Hydroxylation of camphor by reduced oxy-cytochrome P450cam: mechanistic implications of EPR and ENDOR studies of catalytic intermediates in native and mutant enzymes.

We have employed gamma-irradiation at cryogenic temperatures (77 K and also approximately 6 K) of the ternary complexes of camphor, dioxygen, and ferro-cytochrome P450cam to inject the "second" electron of the catalytic process. We have used EPR and ENDOR spectroscopies to characterize the primary product of reduction as well as subsequent states created by annealing reduced oxyP450, both the WT enzyme and the D251N and T252A mutants, at progressively higher temperatures. (i) The primary product upon reduction of oxyP450 4 is the end-on, "H-bonded peroxo" intermediate 5A. (ii) This converts even at cryogenic temperatures to the hydroperoxo-ferriheme species, 5B, in a step that is sensitive to these mutations.Yields of 5B are as high as 40%. (iii) In WT and D251N P450s, brief annealing in a narrow temperature range around 200 K causes 5B to convert to a product state, 7A, in which the product 5-exo-hydroxycamphor is coordinated to the ferriheme in a nonequilibrium configuration. Chemical and EPR quantitations indicate the reaction pathway involving 5B yields 5-exo-hydroxycamphor quantitatively. Analogous (but less extensive) results are seen for the alternate substrate, adamantane. (iv) Although the T252A mutation does not interfere with the formation of 5B, the cryoreduced oxyT252A does not yield product, which suggests that 5B is a key intermediate at or near the branch-point that leads either to product formation or to nonproductive "uncoupling" and H(2)O(2) production. The D251N mutation appears to perturb multiple stages in the catalytic cycle. (v) There is no spectroscopic evidence for the buildup of a high-valence oxyferryl/porphyrin pi-cation radical intermediate, 6. However, ENDOR spectroscopy of 7A in H(2)O and D(2)O buffers shows that 7A contains hydroxycamphor, rather than water, bound to Fe(3+), and that the proton removed from the C(5) carbon of substrate during hydroxylation is trapped as the hydroxyl proton. This demonstrates that hydroxylation of substrates by P450cam in fact occurs by the formation and reaction of 6. (vi) Annealing at > or = 220 K converts the initial product state 7A to the equilibrium product state 7, with the transition occurring via a second nonequilibrium product state, 7B, in the D251N mutant; in states 7B and 7 the hydroxycamphor hydroxyl proton no longer is trapped. (vii) The present results are discussed in the context of other efforts to detect intermediates in the P450 catalytic cycle.     

On-chip definition of picolitre sample injection plugs for miniaturised liquid chromatography

High-speed counter-current chromatography was applied to the preparative separation and purification of naphthopyranone glycosides from a crude 70% ethanolic extract of the capitula of Paepalanthus microphyllus. The solvent system used was composed of water-ethanol-ethyl acetate-hexane (10:4:10:4, v/v). This technique led to the separation of four different naphthopyranone glycosides in pure form in only 7 h.     

Preparation of polyetherol-appended sulfur porphyrazines and investigations of peripheral metal ion binding in polar solvents

We describe the complete synthesis and characterization of a new family of peripherally functionalized porphyrazines (pz's) with four, three, or two (in a trans conformation) bis[thioethoxy(ethoxy)ethanol] moieties appended at the pyrroles. These "polyetherol" groups serve as weak exocyclic binding sites for a number of metal ions and also provide solubility of the pz's in low molecular-weight alcohols and water. Electronic spectra of the modified porphyrazines exhibit distinct changes in the visible region (both absorbance and fluorescence) in response to treatment with Ag+, Pb2+, Cd2+, Cs+, and Ni2+ in solution. Such properties make these compounds intriguing candidates for incorporation into the transducer layers in optically based chemical sensors.     

Dynamic docking of cytochrome b5 with myoglobin and alpha-hemoglobin: heme-neutralization "squares" and the binding of electron-transfer-reactive configurations

