Surface plasmon resonance sensors based on Ag-metalized nanolayer in microstructured optical fibers

Surface plasmon resonance sensors based on Ag-metalized nanolayer in microstructured optical fibers are theoretically analyzed by using finite element method (FEM). In our simulations we use Drude-Lorentz model to describe the metal dielectric constant. The numerical results show that the sensitivity of Ag-metalized SPR sensor could reach 1167 nm/RIU and corresponding resolution is 8.57×10⁻⁵ RIU. Compared to conventional Au-metalized SPR sensors the performance of our device is obviously better.     

Quantum secret sharing protocol with four state Grover algorithm and its proof-of-principle experimental demonstration

In this article, we propose a three-party quantum secret sharing protocol with four-state Grover algorithm. The protocol has several advantages. It uses only four initial states which simplifies its experimental implementation. It has a higher encoding capacity, each two-qubit state provides two bits of information. We have experimentally demonstrated the protocol in a nuclear magnetic resonance quantum information processor successfully.     

Elastic exciton-exciton scattering in photoexcited carbon nanotubes

We report on original nonlinear spectral hole-burning experiments in single wall carbon nanotubes that bring evidence of pure dephasing induced by exciton-exciton scattering. We show that the collision-induced broadening in carbon nanotubes is controlled by exciton-exciton scattering as for Wannier excitons in inorganic semiconductors, while the population relaxation is driven by exciton-exciton annihilation as for Frenkel excitons in organic materials. We demonstrate that this singular behavior originates from the intrinsic one-dimensionality of excitons in carbon nanotubes, which display unique hybrid features of organic and inorganic systems.     

Search for hadronic decays of a light Higgs boson in the radiative decay Υ→γA0

We search for hadronic decays of a light Higgs boson (A(0)) produced in radiative decays of an Υ(2S) or Υ(3S) meson, Υ→γA(0). The data have been recorded by the BABAR experiment at the Υ(3S) and Υ(2S) center-of-mass energies and include (121.3±1.2)×10(6) Υ(3S) and (98.3±0.9)×10(6) Υ(2S) mesons. No significant signal is observed. We set 90% confidence level upper limits on the product branching fractions B(Υ(nS)→γA(0))B(A(0)→hadrons) (n=2 or 3) that range from 1×10(-6) for an A(0) mass of 0.3 GeV/c(2) to 8×10(-5) at 7 GeV/c(2).     

皮肤晚期糖基化终末产物的自体荧光光谱特性

在分析晚期糖基化终末产物(Advanced glycation end products,AGEs)标准品三维荧光光谱和皮肤中AGEs自体荧光光谱的基础上,确定了皮肤中AGEs的最佳激发波长为370 nm.使用自行设计的皮肤荧光光谱检测装置对正常人和糖尿病患者皮肤AGEs的荧光光谱进行了检测,结果表明:在418,450...     

Be(d,n)反应中子源能谱测量及应用

 利用中子飞行时间技术和BC501A液体闪烁探测器的粒子分辨特性,测量了0°方向、20 MeV氘束轰击厚金属铍靶反应产生的中子源能谱,测量的中子能谱范围为0.7～25.0 MeV。在60°方向放置芪晶体闪烁探测器,由刻度好的BC501A液体闪烁探测器归一校正后,用于中子源强度监测。利用Be(d, n) 反应中子源,采用单粒子灵敏度标定方法,实验标定了0.75~15.75 MeV能量范围内的薄膜闪烁探测器中子能量响应曲线,实验结果与蒙特卡罗模拟计算结果在8%的不确定度范围内一致。     

带三次非线性项的四阶Schr(o)dinger方程的分裂多辛算法

对一类带三次非线性项的四阶Schr(o)dinger方程提出分裂多辛格式.其基本思想是将多辛算法和分裂方法相结合,既具有多辛格式固有的保多辛几何结构的特性,又发挥了分裂方法在计算上灵活高效的特点.数值实验结果表明,分裂多辛格式比其它传统的多辛格式更节约计算时间和计算机的内存,从而更加优越.     

灵敏度控制思想在主动膜系设计中的快速实现算法

 基于斜入射薄膜制备实践中镀膜误差对光谱性能的严重退化影响的认识,提出了一种基于灵敏度控制思想的主动膜系设计方法。在深入分析了镀膜中膜层结构参数误差的分布规律的基础上,运用膜系光谱系数关于膜层参数的导数计算的解析模型,建立了膜系灵敏度的定量计算模型和快速实现算法。以一45°入射高精度消偏振增透膜的设计实验为例,探讨了灵敏度控制思想在膜系设计中的可行性、快速性和有效性。结果表明,这一新型设计方法不会显著增加程序时间消耗,能获得具有良好可镀制性能的薄膜,对于正入射和宽角度入射膜同样适用,而且可以避免昂贵的失败试镀和采样,有助于缩短新薄膜的生产周期,特别是对于高精度斜入射薄膜的重复性制备具有重要意义。     

越南火龙果冷藏现状分析

随着全球化经济的快速发展,食品冷藏技术日益重要.文中综述了越南火龙果的现有冷藏技术及其存在的问题,并提出解决方案.     

High-speed scanning fiber-optic heterodyne interferometer using a micro-electro-mechanical system mirror and an f-theta lens

This paper describes a novel fiber-coupled heterodyne interferometer using a micro-electro-mechanical system (MEMS) mirror and an f-theta lens. In this interferometer system, the cross-polarized laser beams operating at 2 μm with the frequency difference of 100 kHz are introduced by means of the two acousto-optic modulators (AOM). The sample with diameter of 300 mm is uniformly scanned by the 1 mm laser beam with the help of the combined optical scanning configuration, a MEMS mirror and an f-theta lens. The output intermediate signal from the two channels, reference channel and the measurement channel, are processed in the 12 bit analog-to-digital (A/D) process system. Details of our interferometer scheme are discussed.