α‐Iminocarboxamide‐Ni Complex Immobilized on Acid‐Treated Montmorillonite as Catalyst for Ethylene Polymerization

The complex [N‐(2,6‐diisopropylphenyl)‐2‐(2,6‐diisopropylphenylimino)‐propanamidato‐κ²N,O](η¹‐benzyl)nickel(lutidine) is immobilized on an acid‐treated montmorillonite. When the montmorillonite is treated with alkylaluminum, the catalyst shows a high activity with high molecular‐weight polyethylene. The catalytic behavior of the polymerization suggests isomerization of the complex on acid sites of the support surface.     

Hydrodynamics and boiling phenomena of water droplets impinging on hot solid

The collision of single water droplets with a hot Inconel 625 alloy surface was investigated by a two-directional flash photography technique using two digital still cameras and three flash units. The experiments were conducted under the following conditions: the pre-impact diameters of the droplets ranged from 0.53 to 0.60 mm, the impact velocities ranged from 1.7 m/s to 4.1 m/s, and the solid surface temperatures ranged from 170 °C to 500 °C. When a droplet impacted onto the solid at a temperature of 170 °C, weak boiling was observed at the liquid/solid interface. At temperatures of 200 or 300 °C, numerous vapor bubbles were formed. Numerous secondary droplets then jetted upward from the deforming droplet due to the blowout of the vapor bubbles into the atmosphere. No secondary droplets were observed for a surface temperature of 500 °C at the low-impact Weber numbers (∼30) associated with the impact inertia of the droplets. Experiments using 2.5-mm-diameter droplets were also conducted. The dimensionless collision behaviors of large and small droplets were compared under the same Weber number conditions. At temperatures of less than or equal to 300 °C, the blowout of vapor bubbles occurred at early stages for a large droplet. At a surface temperature of 500 °C, the two dimensionless deformation behaviors of the droplets were very similar to each other.     

Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate

The collision dynamics of water droplets impacting onto a solid is studied by means of three-dimensional computer simulations. The Navier–Stokes equations for unsteady, incompressible, viscous fluids in the three-dimensional Cartesian coordinate system are approximated and solved by a finite difference method. The volume-of-fluid (VOF) technique is used to track the free liquid surface. Normal and oblique collisions of droplets with the substrate are simulated at low droplet impact inertia. The effect of impact angle on the deformation behavior of droplets is investigated. The experimental observations and the numerical results are in reasonable agreement. Theoretical aspects of the physics of the collision phenomena are addressed.     

Stereoselective Self‐Aggregation of 31‐Epimerically Pure Amino Analogs of Zinc Bacteriochlorophyll‐d in an Aqueous Micelle Solution

Zinc bacteriochlorophyll‐d analogs possessing an amino group instead of the original hydroxy group at the C3¹ position were prepared by chemical modification of naturally occurring chlorophyll‐a. The synthetic 3¹‐epimers were successfully separated by reverse phase HPLC to give diastereomerically pure samples. The stereochemistry of the chiral C3¹‐center in the separated amines was determined by NMR analysis of their diastereomeric amides as well as by their asymmetric synthesis from authentic stereoisomers. Both the epimers were monomeric in tetrahydrofuran to give sharp electronic absorption bands, while they self‐aggregated to form chlorosomal oligomers with the redshifted bands in an aqueous Triton X‐100 micelle solution (pH = 6.9). The resulting oligomers deaggregated by addition of p‐toluenesulfonic acid to give monomeric N‐protonated ammonium species. The aggregation and deaggregation were dependent on the 3¹‐stereochemistry, indicating that each epimer produced supramolecularly different self‐aggregates.     

Non‐hybridization single nucleotide polymorphism detection and genotyping assay through direct discrimination of single base mutation by capillary electrophoretic separation of single‐stranded DNA

The significant demands for single nucleotide polymorphism detection and genotyping assays have grown. Most common assays are based on the recognition of the target sequence by the hybridization with its specific probe having the complementary sequence of the target. Herein, a simple, label‐free, and economical non‐hybridization assay was developed for single nucleotide polymorphism detection and genotyping, based on the direct discrimination of single base mutation by simple capillary electrophoresis separation for single‐stranded DNA in an acidic electrophoretic buffer solution containing urea. Capillary electrophoresis separation of single‐base sequential isomers of DNA was achieved due to charge differences resulting from the different protonation properties of the DNA bases. Single nucleotide polymorphism detection and genotyping were achieved by discriminating the electropherogram pattern change, that is, peak number in the electropherogram, obtained by the proposed method. The successful practical application of the proposed method was demonstrated through single nucleotide polymorphism detection and genotyping on a known gene region of 84‐mer, in which guanine to adenine single‐base mutation is commonly observed, using a human hair sample in combination with genomic DNA extraction, polymerase chain reaction amplification, DNA purification from polymerase chain reaction products, and capillary electrophoresis separation.     

