Development of a novel analytical method for determination of chondroitin sulfate using an in-capillary enzyme reaction

A novel analytical method for determination of total amount of chondroitin sulfate (CS) based on its conversion to desulfated chondro-disaccharide via an enzyme-catalyzed reaction, was developed. Using the in-capillary enzyme reaction, the method was also applied to the successful construction of an on-line analytical system. Within this system, electrophoretic migration was used to mix zones containing the enzyme mixture (chondroitinase ABC, chondro-4-sulfatase, chondro-6-sulfatase and 2-o-sulfatase) and the substrate (CS). The reaction was then allowed to proceed in the presence of a weak electric field and, finally, the product (desulfated chondro-disaccharide) of enzyme reaction migrated to the detector under the influence of an applied electric field. A polyvinyl alcohol-coated capillary was used to reduce protein adsorption. Desulfated chondro-disaccharide was successfully migrated toward the anode in 10 mM Tris-acetate buffer (pH 7.0) under reversed polarity and detected at 232 nm. The established method was validated and demonstrated to be applicable in the determination of total amount of CS in a commercial ophthalmic solution. No interference from the formulation excipients was observed. Good linearity was obtained, with correlation coefficients above 0.999. Recoveries and precisions ranged from 100.0 to 100.5%, and from 0.2 to 0.6% of the relative standard deviation, respectively. Good agreement was obtained between the established method and traditional photometric method based on carbazole reaction. In this study, application of the method to disaccharide compositional analysis was also performed.     

Perovskite-to-postperovskite transitions in NaNiF3 and NaCoF3 and disproportionation of NaCoF3 postperovskite under high pressure and high temperature

High-pressure structural phase transitions in NaNiF(3) and NaCoF(3) were investigated by conducting in situ synchrotron powder X-ray diffraction experiments using a diamond anvil cell. The perovskite phases (GdFeO(3) type) started to transform into postperovskite phases (CaIrO(3) type) at about 11-14 GPa, even at room temperature. The transition pressure is much lower than those of oxide perovskites. The anisotropic compression behavior led to heavily tilted octahedra that triggered the transition. Unlike oxide postperovskites, fluoropostperovskites remained after decompression to 1 atm. The postperovskite phase in NaCoF(3) broke down into a mixture of unknown phases after laser heating above 26 GPa, and the phases changed into amorphous ones when the pressure was released. High-pressure and high-temperature experiments using a multianvil apparatus were also conducted to elucidate the phase relations in NaCoF(3). Elemental analysis of the recovered amorphous samples indicated that the NaCoF(3) postperovskite disproportionated into two phases. This kind of disproportionation was not evident in NaNiF(3) even after laser heating at 54 GPa. In contrast to the single postpostperovskite phase reported in NaMgF(3), such a postpostperovskite phase was not found in the present compounds.     

Nanosize-induced drastic drop in equilibrium hydrogen pressure for hydride formation and structural stabilization in pd-rh solid-solution alloys

We have synthesized and characterized homogeneous solid-solution alloy nanoparticles of Pd and Rh, which are immiscible with each other in the equilibrium bulk state at around room temperature. The Pd-Rh alloy nanoparticles can absorb hydrogen at ambient pressure and the hydrogen pressure of Pd-Rh alloys for hydrogen storage is dramatically decreased by more than 4 orders of magnitude from the corresponding pressure in the metastable bulk state. The solid-solution state is still maintained in the nanoparticles even after hydrogen absorption/desorption, in contrast to the metastable bulks which are separated into Pd and Rh during the process.     

Gelatin methacrylate as a promising hydrogel for 3D microscale organization and proliferation of dielectrophoretically patterned cells

Establishing the 3D microscale organization of cells has numerous practical applications, such as in determining cell fate (e.g., proliferation, migration, differentiation, and apoptosis) and in making functional tissue constructs. One approach to spatially pattern cells is by dielectrophoresis (DEP). DEP has characteristics that are important for cell manipulation, such as high accuracy, speed, scalability, and the ability to handle both adherent and non-adherent cells. However, widespread application of this method is largely restricted because there is a limited number of suitable hydrogels for cell encapsulation. To date, polyethylene glycol-diacrylate (PEG-DA) and agarose have been used extensively for dielectric patterning of cells. In this study, we propose gelatin methacrylate (GelMA) as a promising hydrogel for use in cell dielectropatterning because of its biocompatibility and low viscosity. Compared to PEG hydrogels, GelMA hydrogels showed superior performance when making cell patterns for myoblast (C2C12) and endothelial (HUVEC) cells as well as in maintaining cell viability and growth. We also developed a simple and robust protocol for co-culture of these cells. Combined application of the GelMA hydrogels and the DEP technique is suitable for creating highly complex microscale tissues with important applications in fundamental cell biology and regenerative medicine in a rapid, accurate, and scalable manner.     

Communication: Synthetic Studies on Sialoglycoconjugates 25: Reactivity of Glycosyl Promoters in α-Glycosylation of N-Acetyl-Neuraminic Acid with the Primary and Secondary Hydroxyl Groups in the Suitably Protected Galactose and Lactose Derivatives

Development of an efficient α-glycoside synthesis of sialic acids is critically significant for the syntheses of sialoglycoconjugates, especially gangliosides which carry important biological functions¹ in biological systems. Previously, we demonstrated² a new α-glycosylation of sialic acids by use of dimethyl(methylthio)sulfonium triflate (DMTST)³ as the glycosyl promoter, the suitably protected glycosyl acceptors and the methyl 2-thioglycoside 1 of N-acetylneuraminic acid (Neu5Ac) as the donor in acetonitrile under kinetically controlled conditions, and accomplished⁴ the syntheses of a variety of gangliosides and their analogs.     

Matrix IR spectra and normal coordinate analysis for methanesulfenyl chloride and isotopic analogs

The IR spectra (4000-250 cm⁻¹) of CH₃SCl and CD₃SCl in solid argon have been obtained. Fundamental vibrations, except the torsional vibrations, have been assigned. Normal coordinate analysis has been carried out omitting the torsional modes.     

Characterization of magnetic nanoparticles modified with thiol functionalized PAMAM dendron for DNA recovery

Magnetic nanoparticles (MNPs) modified with the thiol functionalized polyamidoamine (PAMAM) dendron were synthesized to estimate their DNA recovery capabilities. Aminosilane-modified MNPs and MNPs surrounded by a phospholipid (distearoylphosphatidylethanolamine (DSPE)) bilayer were used as core particles. Cystamine-core PAMAM dendrimers were reduced by dithiothreitol to dendron thiols and chemically conjugated to the core particles. Characterization of the synthesis revealed an increase of the surface amine charge from generation 1 (G1) to G6, starting with an aminosilane initiator. Particle size distribution analysis indicated that G6 PAMAM-modified MNPs exhibited monodispersity in an aqueous solution. G6 PAMAM-MNPs and G6 PAMAM-PE-MNPs synthesized by the proposed method have equivalent DNA recovery abilities to PAMAM-MNPs prepared by the conventional divergent synthesis method. In optimized conditions, 96% of λDNA was recovered using G6 PAMAM-PE-MNPs. Therefore, the method for preparing PAMAM-MNPs and PAMAM-PE-MNPs proposed in this study will be a novel approach for producing DNA carriers for efficient DNA purification by magnetic separation.