Waveguide tapering for beam-width control in a waveguide transducer

In a waveguide transducer that transmits an ultrasonic wave through a waveguide unit to a test structure, it is most preferred to send a non-dispersive ultrasonic wave of a narrow beam width. However, there is an unresolved conflict between the generation of the non- or less-dispersive wave and the transmission of a narrow-beam wave into a test structure. Among others, the thickness of the waveguide unit in a waveguide transducer is the key variable determining these two conflicting criteria, but the use of a uniformly-thick waveguide of any thickness cannot fulfill the two conflicting criteria simultaneously. In this study, we propose a specially-engineered tapered waveguide unit for the simultaneous satisfaction. An excitation unit is installed at the end of the thin region of the tapered waveguide and generates only the lowest non-dispersive shear-horizontal wave. Then the generated wave propagates through the tapered region of the waveguide unit and reaches the thick region of the waveguide with insignificant mode conversion to higher modes. If the tapered waveguide is used, the surviving lowest mode in the thick region of the waveguide is shown to carry most of the transmitted power and is finally propagated into a test structure. Because the beam size of the propagated wave and the thickness of the contacting waveguide region are inversely related, the thick contacting region of the tapered waveguide ensures narrow beam width. Numerical and experimental investigations were performed to check the effectiveness of the proposed waveguide-tapering approach.     

Composite Silica Particles Using a Mixture of Organosilane Monomers

Composite silica particles were synthesized by a two-step (acid-base) process in an aqueous solution with a mixture of organoalkoxysilane monomers. The two-step process separates the hydrolysis and condensation procedures to easily control condensation rate. In this study, the silane monomers used were phenyltrimethoxysilane (PTMS), vinyltrimethoxysilane (VTMS), methyltrimethoxysilane (MTMS), and tetraethyl-orthosilicate (TEOS). The physical properties of the resultant composite particles were investigated with the change in the molar ratio of monomers. The size of the particles increased with increasing the molar ratio of R_aSi(OR)₃/R_bSi(OR)₃ or R_aSi(OR)₃/TEOS (R_a: phenyl; R_b: vinyl, methyl).     

Functional involvement of src and focal adhesion kinase in a CD99 splice variant-induced motility of human breast cancer cells

Earlier report showed that expression of a splice variant of CD99 transmembrane protein increases invasive ability of human breast cancer cells. Cell motility was also significantly enhanced by the CD99 splice variant expression. In an effort to identify the cellular components that mediate a signal transduction pathway triggered by the CD99 splice variant, known signal path inhibitors were examined for their effects on the motility of the CD99 splice variant-transfected MDA-MB-231 breast cancer cells. Phenylarsine oxide, an inhibitor of phosphatase specific for focal adhesion kinase, and PP1, an inhibitor of src kinase family, significantly suppressed motility of the cells. Among different types of src transfectant clones generated, kinase-negative mutant src transfectant cells were 80% less motile than the mock cells transfected with an empty-vector, while v-src and c-src transfectants exhibited cell motility levels at or slightly above the mock transfectant. These results suggest that src and focal adhesion kinase mediate the intracellular signaling pathway of a CD99 splice variant for the induction of motility of human breast cancer cells.     

Preparation of Silver Nanoparticles through Alcohol Reduction with Organoalkoxysilanes

Silver nanoparticles of narrow size distribution were prepared through the chemical reduction in an alcohol solution with several organoalkoxysilanes. In this system, organoalkoxysilanes served as a stabilizer, protecting silver nanoparticles from aggregation. The changes in size and morphology of colloidal silver nanoparticles were investigated with the addition of organoalkoxysilanes such as 3-aminopropyltriethoxysilane (APS), methyltriethoxysilane (MTS), phenyltrimethoxysilane (PTS), vinyltriethoxysilane (VTS), and 3-glycidoxypropyltrimethoxysilane (GPS) as stabilizers. The organic functional groups of organoalkoxysilanes interact with silver ions and clusters, which stabilize silver nanoparticles in the system. The silver nanoparticles obtained were characterized with transmission electron microscopy (TEM), UV-vis spectroscopy, etc.     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

