Synthesis of 5H-pyrido[2,3-a]phenoxazin-5-one and 5H-pyrido[3,2-a]phenoxazin-5-one derivatives

The 5H-pyrido[2,3-a]phenoxazin-5-one derivatives and 5H-pyrido[3,2-a]phenoxazin-5-one derivatives were prepared by the condensation of substituted 2-aminophenols with 6,7-dibromo-5,8-quinolinequinone followed by dehalogenation in the presence of sodium hydrosulfite dissolved in aqueous pyridine under a nitrogen atmosphere.     

Linear NiII-MnIII2-NiII tetramers: an oligomeric component of the MnIII2NiII single-chain magnets

Heterometallic linear tetramers [Mn(5-R-saltmen)Ni(pao)(bpy)(2)](2)(ClO(4))(4) (5-R-saltmen(2-) = N,N'-1,1,2,2-tetramethylethylene bis(5-R-salicylideneiminate); pao(-) = pyridine-2-aldoximate; bpy = 2,2'-bipyridine, R = H, 1; Cl, 2; Br, 3; MeO, 4) have been synthesized and structurally characterized. These compounds exhibit a [Ni(II)-NO-Mn(III)-(O)(2)-Mn(III)-ON-Ni(II)] skeleton where -ON- is an oximate bridge between Mn(III) and Ni(II) ions and -(O)(2)- is a bi-phenolate bridge between Mn(III) ions. These tetramers can be seen as oligomeric units of the heterometallic Mn(III)(2)-Ni(II) chain observed in a family of single-chain magnets (Clérac, R.; Miyasaka, H.; Yamashita, M.; Coulon, C. J. Am. Chem. Soc. 2002, 124, 12837. Miyasaka, H.; Clérac, R.; Mizushima, K.; Sugiura, K.; Yamashita, M.; Wernsdorfer, W.; Coulon, C. Inorg. Chem. 2003, 42, 8203.). Magnetic measurements on these tetramers confirm the nature of the magnetic interactions reported for the Mn(III)(2)-Ni(II) chains: a strong antiferromagnetic Mn(III)/Ni(II) coupling via the oximate bridge (J(Ni-Mn) ranges from -23.7 to -26.1 K) and a weak ferromagnetic Mn(III)/Mn(III) coupling through the bi-phenolate bridge (J(Mn-Mn) ranges from +0.4 to +0.9 K). These magnetic interactions lead to tetramers with an S = 2 ground state.     

Lannotinidines A-G, new alkaloids from two species of Lycopodium

Seven new Lycopodium alkaloids, lannotinidines A-G (1-7), have been isolated from the club moss Lycopodium annotinum and L. annotinum var. acrifolium. Stereochemistry of 1-7 was elucidated by combination of NOESY correlations and chemical transformation. Lannotinidines B-E (2-5) elevated NGF mRNA expression.     

MnIII2 (5-Rsaltmen)2NiII(pao)2(L)]2+: an S(T)=3 building block for a single-chain magnet that behaves as a single-molecule magnet

Mn(III)-Ni(II)-Mn(III) linear-type trinuclear complexes bridged by oximate groups were selectively synthesized by the assembly reaction of [Mn2(5-Rsaltmen)2(H2O)2](ClO4)2 (5-Rsaltmen2-=N,N'-(1,1,2,2-tetramethylethylene) bis(5-R-salicylideneiminate); R=Cl, Br) with [Ni(pao)2(phen)] (pao-=pyridine-2-aldoximate; phen=1,10-phenanthroline) in methanol/water: [Mn2(5-Rsaltmen)2Ni(pao)2(phen)](ClO4)2 (R=Cl, 1; R=Br, 2). Structural analysis revealed that the [Mn(III)-ON-Ni(II)-NO-Mn(III)] skeleton of these trimers is in every respect similar to the repeating unit found in the previously reported series of 1D materials [Mn2(saltmen)2Ni(pao)2(L1)2](A)(2) (L(1)=pyridine, 4-picoline, 4-tert-butylpyridine, N-methylimidazole; A=ClO4-, BF4-, PF6-, ReO4-). Recently, these 1D compounds have attracted a great deal of attention for their magnetic properties, since they exhibit slow relaxation of the magnetization (also called single-chain magnet (SCM) behavior). This unique magnetic behavior was explained in the framework of Glauber's theory, generalized for chains of ferromagnetically coupled anisotropic spins. Thus, in these 1D compounds, the [Mn(III)-ON-Ni(II)-NO-Mn(III)] unit was considered as an S(T)=3 anisotropic spin. Direct-current magnetic measurements on 1 and 2 confirm their S(T)=3 ground state and strong uniaxial anisotropy (D/k(B) approximately -2.4 K), in excellent agreement with the magnetic characteristic deduced in the study on the SCM series. The ac magnetic susceptibility of these trimers is strongly frequency-dependent and characteristic of single-molecule magnet (SMM) behavior. The relaxation time tau shows a thermally activated (Arrhenius) behavior with tau0 approximately 1x10(-7) s and Delta(eff)/k(B) approximately 18 K. The effective energy barrier for reversal of the magnetization Delta(eff) is consistent with the theoretical value (21 K) estimated from |D| S2T. The present results reinforce consistently the interpretation of the SCM behavior observed in the [Mn2(saltmen)2Ni(pao)2(L1)2](A)2 series and opens new perspectives to design single-chain magnets.     

