Vanadium-binding protein in a vanadium-rich ascidian Ascidia sydneiensissamea: CW and pulsed EPR studies

Some of the ascidians belonging to the suborder Phlebobranchia accumulate vanadium ion efficiently from seawater. Clarification of the mechanism of this surprisingly efficient metal-accumulation system is desirable. Two mutually similar vanadium-binding proteins (vanabin1 and vanabin2) have recently been isolated from a vanadium-rich ascidian Ascidia sydneiensis samea. In this study, the vanadium-binding properties of vanabin2 have been investigated by X-band CW EPR and pulsed EPR spectroscopy. CW EPR spectra of samples containing various ratios of VO2+ and vanabin2 invariably exhibited a usual mononuclear-type VO2+ EPR signal with the intensity dependent on the ratio [vanabin]/[V]. EPR titration has shown that vanabin2 can bind up to approximately 23.9 vanadium ions per one molecule, almost all of which ( approximately 84%) are in a mononuclear VO2+ state as estimated by EPR quantitation. Electron spin-echo envelope modulation (ESEEM) spectra of VO-vanabin2 exhibited reasonably intense peaks attributable to amine nitrogen. This is consistent with the fact that vanabin2 is a lysine-rich protein (14 lysines out of 91 amino acids). The present study reveals the uniqueness of vanabin2, which can bind a large number of metal ions in a mononuclear fashion in contrast to the situation for ferritin and metallothionein.     

Encapsulation of doxorubicin into liposomes by a freeze-thawing method using buffer solution

When doxorubicin was encapsulated into liposomes by freeze-thawing, the percentage of encapsulated doxorubicin (EN%) was found to vary according to the type of buffer solution used. The reason for this was investigated in the present report. Drug-free liposomes prepared by hydration were mixed with doxorubicin dissolved in a certain type of buffer solution that shows a pH decrease on freezing, and this mixture was subjected to freeze-thawing. Doxorubicin was encapsulated by the liposomes due to the difference in pH between freezing and thawing. EN% depended on the pH of the buffer solution before freezing and increased significantly at over pH 7. About 60% of doxorubicin was encapsulated into liposomes after the Ist freeze-thawing cycle, and EN% was increased gradually with the number of freeze-thawing cycles. The addition of sugar to the experimental system was seen to affect doxorubicin encapsulation and the particle size of liposomes.     

Determination of trace amounts of vanadium in air samples with 2-(8-quinolylazo)-5-N,N-diethylaminophenol by reversed-phase liquid chromatography

A reversed-phase liquid chromatographic method for the determination of trace amounts of vanadium is described. Metal ions are converted into 2-(8-quinolylazo)-5-N,N-diethylaminophenol chelates in an off-line system. The chelates are injected onto a Zorbax CN column and separated with an aqueous acetonitrile mobile phase containing no chromogenic reagent. Unter these conditions, only vanadium(V) is spectrophotometrically detected at 540 nm among the metal ions Al(III), Ba(II), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Ga(III), Hg(II), Mg(II), Mn(II), Ni(II), Pb(II), V(V) and Zn(II). Amounts of 8.0–200 pg of vanadium(V) in 100-μl injections can be determined without interference from 10-fold molar excesses of many cations. At 0.001 a.u.f.s., the detection limit (twice the peak-to-peak noise) for vanadium(V) is 8.0 pg in 100 μl of injected solution and the relative standard deviation at 120 pg of vanadium(V) in a 100-μl injection is 3.5%. The proposed method is applied to the determination of vanadium in rain water and airborne particulates.     

Metal-complex assemblies constructed from the flexible hinge-like ligand H2bhnq: structural versatility and dynamic behavior in the solid state

Novel metal-complex assemblies constructed from the flexible hinge-like ligand H(2)bhnq (H(2)bhnq=2,2'-bi(3-hydroxy-1,4-naphthoquinone)) have been synthesized. The X-ray crystal structures of these compounds reveal that four types of architectures are accessible by variation of the metal ions. In copper(II) compounds 1-3, the chelating bhnq(2-) ions bridge copper(II) centers to form one-dimensional zigzag chains. The chains of 1-3 are arranged by hydrogen-bonding interactions and stacking interactions to produce porous structures. Cobalt(II) and zinc(II) compounds 4 and 5 form one-dimensional helical chains. In 4 and 5, the crystal packing induces spontaneous resolution of the helical chains with chiral cavities formed perpendicular to the helices. Nickel(II) compounds 6 and 7 form cyclic tetramers. The fourth architecture, a dimer (compound 8), is obtained by the reaction of zinc(II) and bhnq(2-) in MeOH. In these compounds, changes of the dihedral angles and the metal-coordination mode of the bhnq(2-) ion induce the structural versatility. The assemblies of the zigzag chains of the copper(II) compounds exhibit reversible vapochromic behavior. UV/Vis, powder X-ray diffraction, EPR, and adsorption isotherm measurements indicate that this vapochromic behavior is based on the hinge-like flexibility of the bhnq(2-) ion.     

Novel efficient preparative method for phthalocyanines from phthalimides and phthalic anhydride with HMDS

A convenient synthesis of peripherally substituted or unsubstituted phthalocyanines having a variety of metals is described. Phthalocyanines can be obtained by heating phthalimides or phthalic anhydride with metal salts, hexamethyldisilazane, a catalytic amount of p-TsOH, and DMF at 150 degrees C.     

