Molecular interactions between lipid bilayers and a water-soluble polymer

Molecular interactions between lipid bilayers (liposomes) and chondroitin sulfate C (CS), a water soluble polymer, have been investigated in terms of zeta-potential, particle size, microscopic-viscosity, microscopic-polarity of liposomes and permeability of calcein. Microscopic morphology is dramatically changed by the addition of CS to the positively charged liposomes (Pos.L), while it is not changed by the addition to uncharged liposomes (Unc.L) or negatively charged liposomes (Neg.L). The absolute value of the particle size of Pos.L increases with the addition of CS, while the zeta- potential of Pos.L decreases. Permeability of Pos.L decreases with an increase in the concentration of CS. Phase transition temperature of Pos.L is changed after the addition of CS. These values, however, are not changed for the other liposomes by the addition of CS. The results of gel filtration chromatography show that CS is absorbed on the Pos.L surface. Microscopic viscosity is also increased by the addition of CS to Pos.L due to the adsorption of CS.     

Development of a new software for the X-ray structural analysis of polymer crystals by utilizing the X-ray imaging plate system

A software and some useful tools have been developed for identifying individual x-ray reflectional peaks recorded with an x-ray imaging plate system. These techniques were applied to analyze the crystal structure of uniaxially oriented polymer samples. Characteristic features of the present method may be summarized as follows. (1) The indexing of the observed reflections and the determination of the unit cell parameters can be made easily on the display of the computer. (2) The integrated intensity of the individual component of the overlapped reflections can be evaluated quantitatively through the curve separation technique. The R_merge's for the equivalent reflections were 5–6%, indicating the exact evaluation of the integrated intensities. (3) The thus obtained reflectional data were successfully utilized for the extraction of the initial structural models by the direct method. The actual applications have been made for orthorhombic polyethylene, trigonal polyoxymethylene, and isotactic polybutene-1, giving the refined crystal structures including even the positions of hydrogen atoms in some cases. The reliability factors were 12, 5, and 15%, respectively, for these three polymer cyrstals. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1677–1700, 1997     

Biodegradation of chitin with enzymes and vital components

Chitin from squid pen was effectively degraded by the chitinase from Bacillus sp. PI-7S, while the degradation of chitin with lysozyme proceeded very slowly. Among the various vital components studied, the degradation of chitin from squid pen was performed not by canine serum, canine tela subcutanea, canine tela liver, and equine serum but by bovine serum and caprine serum. Noteworthy is the fact that chitin sponge subcutaneously implanted in dog reported not to have chitinase was degraded in ca. 14 days.     

Vanadium-binding protein in a vanadium-rich ascidian Ascidia sydneiensissamea: CW and pulsed EPR studies

Some of the ascidians belonging to the suborder Phlebobranchia accumulate vanadium ion efficiently from seawater. Clarification of the mechanism of this surprisingly efficient metal-accumulation system is desirable. Two mutually similar vanadium-binding proteins (vanabin1 and vanabin2) have recently been isolated from a vanadium-rich ascidian Ascidia sydneiensis samea. In this study, the vanadium-binding properties of vanabin2 have been investigated by X-band CW EPR and pulsed EPR spectroscopy. CW EPR spectra of samples containing various ratios of VO2+ and vanabin2 invariably exhibited a usual mononuclear-type VO2+ EPR signal with the intensity dependent on the ratio [vanabin]/[V]. EPR titration has shown that vanabin2 can bind up to approximately 23.9 vanadium ions per one molecule, almost all of which ( approximately 84%) are in a mononuclear VO2+ state as estimated by EPR quantitation. Electron spin-echo envelope modulation (ESEEM) spectra of VO-vanabin2 exhibited reasonably intense peaks attributable to amine nitrogen. This is consistent with the fact that vanabin2 is a lysine-rich protein (14 lysines out of 91 amino acids). The present study reveals the uniqueness of vanabin2, which can bind a large number of metal ions in a mononuclear fashion in contrast to the situation for ferritin and metallothionein.     

