Energy-saving drying technology for porous media using liquefied DME gas

Process design and energy requirement for a practical plant are investigated for an energy-saving drying (dewatering) process invented by the authors in 2002 for high-moisture porous materials. The basic concept of the process involves the extraction of water from a high-moisture porous material by bringing it in physical contact with liquefied dimethyl ether (DME) at room temperature. Water content of DME asymptotically increases to the saturation value and the high-moisture porous material is dried almost perfectly. DME from the DME-water mixture is vaporized by decompression. DME and water are separated by flash distillation. DME vapor is compressed and cooled in a heat exchanger, and the latent heat of condensation is reused to vaporize the DME in the heat exchanger. Multistage compression and multistage flash distillation are employed. After compression, the temperature of DME is less than 50?°C. Because specific heat ratio of DME is only 1.11, the energy consumption of the compressor is reduced. Considering the adiabatic efficiency of the compressor and the net thermal efficiency, the total energy for dewatering is about 1100 kJ per 1-kg-water-content of the material being dewatered This process has significant potential and is compact than the existing dewatering processes.     

Characterization of atenolol transformation products on light-activated TiO2 surface by high-performance liquid chromatography/high-resolution mass spectrometry

We have studied the photocatalytic transformation of atenolol, 4-[2-hydroxy-3-[(1-methyl)amino]propoxyl]benzeneacetamide, a cardioselective beta-blocking agent used to treat cardiac arrhythmias and hypertension, under simulated solar irradiation using titanium dioxide as photocatalyst. The investigation involved monitoring drug decomposition, identifying intermediate compounds, assessing mineralization, and evaluating toxicity. High-performance liquid chromatography (HPLC) coupled to high-resolution mass spectrometry (HRMS) via an electrospray ionization (ESI) interface was a powerful tool for the identification and measurement of the degradation products; 23 main species were identified. Intermediates were characterized through their chromatographic behavior and evolution kinetics, coupled with accurate mass information. Through the full analysis of MS and MS(n) spectra and a comparison with parent drug fragmentation pathways, the diverse isomers were characterized. Neither atenolol nor the intermediates formed exhibit acute toxicity. All intermediates are easily degraded and no compound identified could withstand 2 h irradiation. Photomineralization of the substrate in terms of carbon mineralization and nitrogen release was rapid and, within 4 h of irradiation, organic nitrogen and carbon were completely mineralized.     

An efficient unnatural base pair for PCR amplification

Expansion of the genetic alphabet by an unnatural base pair system provides a powerful tool for modern biotechnology. As an alternative to previous unnatural base pairs, we have developed a new pair between 7-(2-thienyl)imidazo[4,5-b]pyridine (Ds) and 2-nitropyrrole (Pn), which functions in DNA amplification. Pn more selectively pairs with Ds in replication than another previously reported pairing partner, pyrrole-2-carbaldehyde (Pa). The nitro group of Pn efficiently prevented the mispairing with A. High efficiency and selectivity of the Ds-Pn pair in PCR amplification were achieved by using a substrate mixture of the gamma-amidotriphosphate of Ds and the usual triphosphates of Pn and the natural bases, with Vent DNA polymerase as a 3' to 5' exonuclease-proficient polymerase. After 20 cycles of PCR, the total mutation rate of the Ds-Pn site in an amplified DNA fragment was approximately 1%. PCR amplification of DNA fragments containing the unnatural Ds-Pn pair would be useful for expanded genetic systems in DNA-based biotechnology.     

Layer-engineering of high-Tc superconductors: (Cu,Mo)Sr2(Ce,Y)4Cu2O13+delta with a quadruple-fluorite-layer block between CuO2 planes

Among high-Tc superconductive copper oxides, there have been known phases that contain fluorite-structured layers as an additional "blocking block" between adjacent CuO2 planes. Here, we report that even a phase with the CuO2 planes separated by a 12-A thick quadruple-fluorite-layer block can be synthesized in a single phase and strongly oxygenated form to exhibit superconductivity with a Tc value as high as 55 K. The new phase is the fourth member of the (Cu,Mo)Sr2(Ce,Y)sCu2O(5+2s+delta) or (Cu,Mo)-12s2 homologous series. Comparison with the previously known s = 1, 2, and 3 members of the series reveals the amazing conclusion that Tc remains essentially unaffected upon inserting additional fluorite-structured layers between the two CuO2 planes as long as the hole-doping level of the planes is kept constant.     

Temperature-controlled changeable oxygenation selectivity by singlet oxygen with a polymeric photosensitizer

A polymeric photosensitizer, poly(NIPAM-co-RB), consisting of N-isopropylacrylamide and rose bengal units, demonstrates a temperature-controlled changeable oxygenation selectivity by singlet oxygen in water.     

