Radiation-induced polymerization of cyclohexene sulfide in the solid state

Radiation-induced solid-state polymerization of cyclohexene sulfide has been investigated. Differential thermal analysis shows that this compound has a phase transition point at ?74°C and behaves as a plastic crystal in the temperature range from ?74 to ?20°C (melting point). By rapid cooling, this plastic crystal was easily supercooled, and below ?166°C a glassy crystal, i.e., a supercooled nonequilibrium state of plastic crystal, was obtained. In-source polymerization proceeded in the plastic crystalline state. Postpolymerization of glassy crystalline monomer irradiated at ?196°C occurred above ?166°C (glass transition point) during subsequent heating.     

Self-aggregation of synthetic zinc oxo-bacteriochlorins bearing substituents characteristic of chlorosomal chlorophylls

We prepared novel zinc 8-ethyl-8-methyl-7-oxo- and 7-ethyl-7-methyl-8-oxo-bacteriochlorins 1 and 2 possessing substituents characteristic of chlorosomal chlorophylls, exclusively observed in extramembraneous light-harvesting antennas of photosynthetic green bacteria. The electronic absorption spectra of monomeric 1 and 2 in THF were obviously different: the Q(y) maximum of the former was 724 and that of the latter was 683 nm. This observed spectral difference was clearly explained by theoretical ZINDO/S calculation of their energetically minimized molecules. The optical properties of monomeric 1/2 were controlled by the electronic effect of the 7/8-oxo groups. Specific spectral changes in the electronic, CD, and FT-IR absorption spectra by dilution of the monomeric THF solutions of 1/2 with a 100/200-fold volume of cyclohexane showed the formation of chlorosomal self-aggregation species constructed by 13-C=O...H-O(3(1))...Zn and pi-pi stacking. Especially, the red-shift values in the Q(y) band of 1/2 by self-aggregation were 2450/1970 cm(-1), indicating that exciton interaction among the composite molecules in the self-aggregation of 1 was stronger than in those of 2. Molecular model calculations for dodecamers of 1/2 based on a parallel chain arrangement gave partially different supramolecular structures; the specific hydrogen-bonding distances in 2-dodecamer were larger than those of 1-dodecamer, while both coordinations gave the same Zn-O distance. These modeling results showed that 1 was more tightly packed in the self-aggregates to give a larger red-shift value in the Q(y) band by self-aggregation than 2. The difference in the supramolecular structures is mainly ascribable to the steric effect of 8/7-dialkyl groups in self-aggregates of 1/2.     

Asymmetric synthesis of 2-substituted-3-aminocarbonyl propionic acid

An asymmetric synthetic route to 2-substituted-3-aminocarbonyl propionic acid, which is the significant component of low-molecular-weight renin inhibitors, is described. The key step of this synthesis is diastereoselective alkylation by using chiral oxazolidinone and benzyl bromoacetate.     

A new series of antiallergic agents. I. Synthesis and activity of 11-(2-aminoethyl)thio-6,11-dihydrodibenz[b,e]oxepin derivatives.

A new series of 11-substituted 6,11-dihydrodibenz[b,e]oxepin derivatives was synthesized and evaluated for antiallergic activity. Convenient methods for the preparation of sulfides from alcohols were developed. Structure-activity relationships are described. Compound 7, 11-[2-(dimethylamin)ethyl]thio-6,11-dihydrodibenz[b,e] oxepin-2-carboxylic acid hydrochloride, was the most potent in the rat passive cutaneous anaphylaxis test (ED50 = 0.92 mg/kg p.o.). It had a potent inhibitory effect on anaphylactic bronchoconstriction in guinea pigs (ED50 = 0.029 mg/kg p.o.) and H1 receptor antagonistic effect (Ki = 14 nM) with few central nervous system side effects. Additionally, an antagonistic effect against prostaglandin D2-induced contraction of isolated guinea pig trachea (pA2 = 5.73) was an attractive mechanism of action of the new antiallergic agent. Compound 7 was selected for further evaluation as KW-4994.     

