Abscheidung von Kohlendioxid: Perspektiven für neue Materialien

Der stark ansteigende Kohlendioxidgehalt in der Atmosphäre ist eines der drängendsten Umweltprobleme unserer Zeit. Eine Option zur Verringerung anthropogener CO₂‐Emissionen ist die Abscheidung und Speicherung von Kohlendioxid (Carbon Capture and Storage, CCS) an Punktquellen wie Kraftwerken. Durch diese Sequestrierung steigt allerdings der Energiebedarf der Kraftwerke um 25–40 %. Wir berichten hier über die Technologien zur Abscheidung, die zur Verringerung der CO₂‐Emissionen wahrscheinlich am besten geeignet sind. Dazu zählen Postcombustion‐Verfahren, bei denen die Abscheidung nach der Verbrennung stattfindet (vor allem die CO₂/N₂‐Separation), Precombustion‐Verfahren, bei denen CO₂/H₂‐Gemische eingesetzt werden, und die Konditionierung von Erdgas (CO₂/CH₄). Der Schlüssel zu deutlichen Fortschritten sind bessere Trennmittel zur Separation. Wir werden hier aktuelle Entwicklungen und neuartige Konzepte zur CO₂‐Abtrennung durch Lösungsmittel‐Absorption, chemische und physikalische Adsorption und Membranen schildern und besonders auf Fortschritte auf dem wachsenden Gebiet Metall‐organischer Gerüste eingehen.     

A multiresidue method for the determination 234 pesticides in Korean herbs using gas chromatography mass spectrometry

A rapid, specific and sensitive multiresidue method based on dispersive solid phase extraction sample preparation and gas chromatography with the mass spectrometric detection for the analysis of 234 pesticides in Korean herbs (Acanthopanax senticosus, Morus alba L., Hovenia dulcis) has been developed. Method recoveries were found to be between 62 and 119% with relative standard deviation lower than 21% for all compounds in the concentration range of 0.05 to 0.400 mg kg^? 1. Limits of quantification of most compounds are below 0.050 mg kg^? 1. The data demonstrate that this method was successfully used for analysis of 234 pesticides in Korean herbs.     

Synergistic Effect of Ultrasound and Thiazone–PEG 400 on Human Skin Optical Clearing In Vivo

In this paper, we propose a new physical method in combination with mixed solution of thiazone and polyethylene glycol 400 (thiazone PEG 400 solution) penetration into tissue to assess the skin optical clearing. Four treatments were performed: (1) control group (C); (2) polyethylene glycol 400 (PEG400); (3) 0.25% thiazone (0.25%T); (4) 0.25% thiazone and 5-min ultrasound (0.25%T/SP). The diffuse reflectance spectra and imaging depth of human skin in vivo at different times were measured by spectroscopy and optical coherence tomography (OCT). The optical clearing efficacy of skin was qualitatively and quantitatively analyzed. The results showed that the diffuse reflectance at 540 nm of samples at 10 min after being treated by 0.25%T/SP decreased by approximately 15.51%, whereas, 0.46%, 4.73% and 5.75% were received in C, PEG400 and 0.25%T, respectively. And at 60 min, the decrease in diffuse reflectance of samples in 0.25%T/SP is about 2.22-fold, 1.20-fold compared with that of the samples in PEG 400 and 0.25%T, at 540 nm, respectively. Simultaneously, 0.25%T/SP results in 41.33% increase in OCT 1/e light penetration depth after 60 min. There was a significant difference in the optical clearing effect on skin between ultrasound-mixed solution of thiazone in combination with PEG 400 and the mixed solution (P < 0.05).     

Diamagnetic group 6 tetrakis(di-tert-butylketimido)metal(IV) complexes

The addition of 4 equiv of LiN=C-t-Bu(2) to CrCl(3), MoCl(5), and WCl(6) in diethyl ether produced the complexes M(N=C-t-Bu(2))(4) (M = Cr, Mo, W). Single-crystal X-ray diffraction studies revealed that the molecules have flattened tetrahedral geometries with virtual D(2d) symmetry in the solid state. (1)H and (13)C NMR spectra indicated that the complexes are diamagnetic, and a qualitative MO analysis showed that the orthogonal π-donor and -acceptor orbitals of the ketimide ligand cooperatively split the d(xy) and d(z2) orbitals sufficiently to allow spin pairing in the d(xy) orbital. A more sophisticated quantum-mechanical analysis of Cr(N=C-t-Bu(2))(4) using density functional/molecular mechanics methods confirmed the qualitative analysis by showing that the singlet state is 27 kcal/mol more stable than the triplet state.     