Fluorimetric assay for monoamine oxidases A and B by means of p-sulfamoylbenzylamine and benzylamine

p-Sulfamoylbenzylamine and p-hydroxybenzylamine are shown to be substrates for monoamine oxidase A and for monoamine oxidases A and B, respectively. This was established by studies on the selectivity of benzylamine derivatives as substrates using monoamine oxidase inhibitors. A sensitive fluorimetric method for the separate assay of monoamine oxidases A and B is described. p-Sulfamoylbenzaldehyde and benzaldehyde formed enzymatically from p-sulfamoylbenzylamine and benzylamine, a known substrate for monoamine oxidase B, are quantified by means of the selective fluorimetric determination of aromatic aldehydes with 2,2′-dithiobis(1-aminonaphthalene). The limits of detection for the p-sulfamoylbenzaldehyde and benzaldehyde formed enzymatically are, respectively, 300 and 150 pmol per assay tube. Monoamine oxidases A and B in rat brain mitochondrial tissue and human platelets were assayed.     

Furopyridines. VIII. Molecular structure and two-dimensional NMR spectral assignment of 2,14-dimethyl-8aβ-hydroxy-7,10-dioxo-5β,6β-(propano)-6α,8α-(ethanoimino)-trans-perhydroisoquinoline

This paper reports the two-dimensional nmr spectral assignment and the X-ray structural determination of 2,14-dimethyl-8β-hydroxy-7,10-dioxo-5β,6β-(propano)-6α,8α-(ethanoimino)-trans-perhydroisoquinoline V which was obtained from 7,10-dimethyl-2β-hydroxy-14-oxo-2,3-(methanoiminoethano)-3β,4β-(propano)-3,4,5,6,7,8-hexahydro-2H-pyrano[2,3-c]pyridine IV by isomerization with hydrochloric acid. Both the compounds IV and V afforded the same dimethiodide IV -2MeI, while the configurational isomer 2,14-dimethyl-8aβ-hydroxy-7,10-dioxo-5α,6β-(propano)-6α,8α-(ethanoimino)-trans-perhydroisoquinoline III gave monomethiodide III -Mel. The structures of these methiodides were also confirmed by X-ray analysis.     

trans‐(Cl)‐[Ru(5,5′‐diamide‐2,2′‐bipyridine)(CO)2Cl2]: Synthesis,Structure, and Photocatalytic CO2 Reduction Activity

A series of trans‐(Cl)‐[Ru(L)(CO)₂Cl₂]‐type complexes, in which the ligands L are 2,2′‐bipyridyl derivatives with amide groups at the 5,5′‐positions, are synthesized. The C‐connected amide group bound to the bipyridyl ligand through the carbonyl carbon atom is twisted with respect to the bipyridyl plane, whereas the N‐connected amide group is in the plane. DFT calculations reveal that the twisted structure of the C‐connected amide group raises the level of the LUMO, which results in a negative shift of the first reduction potential (E_p) of the ruthenium complex. The catalytic abilities for CO₂ reduction are evaluated in photoreactions (λ>400 nm) with the ruthenium complexes (the catalyst), [Ru(bpy)₃]²⁺ (bpy=2,2′‐bipyridine; the photosensitizer), and 1‐benzyl‐1,4‐dihydronicotinamide (the electron donor) in CO₂‐saturated N,N‐dimethylacetamide/water. The logarithm of the turnover frequency increases by shifting E_p a negative value until it reaches the reduction potential of the photosensitizer.     

Enantioselective construction of biaryl part in the synthesis of stegane related compounds

A Pd-mediated intramolecular aryl-aryl coupling reaction of phenyl benzoate derivatives were examined to form benzo[c]chromen-6-ones, and then enantioselective lactone-opening reaction with a borane-oxazaborolidine combination was carried out. The resulting biphenyl was transformed into a key intermediate for the stegane related compounds. The absolute configuration of the biphenyl is also discussed.     

Comparison between chlorosomes containing bacteriochlorophyll-c and chlorosomes containing bacteriochlorophyll-d isolated from two substrains of green sulfur photosynthetic bacterium Chlorobium vibrioforme NCIB 8327

Chlorosomes containing bacteriochlorophyll(BChl)-c and those containing BChl-d were isolated from two substrains of Chlorobium vibrioforme f. sp. thiosulfatophilum NCIB 8327, respectively. The two types of chlorosomes were investigated from the following aspect, what kinds of effects the molecular structure of chlorosomal BChls had on structural and spectroscopic properties of in vivo self-aggregates in chlorosomes without alteration of the other components such as chlorosomal proteins and lipids; both chlorosomes were expected to have the same components except for light-harvesting BChls. In their visible absorption spectra, the differences of Soret and Q(y) peak positions between BChl-c containing and BChl-d containing chlorosomes were similar to the differences between monomeric BChl-c and d. An inverse S-shaped CD signal in the Q(y) region of BChl-d containing chlorosomes was 1.4 times larger than that of BChl-c containing chlorosomes, when the Q(y) absorbance of the two chlorosomes was almost the same. This implies that the excitonic interaction of BChl-d is larger than that of BChl-c in natural chlorosomes. Resonance Raman spectroscopy showed that BChl self-assemblies in both chlorosomes were essentially formed by the same local structural interaction among 3(1)-hydroxy group, 13-keto group, and central magnesium. BChl-d self-aggregates in chlorosomes were more tolerant of 1-hexanol than in vivo BChl-c aggregates, suggesting that the molecular structure of BChl-d provided more stable self-assemblies than BChl-c in natural chlorosomes.