Investigation of the crystal structure and the structural and magnetic properties of SrCu2(PO4)2

SrCu2(PO4)2 was prepared by the solid-state method at 1153 K. Its structure was solved by direct methods in the space group Pccn (No. 56) with Z = 8 from synchrotron X-ray powder diffraction data measured at room temperature. Structure parameters were then refined by the Rietveld method to obtain the lattice parameters, a = 7.94217(8) A, b = 15.36918(14) A, and c = 10.37036(10) A. SrCu2(PO4)2 presents a new structure type and is built up from Sr2O16 and Cu1Cu2O8 units with Cu1...Cu2 = 3.256 A. The magnetic properties of SrCu2(PO4)2 were investigated by magnetic susceptibility, magnetization up to 65 T, Cu nuclear quadrupole resonance (NQR), electron-spin resonance, and specific heat measurements. With spin-dimer analysis, it was shown that the two strongest spin-exchange interactions between Cu sites result from the Cu1-O...O-Cu2 and Cu2-O...O-Cu2 super-superexchange paths with Cu1...Cu2 = 5.861 A and Cu2...Cu2 = 5.251 A, and the superexchange associated with the structural dimer Cu1Cu2O8 is negligible. The magnetic susceptibility data were analyzed in terms of a linear four-spin cluster model, Cu1-Cu2-Cu2-Cu1 with -2J(1)/kB = 82.4 K for Cu1-Cu2 and -2J(2)/k(B) = 59 K for Cu2-Cu2. A spin gap deduced from this model (Delta/kB = 63 K) is in agreement with that obtained from the Cu NQR data (Delta/kB = 65 K). A one-half magnetization plateau was observed between approximately 50 and 63 T at 1.3 K. Specific heat data show that SrCu2(PO4)2 does not undergo a long-range magnetic ordering down to 0.45 K. SrCu2(PO4)2 melts incongruently at 1189 K. We also report its vibrational properties studied with Raman spectroscopy.     

Photodegradation of polyethylene in the presence of ferric chloride

Effects of ferric chloride (FeCl₃) on photodegradation of high-density polyethylene (PE) were investigated by using ESR and infrared spectrometry. In the system with irradiation at light of λ > 220 nm, PE irradiated at 77°K yielded an 8-line spectrum, the intensity of which was markedly weakened by using FeCl₃ with the sample, indicating a distinct depression of radical formation. On the other hand, PE with the use of FeCl₃ yielded radicals under irradiation only with light of λ > 300 nm, showing a singlet spectrum with a line width of 15 gauss. For photooxidized PE, almost the same effect of FeCl₃ was observed. On irradiation at room temperature, PE samples with and without FeCl₃ showed a singlet spectrum with line widths of 15 and 25 gauss, respectively. On the other hand, the unsaturated double bond contained in a small amount in PE sample was observed by infrared study to be decreased with photoirradiation; however, the decrease was sharply depressed with the addition of FeCl₃ to the sample. The degradation of carbonyl group in a photooxidized sample was markedly affected by photoirradiation, and the decay was obviously reduced for the sample on addition of FeCl₃. It is concluded that FeCl₃ works upon photodegradation of PE to enhance the Norrish type II reaction and to accelerate the formation of unsaturated double bond in the chain.     

Benzyne-induced ring opening reaction of thiiranes. Efficient synthesis of phenyl vinyl sulfides

A series of thiiranes react with benzyne to provide an efficient synthesis of phenyl vinyl sulfides. The reaction is stereospecific, thus producing cis-(phenylthio)-stilbene from cis-2,3-diphenylthiirane and trans-(phenylthio)stilbene from trans-2,3-diphenylthiirane.     

Molecular interactions between lipid bilayers and a water-soluble polymer

Molecular interactions between lipid bilayers (liposomes) and chondroitin sulfate C (CS), a water soluble polymer, have been investigated in terms of zeta-potential, particle size, microscopic-viscosity, microscopic-polarity of liposomes and permeability of calcein. Microscopic morphology is dramatically changed by the addition of CS to the positively charged liposomes (Pos.L), while it is not changed by the addition to uncharged liposomes (Unc.L) or negatively charged liposomes (Neg.L). The absolute value of the particle size of Pos.L increases with the addition of CS, while the zeta- potential of Pos.L decreases. Permeability of Pos.L decreases with an increase in the concentration of CS. Phase transition temperature of Pos.L is changed after the addition of CS. These values, however, are not changed for the other liposomes by the addition of CS. The results of gel filtration chromatography show that CS is absorbed on the Pos.L surface. Microscopic viscosity is also increased by the addition of CS to Pos.L due to the adsorption of CS.     

Mass spectrometric studies on gibberellins

Based on the element maps of twenty-two gibberellin methyl esters fragmentations are discussed, which are characteristic of the common structural features as well as structural modification in gibberellin homologues.     

Separation selectivity of anionic metal complexes of N,N'-bis(hydroxybenzyl)ethylenediamine-N,N'-diacetic acid in ion and ion electrokinetic chromatography

The complexes of Fe(III), Co(III), Mn(III), Al(III), Cu(II), Ni(II), Cd(II) and Zn(II) with N,N'-bis(hydroxybenzyl)ethylenediamine-N,N'-diacetic acid (HBED) were separated by ion exchange in different modes: ion chromatography (IC) and ion electrokinetic chromatography (IEKC). In column IC these complexes were separated on an IonPac AS4a anion-exchange column (Dionex, USA). Parameters of the background electrolyte that were examined in IEKC mode include polymer, competing ion concentration and pH. The use of poly(diallyldimethylammonium chloride) (PDADMACl) as a modifier in IEKC provides separation selectivity only slightly different from that observed in IC on the IonPac AS4a column. Optimal separation conditions were found to be: 0.1 mM HBED, 50 mM PDADMAOH, 10 mM Na2 B4 O7, pH adjusted to 10 with acetic acid. The use of an aromatic ligand allowed a 10-fold decrease in detection limits of metal ions in comparison with previously studied EDTA. A separation efficiency up to 400,000 theoretical plates was demonstrated for IEKC.