A Simplified Method for the Measurement of Insoluble Solids in Pretreated Biomass Slurries

The biochemical conversion of cellulosic biomass to liquid transportation fuels includes the breakdown of biomass into its soluble, fermentable components. Pretreatment, the initial step in the conversion process, results in heterogeneous slurry comprised of both soluble and insoluble biomass components. For the purpose of tracking the progress of the conversion process, it is important to be able to accurately measure the fraction of insoluble biomass solids in the slurry. The current standard method involves separating the solids from the free liquor and then repeatedly washing the solids to remove the soluble fraction, a laborious and tedious process susceptible to operator variations. In this paper, we propose an alternative method for calculating the fraction of insoluble solids which does not require a washing step. The proposed method involves measuring the dry matter content of the whole slurry as well as the dry matter content in the isolated liquor fraction. We compared the two methods using three different pretreated biomass slurry samples and two oven-drying techniques for determining dry matter content, an important measurement for both methods. We also evaluated a large set of fraction insoluble solids data collected from previously analyzed pretreated samples. The proposed new method provided statistically equivalent results to the standard washing method when an infrared balance was used for determining dry matter content in the controlled measurement experiment. Similarly, in the large historical data set, there was no statistical difference shown between the wash and no-wash methods. The new method is offered as an alternative method for determining the fraction of insoluble solids.     

A Li3V2(PO4)3/C thin film with high rate capability as a cathode material for lithium-ion batteries

A monoclinic lithium vanadium phosphate (Li₃V₂(PO₄)₃) and carbon composite thin film (LVP/C) is prepared via electrostatic spray deposition. The film is studied with X-ray diffraction, scanning and transmission electron microscopy and galvanostatic cell cycling. The LVP/C film is composed of carbon-coated Li₃V₂(PO₄)₃ nanoparticles (50 nm) that are well distributed in a carbon matrix. In the voltage range of 3.0–4.3 V, it exhibits a reversible capacity of 118 mA h g^?1 and good capacity retention at the current rate of 1 C, while delivers 80 mA h g^?1 at 24 C. These results suggest a practical strategy to develop new cathode materials for high power lithium-ion batteries.     

Characterization of SEI layer formed on high performance Si–Cu anode in ionic liquid battery electrolyte

Formation of the SEI layer on Si–Cu film electrode in the ionic liquid electrolyte of 1 M lithium bis(trifluoromethylsulfonyl)imide/1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide (LiTFSI/MPP-TFSI) was investigated using ex-situ ATR FTIR and X-ray photoelectron spectroscopy. The SEI layer is found to be composed of organic and inorganic compounds that are the decomposition products of MPP cation and TFSI anion, and effectively passivate the electrode surface during initial cycling. Formation of a stable SEI layer leads to an excellent capacity retention 98% of the maximum discharge capacity, delivering discharge capacities of > 1620 mAhg^? 1 over 200 cycles. The data contribute to a basic understanding of SEI formation and composition responsible for the cycling performance of Si-based alloy anodes in ionic liquid electrolyte-based rechargeable lithium batteries.     

Synthesis and biological activity of novel phenyltriazolinone derivatives

Phenyltriazolinones are one of the most important classes of herbicides targeting the protoporphyrinogen oxidase enzyme. A series of triazolinone derivatives containing a strobilurin pharmacophore were designed and synthesized with the aim of discovering new phenyltriazolinone analogues with high activity. The herbicidal activity of the synthesized compounds was assayed and some of the test compounds displayed moderate herbicidal activity at 150 g ai/ha.     

Adsorption interaction parameter of polyethers in ternary mobile phases: The critical adsorption line

It is shown that in LC of polymers, the interaction parameter in ternary mobile phases can be described by a plane, which is determined by the dependencies in binary mobile phases. Instead of a critical adsorption point, critical conditions are observed along a straight line of composition between the two critical points in binary mobile phases. Consequently, a separation of block copolymers under critical conditions for one block by an adsorption mechanism for the other block can be achieved in ternary mobile phases of different compositions, which allows an adjustment of the retention of the adsorbing block.