Analyses of the TCR repertoire of MHC class II-restricted innate CD4+ T cells

Analysis of the T-cell receptor (TCR) repertoire of innate CD4⁺ T cells selected by major histocompatibility complex (MHC) class II-dependent thymocyte–thymocyte (T-T) interaction (T-T CD4⁺ T cells) is essential for predicting the characteristics of the antigens that bind to these T cells and for distinguishing T-T CD4⁺ T cells from other types of innate T cells. Using the TCR^mini Tg mouse model, we show that the repertoire of TCRα chains in T-T CD4⁺ T cells was extremely diverse, in contrast to the repertoires previously described for other types of innate T cells. The TCRα chain sequences significantly overlapped between T-T CD4⁺ T cells and conventional CD4⁺ T cells in the thymus and spleen. However, the diversity of the TCRα repertoire of T-T CD4⁺ T cells seemed to be restricted compared with that of conventional CD4⁺ T cells. Interestingly, the frequency of the parental OT-II TCRα chains was significantly reduced in the process of T-T interaction. This diverse and shifted repertoire in T-T CD4⁺ T cells has biological relevance in terms of defense against diverse pathogens and a possible regulatory role during peripheral T-T interaction.     

Solid-state extrusion of chain-extended polyethylene

Billets of chain-extended polyethylene were prepared from Alathon 7050 (M_w 59,000, M_n 19,000) in an Instron capillary rheometer by crystallization at a constant pressure of 460 MPa, at a series of teimperatures from 198 to 221°C corresponding to varying degrees of undercooling. This gives chain-extended morphologies with a range of crystallinites and lamellar thicknesses. The billets were then solid-state extruded at 100°C through a conical die with 20° entrance angle up to an extrusion draw ration 23.4. Thermal behavior was studied with differential scanning calorimetry. The orientation function measured by wide-angle x-ray diffraction showed higher orientation function measured by wide-angle x-ray diffraction showed higher orientation at equivalent draw ratio when the initial billets were crystallized at lower temperatures. Drawing efficiency, defined as the ratio of molecular draw ratio (from shrinkage) to extrusion draw ratio correspondingly increases, reaching a maximum of 0.71 in our solid-state extrusion. These studies show that highly chain-extended polyethylene, i.e., with few chain entanglements, draws poorly. Drawability was improved by increasing chain entanglements by lowering the crystallization temperature. Electron micrographs of fracture surface replicas of extrudates revealed the coexistence of undeformed, tilted, partially drawn lamellae and fibrillar structure consistent with the cahange of morphologies in Peterlin's model of plastic deformation.     

Ultimate Charge Extraction of Monolayer PbS Quantum Dot for Observation of Multiple Exciton Generation

Multiple exciton generation (MEG) has great potential to improve the Shockley-Queisser (S-Q) efficiency limitation for colloidal quantum dot (CQD) solar cells. However, MEG has rarely been observed in CQD solar cells because of the loss of carriers through the transport mechanism between adjacent QDs. Herein, we demonstrate that excess charge carriers produced via MEG can be efficiently extracted using monolayer PbS QDs. The monolayer PbS QDs solar cells exhibit α=1 in the light intensity dependence of the short-circuit current density J_sc (J_sc∝I^α) and an internal quantum efficiency (IQE) value of 100 % at 2.95 eV because of their very short charge extraction path. In addition, the measured MEG threshold is 2.23 times the bandgap energy (E_g), which is the lowest value in PbS QD solar cells. We believe that this approach can provide a simple method to find suitable CQD materials and design interface engineering for MEG.     

Frequency-dependent interpolation rules using first derivatives for oscillatory functions

We construct frequency-dependent rules to interpolate oscillatory functions y(x)$y(x)$ with frequency ω$\omega$ of the form,

y(x)=_f1(x)cos(ωx)+_f2(x)sin(ωx),$y(x)=f_1(x)\cos (\omega x)+f_2(x)\sin (\omega x)\text{,}$