Ruthenium(II)-catalyzed hydrogenation of carbon dioxide to formic acid. Theoretical study of real catalyst, ligand effects, and solvation effects

Ruthenium-catalyzed hydrogenation of carbon dioxide to formic acid was theoretically investigated with DFT and MP4(SDQ) methods, where a real catalyst, cis-Ru(H)2(PMe3)3, was employed in calculations and compared with a model catalyst, cis-Ru(H)2(PH3)3. Significant differences between the real and model systems are observed in CO2 insertion into the Ru(II)-H bond, isomerization of a ruthenium(II) eta1-formate intermediate, and metathesis of the eta1-formate intermediate with a dihydrogen molecule. All these reactions more easily occur in the real system than in the model system. The differences are interpreted in terms that PMe3 is more donating than PH3 and the trans-influence of PMe3 is stronger than that of PH3. The rate-determining step is the CO2 insertion into the Ru(II)-H bond. Its deltaG(o++) value is 16.8 (6.8) kcal/mol, where the value without parentheses is calculated with the MP4(SDQ) method and that in parentheses is calculated with the DFT method. Because this insertion is considerably endothermic, the coordination of the dihydrogen molecule with the ruthenium(II)-eta1-formate intermediate must necessarily occur to suppress the deinsertion. This means that the reaction rate increases with increase in the pressure of dihydrogen molecule, which is consistent with the experimental results. Solvent effects were investigated with the DPCM method. The activation barrier and reaction energy of the CO2 insertion reaction moderately decrease in the order gas phase > n-heptane > THF, while the activation barrier of the metathesis considerably increases in the order gas phase < n-heptane < THF. Thus, a polar solvent should be used because the insertion reaction is the rate-determining step.     

Novel type of heterogenized CuCl2 catalytic systems for oxidative carbonylation of methanol

A novel type of heterogenized CuCl₂ catalysts was designed for the oxidative carbonylation of methanol to dimethyl carbonate (DMC) taking account of the plausible reaction mechanism and intermediates. To prevent severe corrosion of the reaction equipment materials due to Cl^– while keeping the catalytic activity of the homogeneous CuCl₂ catalyst, we adopted, as supports (or ligands) of CuCl₂, four polymers, bearing a 2,2-bipyridine (bpy) or pyridine (py) unit, namely, poly(2,2-bipyridine-5,5-diyl) (Pbpy), poly(pyridine-2,5-diyl) (Ppy), poly(N,N-bisphenylene-2,2-bipyridine-4,4-dicarboxylic amide) (Bpya), and poly(4-methyl-4-vinyl-2,2-bipyridine) (Pvbpy), together with one chelate compound, 8-quinolinol. The catalytic activity, stability of heterogenized CuCl₂ and their corrosivities to stainless steels were examined in the liquid-phase reaction of the oxidative carbonylation of methanol. These polymer-supported catalysts showed considerable catalytic activity and stability for the DMC synthesis. In particular, the Pbpy-CuCl₂ and Ppy-CuCl₂ catalysts exhibited high DMC yields and selectivity comparable to those of the homogeneous CuCl₂ catalyst. This high activity appears to be associated with the presence of the -conjugated system in the polymers, which affect the redox reactions of Cu involved in the catalytic reaction. All of the polymer-supported CuCl₂ catalysts could be easily recycled after filtration, and the initial catalytic activity was maintained after three times of use. The corrosive characters of the catalysts were closely related to CuCl₂ leaching from the supports, which reflects the ability of supports to coordinate Cu. These experimental results suggest that both the electronic structure and the coordination ability of the polymer supports are key factors for the development of an effective catalytic system.     

Matrix IR spectra and normal coordinate analysis for methanesulfenyl chloride and isotopic analogs

The IR spectra (4000-250 cm⁻¹) of CH₃SCl and CD₃SCl in solid argon have been obtained. Fundamental vibrations, except the torsional vibrations, have been assigned. Normal coordinate analysis has been carried out omitting the torsional modes.     

Simultaneous assay of four stereoisomers of diltiazem hydrochloride. Application to in vitro chiral inversion studies

Summary The simultaneous stereospecific assay of four stereoisomers of diltiazem hydrochloride in bulk drug and aqueous solution was developed using HPLC on a Chiralcel OF column. The four isomers were quantitated with good precision by the internal standard method. The chiral inversion of (+)-cis-diltiazem hydrochloride in vitro, stability of its (2S, 3S) configuration in the solid and aqueous states was examined by HPLC. Chiral inversion of (+)-cis-diltiazem hydrochloride was not observed in the solid state, and its (2S, 3S) configuration was stable to heat, humidity and light. Chiral inversion of (+)-cis-diltiazem hydrochloride (2S, 3S) was observed in aqueous solution under UV, but not in aqueous solution stored at 80°C for 5h nor under visible light for 10 h. The (+)-cis-diltiazem hydrochloride (2S, 3S) epimerized to (+)-trans-diltiazem hydrochloride (2R, 3S) with a half-life of 5h in aqueous solution under UV but the reverse chiral inversion of (+)-trans-diltiazem hydrochloride (2R, 3S) to (+)-cis-diltiazem hydrochloride (2S, 3S) was not observed.