Efficient loading of sulfonamide safety-catch linkers by Fmoc amino acid fluorides

[reaction: see text] Fmoc-protected amino acid fluorides were found to be excellent reagents for the acylation of sulfonamide safety-catch linkers (SCL) suitable for the subsequent preparation of peptide C-terminal thioesters. High loadings were obtained on different types of resins with low levels of epimerization.     

AES investigations of plasma sprayed Al2O3 coatings on Ni

Summary The system of plasma sprayed Al₂O₃ on Ni substrates is investigated by means of AES/depth profiling. The influence of two process parameters — preoxidation procedure and spraying temperature — is examined. Rupture between substrate and ceramic layer occurs between a residual — or, in the case of excessive preoxidation, a superfluous — NiO layer on Ni, the thickness of the former depending on preoxidation conditions and the Al₂O₃ layer, the back side of which being partially covered with NiO. The thickness of this NiO layer increases up to about 1 m with the thickness of the initial NiO layer on the substrate, until this layer is about 1.3 m thick, and remains constant thereafter. The same dependence is observed for the width (0.1–1 m range) of the mixed oxide interface between the sprayed Al₂O₃ layer and the NiO layer below. These results represent the chemical contribution to adherence. Contrary to excessive preoxidation, an increase of the spraying temperature from 300°C to 500°C effects broader interfaces.This poster was awarded the First Prize in Poster Section C by the Deutscher Arbeitskreis für Spektroskopie (DASp)     

Stability of the gold(i)-phosphine bond. A comparison with other group 11 elements

The stability of gold phosphine complexes of the form [Au(PH(3))(n)()](+) (n = 1-4) and [AuCl(PH(3))(n)()] (n = 1-3) is analyzed in detail by applying quantum theoretical methods and compared to the coordination behavior of the lighter group 11 elements copper and silver. It is shown that, once [M(PH(3))(2)](+) or [MClPH(3)] (M = Cu, Ag, and Au) is formed, further coordination by PH(3) ligands is relatively weak; i.e., the energy gain to form [M(PH(3))(3)](+) from [M(PH(3))(2)](+) is less than 60 kJ mol(-)(1), and less than 100 kJ mol(-)(1) to form [MCl(PH(3))(2)] from [MClPH(3)]. Relativistic effects in gold significantly influence these factors and reduce the tendency for phosphine coordination beyond two-coordination. This implies that the most favored coordination number for gold is two with either a linear P-Au-P or P-Au-X arrangement (X = a strongly coordinating ligand like Cl(-)). Instead, X-Au-PH(3) units prefer to interact via close Au-Au contacts (aurophilic interactions) keeping the linear structure approximately intact, while the corresponding copper and silver compounds prefer PH(3) coordination to strongly bound M(2)Cl(2) units (M = Cu or Ag) where two chlorine atoms bridge the two metal atoms thus having the formal coordination number of three for copper or silver.     

Crystal Structures of Twisted Di(2-Pyridyl)ketone and Planar Azo-di(2-Pyridine) and Their Discussion Based on PM3 Enthalpy Hypersurfaces for the Isoelectronic Molecules

Single crystal structure determinations prove the two pyridine substituents in di(2-pyridyl)ketone (H₄C₄NC)₂C=O to be twisted out of the carbonyl skeleton plane by torsion angles (OCCN) of 41° and –163°, in contrast to their planar arrangement in azo-di(2-pyridine) H₄C₄NC)-N=N-(CNC₄H₄). In order to rationalize the surprising difference between the two isoelectronic molecules, approximate PM3 enthalpy of formation hypersurfaces have been calculated for each of the two ring torsions, which are assumed to be the dominant ones among the 3N – 6 = 60 degrees of freedom. For both the ketone and the azo derivative, global minima are calculated, the torsion angles of which deviate from the crystal structure results, and, therefore, support the assumption that both the experimentally determined twisting of di(2-pyridyl)ketone as well as the flattening of azo-di(2-pyridine) might be affected by the crystal packing.     