Observation and analysis of single DNA nano-kinetics by pin-fiber video scope

The nano-kinetic movement of a single DNA molecule was observed and analyzed by a newly developed video-microscope system with an optical fiber, called a pin-fiber video scope. A single lambda-DNA molecule was put in focus using fiber-illumination, and the stretching and shrinking motion was measured. The molecule's kinetics were analyzed by numerical calculations and are discussed. A photocleavage phenomenon of DNA molecules was also visualized by the pin-fiber video scope. The new video-microscope system has the potential to observe and analyze the nano-kinetics of a single molecule.     

Efficient excitation energy transfer in long meso-meso linked Zn(II) porphyrin arrays bearing a 5,15-bisphenylethynylated Zn(II) porphyrin acceptor

Electronically coupled porphyrin arrays are suitable for artificial light harvesting antenna in light of a large absorption cross-section and fast excitation energy transfer (EET). Along this line, an artificial energy transfer model system has been synthesized, comprising of an energy donating meso-meso linked Zn(II) porphyrin array and an energy accepting 5,15-bisphenylethynylated Zn(II) porphyrin linked via a 1,4-phenylene spacer. This includes an increasing number of porphyrins in the meso-meso linked Zn(II) porphyrin array, 1, 2, 3, 6, 12, and 24 (Z1A, Z2A, Z3A, Z6A, Z12A, and Z24A). The intramolecular singlet-singlet EET processes have been examined by means of the steady-state and time-resolved spectroscopic techniques. The steady-state fluorescence comes only from the acceptor moiety in Z1A-Z12A, indicating nearly the quantitative EET. In Z24A that has a molecular length of ca. 217 A, the fluorescence comes largely from the acceptor moiety but partly from the long donor array, indicating that the intramolecular EET is not quantitative. The transient absorption spectroscopy has provided the EET rates in real time scale: (2.5 ps)(-1) for Z1A, (3.3 ps)(-1) for Z2A, (5.5 ps)(-1) for Z3A, (21 ps)(-1) for Z6A, (63 ps)(-1) for Z12A, and (108 ps)(-1) for Z24A. These results have been well explained by a revised F?rster equation (Sumi formula), which takes into account an exciton extending coherently over several porphyrin pigments in the donor array, whose length is not much shorter than the average donor-acceptor distance. Advantages of such strongly coupled porphyrin arrays in light harvesting and transmission are emphasized in terms of fast EET and a large absorption cross-section for incident light.     

Scandium(III) trifluoromethanesulfonate catalyzed aromatic nitration with inorganic nitrates and acetic anhydride

The rare earth metal(III) trifluoromethanesulfonate (rare earth metal(III) triflate, RE(OTf)3) was found to be an efficient catalyst for aromatic nitration with carboxylic anhydride-inorganic nitrate as the nitrating agent. In the presence of a catalytic amount of RE(OTf)3, the nitration of substituted benzenes proceeded to afford the corresponding nitrobenzenes. Especially, scandium(III) trifluoromethanesulfonate (scandium(III) triflate, Sc(OTf)3) is the most active catalyst among our tested Lewis acids. It was also found that acetic anhydride-Al(NO3).9H2O is the most active nitrating agent in this system.     

Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight

Random copolymers with high molecular weights of indene and p‐methylstyrene (pMeSt) were synthesized by cationic polymerization with trichloroacetic acid/tin tetrachloride in CH₂Cl₂ at low temperatures. When indene and pMeSt (1:1 v/v), for example, were polymerized at ?40 °C, both monomers were consumed at very similar rates to give a copolymer with high molecular weight [number‐average molecular weight (M_n): 8–9 × 10⁴]. This is indeed quite unexpected behavior for the combination of these two monomers because pMeSt polymerized over 1000 times faster than indene in the homopolymerization under the reaction conditions previously described. The product copolymer of indene and pMeSt had a random monomer sequence in it that was confirmed by NMR analyses and thermal‐property measurements. In sharp contrast with pMeSt, styrene and p‐chlorostyrene, which have no electron‐donating groups on the phenyl ring, led to low molecular weight polymers (M_n < 10,000) in the copolymerization with indene (1:1 v/v). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2449–2457, 2002