Considerations on material composition for low-loss hollow-core integrated optical waveguides

The role of cladding bilayer material compositions to obtain low-loss hollow-core integrated optical waveguides was studied. Using the simple Fresnel reflection formulae, the optimal material composition was determined. It is shown that using bilayers with higher index-contrast does not always lead to a lower loss for (quasi-)linearly polarized modes. Based on that knowledge, structures that exhibit very low leakage loss for quasi-TE₀₀ mode are proposed and designed using Si-compatible materials.     

Parameters affecting microwave-assisted extraction of organophosphorus pesticides from agricultural soil

This work describes an optimised method for the determination of six representative organophosphorus pesticides (OPPs) (diazinon, parathion, methyl pirimiphos, methyl parathion, ethoprophos, and fenitrothion) in agricultural soils. The method is based on microwave-assisted extraction using a water-methanol modified mixture for desorption and simultaneous partitioning on n-hexane (MAEP), together with gas chromatography-flame photometric detection (GC-FPD). To improve GC-FPD signals (peak intensity and shape) olive oil was used effectively as a "matrix mimic". The optimisation of the extraction method was achieved in two steps: an initial approach through experimental design and principal component analysis where recovery of compounds using a water-methanol mixture ranged from 54 to 77%, and the second one by studying the addition of KH2PO4 to the extracting solution where recoveries were significantly increased, molecular replacing of OPPs from adsorption sites by phosphate being the probable extraction mechanism. Under optimised conditions, recoveries of pesticides from different soils were higher than 73%, except for methyl parathion in some soils, with SD equal or lower than 11% and detection limits ranging from 0.004 to 0.012 microg g(-1). The proposed method was used to determine OPPs in soil samples from different agricultural zones of Chile.     

Interactions of neutral and singly charged keV atomic particles with gas-phase adenine molecules

KeV atomic particles traversing biological matter are subject to charge exchange and screening effects which dynamically change this particle's effective charge. The understanding of the collision cascade along the track thus requires a detailed knowledge of the interaction dynamics of radiobiologically relevant molecules, such as DNA building blocks or water, not only with ionic but also with neutral species. We have studied collisions of keV H(+), He(+), and C(+) ions and H(0), He(0), and C(0) atoms with the DNA base adenine by means of high resolution time-of-flight spectrometry. For H(0) and H(+) we find qualitatively very similar fragmentation patterns, while for carbon, strong differences are observed when comparing C(0) and C(+) impact. For collisions with He(0) and He(+) projectiles, a pronounced delayed fragmentation channel is observed, which has not been reported before.     

Bridging the pressure gap in model systems for heterogeneous catalysis with high-pressure scanning tunneling microscopy

A high-pressure scanning tunneling microscope (HP-STM) enabling imaging with atomic resolution over the entire pressure range from ultrahigh vacuum (UHV) to one bar has been developed. By means of this HP-STM we have studied the adsorption of hydrogen on Cu(110), CO on Pt(110) and Pt(111), and NO on Pd(111) at high pressures. For all of these adsorption systems we find that the adsorption structures formed at high pressures are identical to high-coverage structures formed at lower pressures and temperatures. We thus conclude that for these systems the so-called pressure gap can be bridged, i.e. the results obtained under conventional surface science conditions can be extrapolated to higher pressures. Finally, we use the HP-STM to image the CO-induced phase separation of a Au/Ni(111) surface alloy in real time, whereby demonstrating the importance of catalyst stability in the study of bimetallic systems.     

Quantum computing by an optimal control algorithm for unitary transformations

Quantum computation is based on implementing selected unitary transformations representing algorithms. A generalized optimal control theory is used to find the driving field that generates a prespecified unitary transformation. The approach is independent of the physical implementation of the quantum computer and it is illustrated for one and two qubit gates in model molecular systems, where only part of the Hilbert space is used for computation.     

Oxyallyl exposed: an open-shell singlet with picosecond lifetimes in solution but persistent in crystals of a cyclobutanedione precursor

Photoinduced decarbonylation of 2,4-bis(spirocyclohexyl)-1,3-cyclobutanedione 1 in the crystalline solid state resulted in formation of a deep blue transient with λ(max) = 550 nm and a half-life of 42 min at 298 K, identified as kinetically stabilized oxyallyl. Support for an open-shell singlet species was obtained by spectroscopic analysis and (4/4) CASSCF calculations with the 6-31+G(d) basis set and multireference MP2 corrections. The electronic spectrum of the singlet biradical, confirmed by femtosecond pump-probe studies in solution, was matched by coupled cluster calculations with single and double corrections.     

Possibilities and pitfalls in analyzing (upgraded) pyrolysis oil by size exclusion chromatography (SEC)

The applicability of size exclusion chromatography (SEC) to analyze (upgraded) pyrolysis oil samples has been studied using model compounds, pyrolysis oils and hydrodeoxygenated pyrolysis oils. The assumptions needed for the conversion of the chromatogram to the M_w-distribution were validated. It was shown that the conversion of elution volume to molecular weight (based on polystyrene calibration curves) can introduce substantial errors in the prediction of the molecular weight. The conversion of RID response to W(log M) (as plotted on the y-axis of the M_w-distribution) is based on the assumption of a compound independent RID response factor and linear response to concentration. While the latter was shown to be true within the concentration range studied, the former was not true: the RID response factor depends on the type of (upgraded) pyrolysis oil. It was shown that within a single pyrolysis oil sample, the RID response for the low molecular weight fraction was a factor 3 lower than the high molecular weight fraction. Furthermore long term column fouling can influence SEC results that cannot be corrected with regular polystyrene recalibrations.Based on the results we recommend SEC not to be used as a quantitative method for characterization (upgraded) pyrolysis oil samples, but as a tool to compare (upgraded) pyrolysis oil samples, preferably prepared using incremental operating conditions and expected to have similar molecular composition. This work has further shown that (i) the ∫UVDdv/∫RIDdv ratio can be used as an indication of the sum of the relative aromaticity and conjugated double bond content for (upgraded) pyrolysis oil, and (ii) the negative peak area appearing in the low molecular weight part of the chromatogram can be used to estimate the water content of (upgraded) oil samples.     

An enantioselective synthesis of (S)-(+)-3-aminomethyl-5-methylhexanoic acid via asymmetric hydrogenation

A concise enantioselective synthesis of (S)-(+)-3-aminomethyl-5-methylhexanoic acid (1, Pregabalin) has been developed. The key step is the asymmetric hydrogenation of a 3-cyano-5-methylhex-3-enoic acid salt 2 with a rhodium Me-DuPHOS catalyst, providing the desired (S)-3-cyano-5-methylhexanoate 3 in very high ee. Subsequent hydrogenation of the nitrile 3 with a heterogeneous nickel catalyst provides Pregabalin 1 in excellent overall yield and purity.     

Quantification of ion-induced molecular fragmentation of isolated 2-deoxy-D-ribose molecules

Recent experiments on low energy ion-induced damage to DNA building blocks indicate that ion induced DNA damage is dominated by deoxyribose disintegration (Phys. Rev. Lett., 2005, 95, 153201). We have studied interactions of keV H+ and He(q+) with isolated deoxyribose molecules by means of high resolution time-of-flight spectrometry. Extensive statistical fragmentation of the molecules is observed. The fragment distribution is found to follow a power law dependence. The exponent can be used to characterize and quantify the molecular damage.