Antiproliferation and Induction of Apoptosis in Ca9-22 Oral Cancer Cells by Ethanolic Extract of <em>Gracilaria tenuistipitata</em>

The water extract of Gracilaria tenuistipitata have been found to be protective against oxidative stress-induced cellular DNA damage, but the biological function of the ethanolic extracts of G. tenuistipitata (EEGT) is still unknown. In this study, the effect of EEGT on oral squamous cell cancer (OSCC) Ca9-22 cell line was examined in terms of the cell proliferation and oxidative stress responses. The cell viability of EEGT-treated OSCC cells was significantly reduced in a dose-response manner (p < 0.0001). The annexin V intensity and pan-caspase activity of EEGT-treated OSCC cells were significantly increased in a dose-response manner (p < 0.05 to 0.0001). EEGT significantly increased the reactive oxygen species (ROS) level (p < 0.0001) and decreased the glutathione (GSH) level (p < 0.01) in a dose-response manner. The mitochondrial membrane potential (MMP) of EEGT-treated OSCC cells was significantly decreased in a dose-response manner (p < 0.005). In conclusion, we have demonstrated that EEGT induced the growth inhibition and apoptosis of OSCC cells, which was accompanied by ROS increase, GSH depletion, caspase activation, and mitochondrial depolarization. Therefore, EEGT may have potent antitumor effect against oral cancer cells.     

Insight into the dinuclear {Fe(NO)2}10{Fe(NO)2}10 and mononuclear {Fe(NO)2}10 dinitrosyliron complexes

The reversible redox transformations [(NO)(2)Fe(S(t)Bu)(2)](-) ? [Fe(μ-S(t)Bu)(NO)(2)](2)(2-) ? [Fe(μ-S(t)Bu)(NO)(2)](2)(-) ? [Fe(μ-S(t)Bu)(NO)(2)](2) and [cation][(NO)(2)Fe(SEt)(2)] ? [cation](2)[(NO)(2)Fe(SEt)(2)] (cation = K(+)-18-crown-6 ether) are demonstrated. The countercation of the {Fe(NO)(2)}(9) dinitrosyliron complexes (DNICs) functions to control the formation of the {Fe(NO)(2)}(10){Fe(NO)(2)}(10) dianionic reduced Roussin's red ester (RRE) [PPN](2)[Fe(μ-SR)(NO)(2)](2) or the {Fe(NO)(2)}(10) dianionic reduced monomeric DNIC [K(+)-18-crown-6 ether](2)[(NO)(2)Fe(SR)(2)] upon reduction of the {Fe(NO)(2)}(9) DNICs [cation][(NO)(2)Fe(SR)(2)] (cation = PPN(+), K(+)-18-crown-6 ether; R = alkyl). The binding preference of ligands [OPh](-)/[SR](-) toward the {Fe(NO)(2)}(10){Fe(NO)(2)}(10) motif of dianionic reduced RRE follows the ligand-displacement series [SR](-) > [OPh](-). Compared to the Fe K-edge preedge energy falling within the range of 7113.6-7113.8 eV for the dinuclear {Fe(NO)(2)}(9){Fe(NO)(2)}(9) DNICs and 7113.4-7113.8 eV for the mononuclear {Fe(NO)(2)}(9) DNICs, the {Fe(NO)(2)}(10) dianionic reduced monomeric DNICs and the {Fe(NO)(2)}(10){Fe(NO)(2)}(10) dianionic reduced RREs containing S/O/N-ligation modes display the characteristic preedge energy 7113.1-7113.3 eV, which may be adopted to probe the formation of the EPR-silent {Fe(NO)(2)}(10)-{Fe(NO)(2)}(10) dianionic reduced RREs and {Fe(NO)(2)}(10) dianionic reduced monomeric DNICs in biology. In addition to the characteristic Fe/S K-edge preedge energy, the IR ν(NO) spectra may also be adopted to characterize and discriminate [(NO)(2)Fe(μ-S(t)Bu)](2) [IR ν(NO) 1809 vw, 1778 s, 1753 s cm(-1) (KBr)], [Fe(μ-S(t)Bu)(NO)(2)](2)(-) [IR ν(NO) 1674 s, 1651 s cm(-1) (KBr)], [Fe(μ-S(t)Bu)(NO)(2)](2)(2-) [IR ν(NO) 1637 m, 1613 s, 1578 s, 1567 s cm(-1) (KBr)], and [K-18-crown-6 ether](2)[(NO)(2)Fe(SEt)(2)] [IR ν(NO) 1604 s, 1560 s cm(-1) (KBr)].     

A Microwave‐assisted Headspace Solid‐phase Microextraction for Rapid Determination of Synthetic Polycyclic and Nitro‐aromatic Musks in Fish Samples

Rapid solvent‐free microwave‐assisted headspace solid‐phase microextraction (MA‐HS‐SPME) coupled with gas chromatography‐mass spectrometry (GC‐MS) was developed to determine synthetic polycyclic and nitro‐aromatic musks in fish samples. Four commonly used synthetic musks, galaxolide (HHCB), tonalide (AHTN), musk xylene (MX) and musk ketone (MK) were employed in the method development and validation. The parameters (microwave irradiation time, irradiation power, amount of water addition, pH value and addition of NaCl) affecting the extraction efficiency of analytes from fish slurry were systematically investigated and optimized. The best extraction conditions were achieved when the fish sample 2‐g mixed with 4‐mL methanol and 15‐mL deionized water (containing 4 g of NaCl, pH 2.0 in a 40‐mL sample‐vial) was microwave irradiated at 80 watt for 5 min. The limits of quantification (LOQ) were 0.4 to 1.2 ng/g in 2‐g of wet tissue. The precision for these analytes, as indicated by relative standard deviations, were less than 9% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction recovery, was between 80 to 92%. A standard addition method was used to quantitate these four synthetic musks, and the total concentrations ranged from 2.1 to 23.1 ng/g in various fish samples.     

