PHOTOCYCLOADDITION OF 5,7-DIMETHOXYCOUMARIN TO THYMINE

Abstract— C₄-_-Photocycloaddition of 5,7-dimethoxycoumarin (DMC) to thymine (λ≥ 300 nm) was studied in dioxane-water solution, in aqueous frozen state, and solid film state. The major product was isolated and characterized by physical methods. Elemental analysis data, spectral analyses, and photo-splitting of the product indicate the product to be a 1:l C₄-_-cycloadduct of DMC and thymine.     

Engineering of Cardiotoxin by Chemical Synthesis: (I) Rapid Synthesis of Fully Active Cardiotoxin II and IV of Taiwan Cobra Venom

Two 60-residue snake toxins with four disulfide bridges, cardiotoxin II and IV, of Taiwan cobra (Naja naja atra) have been rapidly prepared in overall yields of 3.9% (cardiotoxin II) and 3.7% (cardiotoxin IV) within three weeks using the chemical method. Physicochemical characterization of these synthetic cardiotoxins was carried out by amino acid analysis, mass spectroscopy, capillary electrophoresis, peptide mapping, circular dichroism spectroscopy, and lethal toxicity. As compared with natural cardiotoxins, the results indicated that the synthetic cardiotoxins possessed the same physicochemical properties as those of natural ones. Therefore, in addition to preparation of various important toxins with satisfactory quantities for biochemical and pharmacological studies within a short lime, this rapid method also provides an important route to obtain many interesting toxins and designed toxin analogues for structure/function relationship studies in the near further.     

Photodissociation tandem mass spectrometry at 266 nm of an aliphatic peptide derivatized with phenyl isothiocyanate and 4-sulfophenyl isothiocyanate

Photodissociation (PD) tandem mass spectra have been obtained at 266 nm for the protonated molecules of a tryptic peptide, ASHLGLAR, and of its phenyl isothiocyanate and 4-sulfophenyl isothiocyanate derivatives, generated by matrix-assisted laser desorption/ionization. Derivatization with the aromatic chromophores greatly reduced the intensity of the laser required for efficient PD. Major fragment ions observed in the three spectra are quite similar. General features of the PD tandem mass spectra and their potential utility for analytical purposes are discussed.     

Aging of poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)/toluene solutions and subsequent effects on luminescence behavior of cast films

Morphological effects in luminescence properties of a representative semiconducting polymer, poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), has recently attracted much attention. Previous studies indicated that short-term heat treatment of solution-cast MEH-PPV films may result in the formation of mesomorphic order that is responsible for the "red" emission around 640 nm, in contrast to the single-chromophore "yellow" emission near 590 nm from the disordered matrix. On the basis of microscopic and spectroscopic evidence for films cast from freshly prepared and aged solutions, here we show that prolonged storage of MEHyellowPPV solutions at room temperature or lower may result in retardation of the thermally induced mesophase formation in the subsequently cast films. According to small-angle neutron scattering and differential scanning calorimetric observations over aged MEH-PPV/toluene solutions, we propose that the suppressed transformation into mesomorphic order is due to further development of nanocrystalline aggregates that serve as physical cross-links among MEH-PPV chains in the solution state upon long-term storage. These solvent-induced nanocrystalline aggregates, however, do not exhibit new spectroscopic features beyond the suppression of "red" emission at 640 nm from the mesomorphic phase.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Effect of particle size in preparative reversed-phase high-performance liquid chromatography on the isolation of epigallocatechin gallate from Korean green tea

To isolate epigallocatechin gallate (EGCG) of catechin compounds from Korean green tea (Bosung, Chonnam), a C18 reversed-phase preparative column (250x22 mm) packed with packings of three different sizes (15, 40-63, and 150 microm) was used. The sample extracted with water was partitioned with chloroform and ethyl acetate to remove the impurities including caffeine. The mobile phases in this experiment were composed of 0.1% acetic acid in water, acetonitrile, methanol and ethyl acetate. The injection volume was fixed at 400 microl and the flow rate was increased as the particle size becomes larger. The isolation of EGCG with particle size was compared at a preparative scale and the feasibility of separation of EGCG at larger particle sizes was confirmed. The optimum mobile phase composition for separating EGCG was experimentally obtained at the particle sizes of 15 and 40-63 microm in the isocratic mode, but EGCG was not purely separated at the particle size of 150 microm.     

