three Bragg d spacings having the values of 3.9, 4.4, and 4.6 A. (±0.05 A.) were measured. These spacings were indexed as the (200), (101), and (101 ) reflections, respectively, of the monoclinic unit cell of Bunn. The x-ray diffractogram exhibits sharp intensities of the (101 ) and (101) reflections. The crystallinity calculated from the density of the poly(vinyl alcohol) precipitated from dilute solutions in triethylene glycol was 42%. Although the overall degree of crystalline perfection of this poly(vinyl alcohol) is low, the linear relationship between T_s and T_c and the formation of definite shaped single crystals when crystallized from dilute solution suggest that poly(vinyl alcohol) crystallizes in the same manner as other semicrystalline polymers.     

Thianaphthenoyltrifluoroacetone as an analytical reagent: The keto-enol tautomerism of the 2- and 3-isomers of thianaphthenoyltrifluoroacetone

Summary The keto-enol tautomerism of the 2- and 3-isomers of thianaphthenoyltrifluoroacetone has been studied and the results explained by considering the relative negativities of the 2- and 3-position of thianaphthene. The results of the comparison of the keto-enol tautomerism of 3-thianaphthenoyltrifluoroacetone to that of 2-thenoyltrifluoroacetone in 80% benzene-20% ethanol may explain in part the greater sensitivity of the former in trace metal analysis.

---

Zusammenfassung Die Keto-Enol-Tautomerie der 2- und 3-Isomeren des Thianaphthenoyltrifluoracetons wurde untersucht und mit der relativen Negativität der 2- und 3-Stellung des Thianaphtens zu erklären versucht. Der Vergleich der Keto-Enol-Tautomerie von II mit der des 2-Thenoyltrifluoracetons in BenzolÄthanol (80+20) könnte eine Erklärung für die größere Sensitivität von II bei der Spurenmetallanalyse bieten.

     

Di-2-Pyridylketoxime,a new reagent for the spectrophotometric determination of iron(II)

Di-2-pyridylketoxime is proposed for the spectrophotometric determination of iron(II). The complex is stable and exhibits an absorption maximum at 534 nm in an alkaline citrate medium. Beer's law is obeyed and the molar absorptivity is 1.5·10³. Large amounts of copper and nickel can be tolerated. The method is simple, convenient and reproducible.     

Mass spectra of some naturally occurring stictane triterpenoids and their trimethylsilyl derivatives

The mass spectra of ten di- and tri-oxygenated stictane triterpenoids and their trimethylsilyl derivatives have been studied in detail. Gas chromatography mass spectrometry of the TMS derivatives on OV-17 and OV-101 columns provided useful separations and identifications of mixtures of stictanes triterpenoids in lichen extracts. The major fragmentations involve ring C, but specific cleavages in rings A, B and E are also observed which allow the substitution pattern of the skeleton to be readily determined. The formation of an intense [M – C₅H₁₁?]⁺ ion for 22α-OTMS stictanes appears specific to their ring E configuration.     

The spectrophotometric determination of zirconium with disodium 3-hydroxy-4-[(6-methyl-2-pyridyl)azo]-2,7-naphthalenedisulfonate N-oxide

Summary The application of the reagent for the spectrophotometric determination of traces of zirconium is described. The effects due to acid concentration, reagent concentration, time and diverse ions are reported. Beer's law is obeyed and the molar absorbance coefficient at 577 nm is 3.2×10⁴.

---

Die spektrophotometrische Bestimmung von Zirkonium mit Natrium-3-hydroxy-4-[(6-methyl-2-pyridyl) azo]-2,7-naphthalindisulfonat-N-oxid

Zusammenfassung Die Anwendung des genannten Reagens auf die spektrophotometrische Bestimmung von Zirkoniumspuren wurde beschrieben. Der Einfluß der Säurekonzentration, der Reagenskonzentration, der Zeit und verschiedener Fremdionen wurde untersucht. Das Beersche Gesetz wird befolgt; der molare Extinktionskoeffizient bei 577 nm beträgt 3,2 · 10⁴.

     

A one-pot synthesis of tertiary amines from amines,lactams and urethanes

A one-pot synthesis of unsymmetrical tertiary amines from amides, lactams and urethanes has been developed. The reaction is general for all cases examined with the exception of N-aryl containing examples, which are not accessible by this method.     

Photochemical Reactions in the Synthesis of Protein–Drug Conjugates

The ability to modify biologically active molecules such as antibodies with drug molecules, fluorophores or radionuclides is crucial in drug discovery and target identification. Classic chemistry used for protein functionalisation relies almost exclusively on thermochemically mediated reactions. Our recent experiments have begun to explore the use of photochemistry to effect rapid and efficient protein functionalisation. This article introduces some of the principles and objectives of using photochemically activated reagents for protein ligation. The concept of simultaneous photoradiosynthesis of radiolabelled antibodies for use in molecular imaging is introduced as a working example. Notably, the goal of producing functionalised proteins in the absence of pre-association (non-covalent ligand-protein binding) introduces requirements that are distinct from the more regular use of photoactive groups in photoaffinity labelling. With this in mind, the chemistry of thirteen different classes of photoactivatable reagents that react through the formation of intermediate carbenes, electrophiles, dienes, or radicals, is assessed.