In Situ Study of the Surface Oxidation of FeCr Alloys Using Grazing Incidence X‐ray Absorption Spectroscopy (GIXAS)

The surface oxidation of FeCr alloys with 18, 28, and 43 mass‐% Cr was investigated in situ using grazing‐incidence X‐ray absorption spectroscopy (GIXAS) at the chromium and iron K‐edges. Oxidation in air was monitored in situ in the temperature range from 290 K to 680 K. The standard GIXAS data analysis is extended for the treatment of a single layer model in order to estimate the chromium concentrations of the oxide layer and of the near‐interface substrate as well as the oxide layer thickness. XANES analysis shows transitions from b.c.c. Fe to corundum type Fe₂O₃ and from b.c.c. Cr to corundum type Cr₂O₃. The initial oxide layers are 1.1‐1.4 nm thick and contain 60‐90 mass‐% chromium, while the near‐interface substrate is depleted in Cr. During heating, iron oxide growth dominates up to 560‐600 K. Then the chromium oxide layer loses its passivation effect and Cr oxidation sets in.     

Transmetallierung von Zinn(II) in [Sn(μ3‐PSitBu3)]4 durch Barium – von Sn4P4‐Heterocuban‐Strukturen zu heterobinuklearen Käfigverbindungen mit einem zentralen BanSn4−nP4‐Heterocuban‐Polyeder (n = 1, 2 und 3)

Transmetallation of Tin(II) in [Sn(μ₃‐PSitBu₃)]₄ by Barium – from Sn₄P₄ Heterocubane Structures to Heterobinuclear Cage Compounds with a Central Ba_nSn_4?nP₄ Heterocubane Polyhedron (n = 1, 2 and 3) For the preparation of compounds of the type [Ba_nSn_4?n(PSitBu₃)₄] (n = 1 ( 2 ), 2 ( 3 ) and 3 ( 4 )) two synthetic routes are applicable: in the transmetallation reaction homometallic [Sn₄(PSitBu₃)₄] ( 1 ) reacts with barium metal and in a deprotonation reaction (metallation) tri(tert‐butyl)silylphosphane reacts simultaneously with (thf)₂Ba[N(SiMe₃)₂]₂ and Sn[N(SiMe₃)₂]₂. During the transmetallation reaction mixtures of the heterobimetallic cage compounds 2 to 4 are obtained, however, analytically pure compounds 2 and 3 are accessible by the metallation reaction. Compound 4 is formed as a minor product together with 3 . Due to the larger Ba‐P bond lengths compared to the Sn‐P values the substitution of tin by barium leads to strong distortions of the heterocubane moiety. With NMR‐spectroscopic experiments one could show that all the above mentioned compounds form Ba_nSn_4?nP₄ heterocubane cage structures.     

AES investigations on starting powders for high performance ceramics

AES depth profiles on ceramic powders (untreated/hydrolyzed/oxidized/ (Al, Y)₂O₃ coated Si₃N₄, [BaO, SiO₂] coated Al₂O₃) are feasible on thin, homogeneous layers or m sized agglomerations prepared on an Au foil. By means of the depth profiles one can qualitatively characterize the coating around the particles. Factor analysis of the depth profiles on the differently treated Si₃N₄ powders suggests the existence of an Si₂N₂O phase on the oxidized sample.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

Structure and Dynamics of Hydrogen Chelates. Part 1. NMR-spectroscopic studies in the quinazoline-2-acetonitrile series

To get informations on both the structure and dynamics of hydrogen chelates 1 of heteroaromatic systems, a great variety of quinazoline-2-acetonitrile chelates were synthesized (see 2–4 ). Similarly to the situation of the corresponding H-chelates in the pyrimidine-2-acetonitrile series, the investigation of these new derivatives 2–4 by NMR spectroscopic methods (DNMR, COSY, NOESY, ROESY, EXSY, HMQC, HMBC) confirms the presence of an equilibrium of the two possible H-chelate structures (two ‘rotamers’ I and II , i.e., (E)/(Z) isomers; see Scheme). The corresponding equilibria I ? II were determined by complete ¹H-NMR signal assignment at low temperatures (after freezing the rotational processes). In addition, the tautomer equilibria A ? B (relative energies of the two minima of the nonsymmetrical double-well potential) for both ‘rotamers’ are ascertained by H,H and C,H couplings. The results are an important basis for the interpretation of both the UV/VIS absorptions and the dependence of fluorescence and fluorescence quantum yields on temperature.