Determination of buprenorphine by high-performance liquid chromatography with fluorescence detection: application to human and rabbit pharmacokinetic studies.

A rapid, sensitive, precise and accurate high-performance liquid chromatographic assay with fluorescence detection was developed for the determination of buprenorphine in human, rabbit, pig and dog plasma. It is comprised of only a one-step extraction procedure with hexane-isoamyl alcohol at pH 9.25 and reversed-phase chromatography on a muPorasil column. The recoveries of buprenorphine and nalbuphine (internal standard) were greater than 90%. Calibration graphs were linear over the concentration range 3-300 ng/ml with a coefficient of variation, both within-day and between-day, of less than 9% at any level. The limit of detection was 1.0 ng/ml of plasma based on a signal-to-noise ratio of 3. Eight other clinically used narcotics were investigated to check for potential interferences and their analytical conditions. The possible decomposed compounds of buprenorphine were also checked for the specificity of this assay. The method has been successfully applied to the stability and pharmacokinetic studies of buprenorphine. Buprenorphine in plasma did not decompose significantly at -20 degrees C for four weeks. Pharmacokinetic application in six rabbits and a surgical patient revealed that buprenorphine followed a linear three-compartment model with two distribution phases. The two distribution and elimination half-lives and the clearance of buprenorphine were 1.32, 24.8 and 230 min and 224 ml/min in human plasma, and 0.94, 12.5 and 232 min and 30 ml/min in rabbit plasma.     

Pretreatment of swine wastewater using anaerobic filter

Efforts were made to assess the efficiency of an anaerobic filter packed with porous floating ceramic media and to identify the optimum operational condition of anaerobic filter as a pretreatment of swine wastewater for the subsequent biological removal of nitrogen and phosphorus. A stepwise decrease in hydraulic retention time (HRT) and an increase in organic loading rate (OLR) were utilized in an anaerobic filter reactor at mesophilic temperature (35°C). The optimum operating condition of the anaerobic filter was found to be at an HRT of 1 d. A soluble chemical oxygen demand (COD) removal efficiency of 62% and a total suspended solids removal efficiency of 39% at an HRT of 1 d were achieved with an OLR of 16.0 kg total COD/(m³·d), respectively. The maximum methane production rate approached 1.70 vol of biogas produced per volume of reactor per day at an HRT of 1 d. It was likely that the effluent COD/total Kjeldahl nitrogen ratio, of 22, the COD/total phosphorous ratio of 47, and the high effluent alkalinity >2500 mg/L as CaCO₃ of the anaerobic filter operated at an HRT of 1 d was adequate for the subsequent biological removal of nitrogen and phosphorus.     

Extraction of phenolic compounds and organic acids by liquid membranes

Liquid membrane emulsions were used to extract phenolic compounds and organic acids from their aqueous solutions. The emulsions contained caustic as the reactive agent. When the phenolic compounds and organic acids permeated through the liquid membranes into the emulsion droplets, they reacted with caustic and became ionized. The ionized species could not permeate through the liquid membranes and therefore were held in the emulsion droplets.

The conclusions of this recent investigation are:

(1) More than 99% of phenol and cresols can be extracted in less than 1 minute.

(2) Acetic and propionic acids can also be extracted but at much slower rates. However, if the amount of caustic is not sufficient to react with all the permeating compounds, the acids will be extracted preferentially to the phenols.

(3) The acids can only be extracted at low pH (acidic) whereas the phenolic compounds can be extracted at pH of 7.

(4) The extraction rates for phenol and acetic acid are the same in individual-compound and binary-mixture permeations.

(5) The extraction can be described by a mass transfer model.     

Simple mimetics of a nuclear localization signal (NLS)

[reaction: see text] Molecular modeling was used to design mimetics of the HIV-1 matrix protein nuclear localization signal (NLS) in which a scaffold of two resorcinol units joined by a diamide linker presents 3-aminopropyl ethers in place of lysine side chains. Prospective mimetics with linkers of 6, 8, 10, or 12 atoms were synthesized and compared in a competition assay for binding to the nuclear import receptor subunit karyopherin alpha, showing the 10-atom linker to be best and shorter ones ineffective.