Highly specific affinities of short peptides against synthetic polymers

We investigated polymer-binding 7-mer peptides that recognize differences in the polymer stereoregularity of all-purpose poly(methyl methacrylate)s (PMMAs) with simple chemical structures. Quantitative surface plasmon resonance measurements detected association/dissociation processes of the peptides against PMMA film surfaces, followed by an estimation of kinetic parameters such as association/dissociation rate constants and affinity constants. Greater association and smaller dissociation constants of the peptides were observed against a target isotactic PMMA than the structurally similar reference syndiotactic PMMA, followed by greater affinity constants against the target. A c02 peptide composed of the Glu-Leu-Trp-Arg-Pro-Thr-Arg sequence showed the greatest affinity constant (2.8x10(5) M(-1)) for the target, which was 41-fold greater than that for the reference, thus demonstrating extremely high peptide specificities. The substitution of each amino acid of the c02 peptide to Ala (Ala scanning) clearly revealed the essential amino acids for the affinity constants; the essential order was Pro5>Thr6>Arg7>Glu1>Arg4. In fact, the shorter 4-mer peptide composed of the C-terminal Arg-Pro-Thr-Arg sequence of the c02 peptide still demonstrated strong target specificity, although the N-terminal 4-mer peptide Glu-Leu-Trp-Arg completely lost its specificity. The possible conformations modeled with Molecular Mechanics supported the significance of the Arg-Pro-Thr-Arg sequence. The thermodynamic parameters of the c02 peptide suggested an induced fit mechanism for the specific affinity. The present affinity analyses of polymer-recognizing peptides revealed significant and general information that was essential for potential applications in peptidyl nanomaterials.     

Synthesis of nickel nanoparticles supported on hollow samaria-doped ceria particles via the solution-spray plasma technique: Anode catalysts for SOFCs

Aiming at SOFC anode applications, we have synthesized nanometer-sized nickel catalysts supported on hollow spherical particles of samaria-doped ceria (Ni/SDC) by spraying a mixed solution of nickel, samarium, and cerium nitrates into an atmospheric pressure plasma. The as-prepared particles consisted of SDC (average diameter d_SDC = ca. 0.8 µm) and uniformly dispersed nanometer-sized NiO particles. When reduced in H₂ at 800 °C or 1000 °C, Ni nanoparticles (average diameter d_Ni = 34 nm) were found to be embedded uniformly into the SDC surface.     

Chemiluminescence from singlet oxygen that was detected at two wavelengths and effects of biomolecules on it

We developed the detection apparatus that equipped with the two-photomultiplier tubes for chemiluminescence from singlet oxygen. Singlet oxygen was generated with reaction between sodium hypochlorite and hydrogen peroxide. The chemiluminescence from singlet oxygen, the dimol light emission (ca. 634 nm) and the monomol light emission (ca. 1270 nm), was observed simultaneously for the same reaction cell. The effects of sodium azide as an antioxidant, human serum albumin, and α-amino acids on the chemiluminescence based on the both emissions were examined; the observed chemiluminescence could provide direct information with regard to the reaction between singlet oxygen and antioxidant/biomolecules. The apparent rate constants for quenching singlet oxygen in the presence of human serum albumin were calculated to be ca. 3.3 × 10⁹ and ca. 8.8 × 10⁸ M⁻¹ s⁻¹ for the dimol and monomol light emissions, respectively, under the present conditions. The chemiluminescence intensities of the dimol emission decreased in the presence of His, Asp, Phe, Ser, and Tyr, and that of the monomol decreased in the presence of Cys and Trp. The chemiluminescence observed in the presence of biomolcules was discussed together with the reactivities of sodium hypochlorite and hydrogen peroxide to biomolecules.     

Synthesis of collagen-like sequential polypeptides containing O-phospho-L-hydroxyproline and preparation of electrospun composite fibers for possible dental application

A synthetic route is described for collagen-like polypeptides constructed from O-phospho-L-hydroxyproline [Hyp(PO(3)H(2))] residues. Using the synthetic polypeptides and a natural protein, gelatin, fine fibers and their network structures (ESNWs) were prepared via electrospinning. The composite ESNWs can induce the mineralization of calcium phosphate. The phosphoryl groups of the Hyp(PO(3)H(2)) residues affect both the crystalline phase and amount of the calcium phosphate, depending on the chemical structure in the repeating sequence. The composite ESNWs can be developed as a biocompatible replacement of the extracellular matrix of hard tissues, and thus can be applied as dental materials for restoration of dental cavities or as a sealant for pits and fissures.