Intracomplex electron transfer (ET) occurs most often in intrinsically transient, low affinity complexes. As a result, the means by which adequate specificity and reactivity are obtained to support effective ET is still poorly understood. We report here on two such ET complexes: cytochrome b5 (cyt b5) in reaction with its physiological partners, myoglobin (Mb) and hemoglobin (Hb). These complexes obey the Dynamic Docking (DD) paradigm: a large ensemble of weakly bound protein-protein configurations contribute to binding in the rapid-exchange limit, but only a few are ET-active. We report the ionic-strength dependence of the second-order rate constant, k2, for photoinitiated ET from within all four combinations of heme-neutralized Zn deuteroporphyrin-substituted Mb/alphaHb undergoing ET with cyt b5, the four "corners" of a "heme-neutralization square". These experiments provide insights into the relative importance of both global and local electrostatic contributions to the binding of reactive configurations, which are too few to be observed directly. To interpret the variations of k2 arising from heme neutralization, we have developed a procedure by which comparisons of the ET rate constants for a heme-neutralization square permit us to decompose the free energy of reactive binding into individual local electrostatic contributions associated with interactions between (i) the propionates of the two hemes and (ii) the heme of each protein with the polypeptide of its partner. Most notably, we find the contribution from the repulsion between propionates of partner hemes to the reactive binding free energy to be surprisingly small, DeltaG(Hb) approximately +1 kcal/mol at ambient temperature, 18 mM ionic strength, and we speculate about possible causes of this observation. To confirm the fundamental assumption of these studies, that the structure of a heme-neutralized protein is unaltered either by substitution of Zn or by heme neutralization, we have obtained the X-ray structure of ZnMb prepared with the porphyrin dimethyl ester and find it to be nearly isostructural with the native protein.     

Structural characterization of a rigidified threading bisintercalator

NMR spectroscopy was used to explore the sequence-specific interaction of DNA with a new threading bisintercalator (C1) consisting of two intercalating 1,4,5,8-naphthalenetetracarboxylic diimide (NDI) units connected by a rigid, tricyclic spiro linker. A structural model of C1 complexed to d(CGGTACCG)(2) was calculated using distance constraints obtained from solution NMR data. The model was also supported by the results from residual dipolar coupling (RDC) measurements obtained using Pf1-phage as a cosolvent. According to the model, the central cyclohexane ring of the linker connecting the two NDI units lies flat in the minor groove of DNA. Linker length, hydrogen bonding, steric, and hydrophobic factors all appear to contribute to the observed sequence specificity of binding. These results serve to illustrate the versatility of threading polyintercalation given that, in a previous study, a ligand consisiting of two NDI units joined by a flexible peptide linker was shown to bind sequence specifically within the major groove of this same sequence of DNA.     

Testing if the interstitial atom, X, of the nitrogenase molybdenum-iron cofactor is N or C: ENDOR, ESEEM, and DFT studies of the S = 3/2 resting state in multiple environments

A high-resolution (1.16 A) X-ray structure of the nitrogenase molybdenum-iron (MoFe) protein revealed electron density from a single N, O, or C atom (denoted X) inside the central iron prismane ([6Fe]) of the [MoFe7S9:homocitrate] FeMo-cofactor (FeMo-co). We here extend earlier efforts to determine the identity of X through detailed tests of whether X = N or C by interlocking and mutually supportive 9 GHz electron spin echo envelope modulation (ESEEM) and 35 GHz electron-nuclear double resonance (ENDOR) measurements on 14/15N and 12/13C isotopomers of FeMo-co in three environments: (i) incorporated into the native MoFe protein environment; (ii) extracted into N-methyl formamide solution; and (iii) incorporated into the NifX protein, which acts as a chaperone during FeMo-co biosynthesis. These measurements provide powerful evidence that X not equal N/C, unless X in effect is magnetically decoupled from the S = 3/2 electron spin system of resting FeMo-co. They reveal no signals from FeMo-co in any of the three environments that can be assigned to X from either 14/15N or 13C: If X were either element, its maximum observed hyperfine coupling at all fields of measurement is estimated to be A(14/15NX) < 0.07/0.1 MHz, A(13CX) < 0.1 MHz, corresponding to intrinsic couplings of about half these values. In parallel, we have explicitly calculated the hyperfine tensors for X = 14/15N/13C/17O, nuclear quadrupole coupling constant e2qQ for X = 14N, and hyperfine constants for the Fe sites of S = 3/2 FeMo-co using density functional theory (DFT) in conjunction with the broken-symmetry (BS) approach for spin coupling. If X = C/N, then the decoupling required by experiment strongly supports the "BS7" spin coupling of the FeMo-co iron sites, in which a small X hyperfine coupling is the result of a precise balance of spin density contributions from three spin-up and three spin-down (3 upward arrow:3 downward arrow) iron atoms of the [6Fe] prismane "waist" of FeMo-co; this would rule out the "BS6" assignment (4 upward arrow:2 downward arrow for [6Fe]) suggested in earlier calculations. However, even with the BS7 scheme, the hyperfine couplings that would be observed for X near g2 are sufficiently large that they should have been detected: we suggest that the experimental results are compatible with X = N only if aiso(14/15NX) < 0.03-0.07/0.05-0.1 MHz and aiso(13CX) < 0.05-0.1 MHz, compared with calculated values of aiso(14/15NX) = 0.3/0.4 MHz and aiso(13CX) = 1 MHz. However, the DFT uncertainties are large enough that the very small hyperfine couplings required by experiment do not necessarily rule out X = N/C.