Rapid and simultaneous analysis of dichlorvos, malathion, carbaryl, and 2,4-dichlorophenoxy acetic acid in citrus fruit by flow-injection ion spray ionization tandem mass spectrometry

A simple method for the rapid and simultaneous analysis of dichlorvos (DDVP), malathion, carbaryl, and 2,4-dichlorophenoxy acetic acid (2,4-D) in citrus fruit, which uses flow-injection ion spray ionization tandem mass spectrometry, has been developed for the first time. The method involves the combined use of stable isotopically labeled internal standards (DDVP-d₆, malathion-d₁₀, carbaryl-d₇, and 2,4-D-d₅) and a multiple reaction monitoring technique. The average recoveries for the pesticides at the same concentrations as their tolerance levels (DDVP: 0.1-0.2 μg g⁻¹; malathion: 0.5-4.0 μg g⁻¹; carbaryl: 1.0 μg g⁻¹; 2,4-D: 1.0-2.0 μg g⁻¹) ranged from 90 to 119% with the relative standard deviation (R.S.D.) ranging from 1.0 to 13.1% (n = 5). Analysis time, including sample preparation and determination, was only 15 min. The present method is effective for screening DDVP, malathion, carbaryl, and 2,4-D in citrus fruit.     

Purification of Food Color Red No. 106 (acid red) using pH-zone-refining counter-current chromatography

pH-Zone-refining counter-current chromatography was successfully applied to the separation of the main components of Food Color Red No. 106 (R-106, acid red, Color Index No. 45100). A 300-mg quantity of sample was separated using the following two-phase solvent system: n-butanol-water, 40 mM sulfuric acid in organic stationary phase and 30 mM ammonia in aqueous mobile phase. The obtained fractions were analyzed by high-performance liquid chromatography and fast atom bombardment mass spectrometry. The separation yielded 261.9 mg of main component of acid red with purity of 99.9%.     

A highly cis-selective synthesis of 2-ethynylaziridines by intramolecular amination of chiral bromoallenes: improvement of stereoselectivity based on the computational investigation

The base-mediated intramolecular amination of bromoallenes having an axial chirality is described. The treatment of (4S,aR)-4-alkyl-4-[N-(arylsulfonyl)amino]-1-bromobuta-1,2-dienes with NaH in DMF affords 2,3-cis-2-ethynylaziridines in good to excellent selectivity (2,3-cis:trans = 92:8-99:1). The reaction of (4S,aS)-bromoallenes with NaH/DMF also gives 2,3-cis-2-ethynylaziridines selectively (79:21-91:9). These experimental results have been rationalized by B3LYP density functional calculations together with the 6-31+G(d) basis set and the Onsager solvation model. The transition structures for cis-aziridine formation of both (4S,aR)- and (4S,aS)-bromoallenes in DMF are favored over the corresponding trans transition structures by 4.35 and 1.41 kcal/mol, respectively. Furthermore, the calculations predicted that a less polar solvent gives higher cis selectivity for (4S,aS)-bromoallenes. In fact, improvement of the cis selectivity to 99:1 has been realized by using a less polar solvent such as THF. The cyclization of bromoallenes bearing a beta- or gamma-amino group also affords four- and five-membered azacycles in a highly cis-selective manner.     

Diethylhydrogensilyl cyclic diethylsilylene derivatives in gas chromatography/mass spectrometry of hydroxylated steroids. III-Fragmentations of 5β-pregnane-17,20,21-triol derivatives

A reaction of N,O-bis-(diethylhydrogensilyl) trifluoroacetamide with 5β-pregnane-17,20,21-triols afforded diethylhydrogensilyl (DEHS) cyclic diethylsilylene (DES) derivatives. 5β-Pregnane-3α,17α,20β,21-tetraol yielded the 3α,21-bis-DEHS-17α,20β-DES compound, whereas the structure of the major product from its 20α isomer was assigned as the 3α,17α-bis-DEHS-20α,21-DES derivative, which would undergo facile isomerization to the unstable 3α,21-bis-DEHS-17α,20α-DES structure under electron ionization. Fragmentations of these DEHS-DES compounds are discussed on the basis of isotope labelling experiments, linked scanning data, and accurate mass measurements.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part I

A cationic polymerization of formaldehyde which gave a high molecular weight polymer was studied in liquid carbon dioxide at 20–50°C. In the polymerization without any catalyst both the rate of polymerization and the molecular weight of the resulting polymer increased rapidly with a decrease in the loading density of the monomer solution to the reaction vessel, and also increased with an increase in the initial monomer concentration. From these results it was concluded that the initiating species could be ascribed to an impurity contained in the monomer solution. Both the rate of polymerization and the degree of polymerization of the polymer also increased with rising temperature. The carboxylic acid added acted as a catalyst in the polymerization because of increase in the polymer yield, the molecular weight of polymer formed, and the number of moles of polymer chain with increasing dissociation constant of acid used. It was concluded that the polymerization in liquid carbon dioxide proceeded by a cationic mechanism. Methyl formate had no influence on the polymerization, but methanol and water acted as a chain-transfer agent.     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

Upgrade of the nuclear resonant scattering beamline, BL09XU in SPring-8

An Upgrade of the nuclear resonant scattering beamline, BL09XU in SPring-8 has been conducted. A liquid nitrogen cooled high-heat load monochromator was installed and a 2nd experimental hutch was constructed. The instruments installed in the hutch allow for a variety of sample conditions. Newly developed high-resolution monochromators with better stability including the back scattering geometry monochromator have opened up the easy access to more isotopes and more precise measurements.