The Measurement of the Dispersion of Pd/C Catalysts

A 10 w/o Pd/C catalyst from Johnson Matthey has been examined by three different techniques: chemisorption, line broadening of X-ray diffraction, and TEM (transmission electron microscopy) to investigate the size of the palladium crystallites. The dispersion of this catalyst was determined to be 20%. Among these techniques, the X-ray diffraction was found to be the most convenient method. Through this method, the dispersion of Pd was found to decrease on catalyzing hydroxylamine reactions at 330 K. The deactivation of Pd/C for these reactions was correlated to the sintering of palladium. H₂ chemisorption at 373 K was found to be a good way to accurately measure the number of active palladium sites in the Pd/C catalysts.     

Self‐assembly of Carbon Particles as a Heat Sink Coating to Promote Radiative Cooling

Novel composite carbon particles are developed that can self‐assemble as a coating on a substrate without a binder. These carbon particles were used as a coating to enhance thermal dissipation and their thermal conductivity, surface emissivity and cooling performance were measured. Carbon particles with both thiol and epoxy functional groups self‐assembled to form a coating on the surface of a heat sink without a binder, which greatly improved the thermal conductivity of the coating. Coating a heat sink with the carbon particles yielded a higher thermal conductivity and emissivity than could be obtained with the addition of binder in the conventional approach, and significantly enhanced the cooling performance. In addition, the cooling performance of the carbon nanotube outperformed all other particles when coated on a substrate, because it had the highest thermal conductivity and good radiation emissivity. We developed an equation to describe the various parameters affecting the cooling performance of the thermally dissipative coating. This equation was confirmed by the experimental data.     

Supramolecular functionalization of electron-beam generated nanostructures

Electron-beam lithography was used to pattern poly(styrene-co-(methyldiaminotriazine) styrene) (PS-Triaz). These polymer nanopatterns were utilized as molecular scaffolds for assembling complementary thymine-functionalized CdSe-ZnS quantum dots (Thy-QDs) via three-point hydrogen-bonding molecular recognition. This interaction was very specific, with N-methyl thymine-functionalized QDs (MeThy-QDs) not depositing on the surfaces. The "lock and key" specificity of the assembly is mirrored in the disassembly process, where complete removal of the QD was observed using a competing thymine guest.     

Amperometric morphine sensing using a molecularly imprinted polymer-modified electrode

This study incorporates morphine into a molecularly imprinted polymer (MIP) for the amperometric detection of morphine. The polymer, poly(3,4-ethylenedioxythiophene), PEDOT, is an electroactive film that catalyzes morphine oxidation and lowers the oxidization potential on an indium tin oxide (ITO) electrode. The MIP-PEDOT modified electrode is prepared by electropolymerizing PEDOT onto an ITO electrode in a 0.1 M LiClO₄ solution with template addition (morphine). After template molecule extraction, the oxidizing current of the MIP-PEDOT modified electrode is measured in a 0.1 M KCl solution (pH = 5.3) at 0.75 V (versus Ag/AgCl/sat’d KCl) with the morphine concentration varying in the 0.1-5 mM range. A linear range, displaying the relationship between steady-state currents and morphine concentrations, from 0.1 to 1 mM, is obtained. The proposed amperometric sensor could be used for morphine detection with a sensitivity of 91.86 μA/cm² per mM. A detection limit of 0.2 mM at a signal-to-noise ratio of 3 is achieved. Moreover, the proposed method can discriminate between morphine and its analogs, such as codeine.     

Measurement of the Binding of Adenosylcobalamin to Glutamate Mutase by Fluorescence Spectroscopy

Fluorescence spectroscopy is a fast, highly sensitive technique for investigating protein‐ligand interactions. Intrinsic protein fluorescence is usually occurred by exciting the proteins with 280‐295 nm ultraviolet light, and the light emission is observed approximately between 330‐350 nm. No emission light between 330‐350 nm can be observed when adenosylcobalamin (AdoCbl) is excited at 282 nm. The binding of AdoCbl to glutamate mutase was therefore investigated by fluorescence spectroscopy in this study. Our results show that direct measurement for determining the K_d of AdoCbl by fluorescence spectroscopy leads to significant errors. Here we report the source of error and a corrected method for measuring the binding of coenzyme B₁₂ to glutamate mutase using fluorescence spectroscopy.     

Analyses of preservatives by capillary electrochromatography using methacrylate ester-based monolithic columns

Five common food preservatives were analyzed by capillary electrochromatography, utilizing a methacrylate ester-based monolithic capillary as separation column. In order to optimize the separation of these preservatives, the effects of the pore size of the polymeric stationary phase, the pH and composition of the mobile phase on separation were examined. For all analytes, it was found that an increase in pore size caused a reduction in retention time. However, separation performances were greatly improved in monolithic columns with smaller pore sizes. The pH of the mobile phase had little influence on separation resolution, but a dramatic effect on the amount of sample that was needed to be electrokinetically injected into the monolithic column. In addition, the retention behaviors of these analytes were strongly influenced by the level of acetonitrile in the mobile phase. An optimal separation of the five preservatives was obtained within 7.0 min with a pH 3.0 mobile phase composed of phosphate buffer and acetonitrile 35:65 v/v. Finally, preservatives in real commercial products, including cold syrup, lotion, wine, and soy sauces, were successfully determined by the methacrylate ester-based polymeric monolithic column under this optimized condition.