Highly Luminescent Red Phosphorescent OLED with Interfacial Layers for Hole Transport and Electron Injection

Four kinds of red phosphorescent organic light-emitting devices were fabricated and compared to investigate the effect of interfacial layers for hole transport and electron injection. 1 nm-thick LiF in the device A and C and 1 nm-thick Cs₂CO₃ in the device B and D were deposited as an electron injection layer between the anode and the electron transport layer, and 5 nm-thick layer of dipyrazion[2,3-f:2′,2′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile[HATCN] was inserted as a hole transport interfacial layer between the hole injection layer and the hole transport layer only in the device C and D. Under a luminance of 1000 cd/m², the power efficiencies were 7.6 lm/W and 8.5 lm/W in the device A and B, and 8.6 lm/W and 13.4 lm/W in the device C and D. The quantum efficiency of the device D was 15.8% under 1000 cd/m² which was somewhat lower than those of the device A and C, but a little higher than that of the device B. The luminance of the device D was much higher than those of the other devices at a given votage. The luminance of the device D at 7 V was 23,710 cd/m², which was 13.0, 3.4, and 4.0 times higher than those of the device A, B, and C at the same voltage, respectively.     

Step annealing effects on the structural and optical properties of InAs quantum dots grown on GaAs

The effects of multi-step rapid thermal annealing (RTA) for the self-assembled InAs quantum dots (QDs), which were grown by a molecular beam epitaxy (MBE), were investigated through photoluminescence (PL) and transmission electron microscopy (TEM). Postgrowth multi-step RTA was used to modify the structural and optical properties of the self-assembled InAs QDs. Postgrowth multi-step RTAs are as follows: one step (20 s at 750 °C); two step (20 s at 650 °C, 20 s at 750 °C); three step (30 s at 450 °C, 20 s at 650 °C, 20 s at 750 °C). It is found that significant narrowing of the luminescence linewidth (from 132 to 31 meV) from the InAs QDs occurs together with about 150 meV blueshift by two-step annealing, compared to as-grown InAs QDs. Observation of transmission electron microscopy (TEM) shows the existence of the dots under one- and two-step annealing but the disappearance of the dots by three-step annealing. Comparing with the samples under only one-step annealing, we demonstrate a significant enhancement of the interdiffusion in the dot layer under multi-step annealing.     

化学模式识别技术评价中药厚朴质量的研究

本文对不同产地和市售的二十四种厚朴药材及饮片的萃取液进行了高效液相色谱、气相色谱及紫外光谱分析;对所得数据用主成分分析进行分类,概括出不同样品化学成分的异同,认为大叶木兰可做为厚朴的代用品,而在陕西安康购得的样品不应做厚朴使用,后者经生药学鉴定为厚朴伪品凹叶木兰。化学模式识别技术可为寻找药材的代用品、评价中药质量及鉴定伪劣药材提供依据。     

Investigations on the location and construction of a low background gamma-spectrometer

The underground radiation conditions in the mining district of Freiberg and in a rock salt environment of the Werra district were investigated. In a salt mine a very low natural activity level can be found. For selection of proper shielding materials a low-level -spectrometer and an optimum sample geometry must be used. The photopeak differences between sample and blank are small in most cases. Considerable differences can be found in the continuous background below 0.7 MeV.     

Mechanism on oscillating lifted flames in nonpremixed laminar coflow jets

The oscillating lifted flame in a laminar nonpremixed nitrogen-diluted fuel jet is known to be a result of buoyancy, though the detailed physical mechanism of the initiation has not yet been properly addressed. We designed a systematic experiment to test the hypothesis that the oscillation is driven by competition between the positive buoyancy of flame and the negative buoyancy of a fuel stream heavier than the ambient air. The positive buoyancy was examined with various flame temperatures by changing fuel mole fraction, and the negative buoyancy was investigated with various fuel densities. The density of the coflow was also varied within a certain range by adding either helium or carbon dioxide to air, to study how it affected the positive and negative buoyancies at the same time. As a result, we found that the range of oscillation was well-correlated with the positive and the negative buoyancies; the former stabilized the oscillation while the latter triggered instability and became a source of the oscillation. Further measurements of the flow fields and OH radicals evidenced the important role of the negative buoyancy on the oscillation, detailing a periodic variation in the unburned flow velocity that affected the displacement of the flame.     

Finite-/fixed-time robust stabilization of switched discontinuous systems with disturbances

Nonlinear Dynamics - This paper investigates the finite-time and fixed-time stabilization (FFTS) of switched systems with discontinuous dynamics, external disturbances and delays. Firstly, a new...