Magnetic/Conducting Hybrid Compound Composed of 1-D Chain [Mn2Cl5(EtOH)]∞ and BEDT-TTF Stacking Layer

An assembled compound (BEDT-TTF)₂[Mn₂Cl₅(EtOH)] (1) consisting of two structural lattices of Mn(II)-Cl one-dimensional (1-D) chains and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) stacking layers was synthesized by electrochemical crystallization. Compound 1 crystallized in triclinic space group P-1 (#2) with a=13.1628(5) Å, b=20.3985(9) Å, c=7.4966(3) Å, α=98.3498(8)°, β=104.980(1)°, γ=74.602(2)°, V=1868.3(1) ų, and Z=2. The 1-D chains and the stacking layers are aligned along the c-axis of the unit cell. The 1-D chain is described as [Mn₂Cl₅(EtOH)]_∞⁻ in which two Mn(II) ions and four Cl⁻ ions form a ladder-like chain with Kagomé (cuboidal) sublattices, and the remaining Cl⁻ ion and an ethanol molecule cap the edge-positioned Mn(II) ions of the chains. The BEDT-TTF molecules are packed between the Mn-Cl chains (ac-plane), the intermolecular S·S contacts of which are approximately found in the range 3.440(2)-3.599(2) Å. The packing feature of BEDT-TTF molecules is very similar to that of (BEDT-TTF)₂ClO₄(TCE)_0.5 (TCE=1,1,2-trichloroethane) (J. Am. Chem. Soc., 105, 297 (1983)). Regarding the electronic state of each BEDT-TTF molecule, Raman spectroscopic analysis and ESR study revealed the presence of half-valence BEDT-TTF molecules (charge delocalization) in 1. Magnetic measurements clearly demonstrated that the paramagnetic spins on the 1-D chain [Mn₂Cl₅(EtOH)]_∞⁻ arrange antiferromagnetically in the low-temperature region. Additionally, 1 exhibits metallic conductivity in the temperature range 2.0-300 K (σ=21 S cm⁻¹ at 300 K and 1719 S cm⁻¹ at 2.0 K), due to the contribution of the stacked BEDT-TTFs. Consequently, these peculiarities that correspond to antiferromagnetic/metallic conductivity demonstrate the “bi-functionality” of 1.     

Room-temperature phosphorimetric determination of biogenic indole compounds adsorbed on a thin-layer chromatographic plate

A simple and sensitive method is described for the determination of biogenic indole compounds adsorbed on cellulose or alumina plates for thin-layer chromatography by room-temperature phosphorimetry. The optimum conditions were investigated for 5-hydroxyindole-3-acetic acid and indole-3-acetic acid. The compounds are spotted on the plates, which are then sprayed successively with sodium citrate or sodium acetate, and sodiu iodide solutions. The plates are dried completely under a stream of dry nitrogen, and immediately dipped in molten paraffin. The phosphorescence is stable for at least 3 h even in moist air. The limits of detection for nine biogenic indole compounds tested are between 2 and 300 pmol per sample spot.     

Enantioselective Synthesis of 3,4‐Dihydropyran‐2‐ones by Domino Michael Addition and Lactonization with New Asymmetric Organocatalysts: Cinchona‐Alkaloid‐Derived Chiral Quaternary Ammonium Phenoxides

Chiral quaternary ammonium phenoxides were readily prepared from commercially available cinchona alkaloids and proved to be useful new asymmetric organocatalysts. Among various chiral quaternary ammonium phenoxides, a cinchonidine‐derived catalyst that bears both a sterically hindered N1‐9‐anthracenylmethyl group and a strongly electron withdrawing 9‐O‐3,5‐bis(trifluoromethyl)benzyl group were found to be highly effective for the Michael addition of ketene silyl acetals (derived from phenyl carboxylates) and α,β‐unsaturated ketones followed by lactonization. Optically active 3,4‐dihydropyran‐2‐one derivatives were obtained in high yields with excellent control of enantio‐ and diastereoselectivity. This catalyst can be handled in air and stored at room temperature in a sealed bottle without decomposition for at least one month.     

Kinetic and ESR studies on the radical polymerization of Di-n-butyl itaconate in benzene

The polymerization of di-n-butyl itaconate (DBI) intiated with AIBN was kinetically investigated in benezene. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.5[DBI]^1.7. The polymerization showed a considerably low overall activation energy of 15.3 kcal/mol. The initiator efficiency of AIBN in this system decreased with increasing DBI concentration, ranging from 0.34 to 0.55°C, which is ascribable to viscosity effect due to the monomer. From an ESR study, the polymerization system was found to involve two kinds of persistent radicals, namely, primary propagating ( III ) and propagating ( I ) radicals. The relative concentration of III to I increased with decreasing monomer concentration. Azo-nitrile initiators such as AVN and ACN similarly produced two persistent radicals, while MAIB, DBPO, and PBO yielded only propagating radical I as persistent. The MAIB-initiated polymerization of DBI was also performed in benzene. Similar kinetic features were observed, that is, a higher dependence of R_p on the DBI concentration and a low overall activation energy (14.4 kcal/mol). The following rate equation was obtained at 50°C:R_p = k[MAIB]^0.5[DBI]^1.6. The initiator efficiency of MAIB decreased with increasing DBI concentration, ranging from 0.32 to 0.53 at 50°C. The concentration of propagating radical I was determined by ESR at 50 and 61°C, from which k_p and k_t were estimated. The k_p value increased with increasing monomer concentration, while the k_t one decreased with the DBI concentration. These values are much lower compared with those of MMA.     

Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.