Stereoselective synthesis of (Z)-2-fluoro-1-alkenyl(phenyl)iodonium tetrafluoroborates

[reaction: see text] (Z)-2-Fluoro-1-alkenyl(phenyl)iodonium salts were stereoselectively prepared by the reaction of alkynyl(phenyl)iodonium salts with aqueous HF in good yields. The method is applicable to the synthesis of fluoroalkenyliodonium salts having functional groups such as ketone, ester, and chloride. (Z)-2-Fluoro-1-alkene, (Z)-2-fluoro-2-alkenoate, and (Z)-beta-fluoroenyne could be stereoselectively prepared from the fluoroalkenyliodonium salt.     

An iron reservoir model based on ferrichrome: iron(III)-binding and metal(III)-exchange properties of tripodal monotopic and ditopic hydroxamate ligands with an L-alanyl-L-alanyl-N-hydroxy-beta-alanyl sequence

To gain knowledge about biological iron mobilization, tripodal monotopic and ditopic hydroxamate ligands (1 and 2) are prepared, and their iron-chelating properties are investigated. Ligands 1 and 2 contain three Ala-Ala-beta-(HO)Ala units and three [Ala-Ala-beta-(HO)Ala](2) units connected with tris(alanylaminoethyl)amine, respectively, and form six-coordinate octahedral complexes with iron(III) in aqueous solution. Ligand 1 and 1 equiv of iron give Fe-1, and ligand 2 and 1 or 2 equiv of iron produce Fe(1)-2, or Fe(2)-2. These complexes exhibit absorptions at lambda(max) 425 nm of epsilon 2800-3000/Fe, characteristic of tris(hydroxamato)iron(III) complexes, and preferentially assume the Delta-cis configuration. Loading of Fe(III) on 1, 2, and M(III)-loaded ligands (M-1 and M(1)-2, M = Al, Ga, In) with ammonium ferric oxalate at pH 5.4 is performed, and the second-order rate constants of loading with respect to Fe(III) and the ligand or M(III)-loaded ligands are determined. The rates of loading of Fe(III) on M-1 increase in the order Al-1 < Ga-1 < In-1, and those on M(1)-2 in the order Al(1)-2 < Ga(1)-2 < Fe(1)-2 < In(1)-2, indicating that the dissociation tendency of M(III) ions from the hydroxamate ligand is an important factor. The iron complexes formed with 2 are subjected to an iron removal reaction with excess EDTA in aqueous pH 5.4 solution at 25.0 degrees C, and the collected data are analyzed by curve-fitting using appropriate first-order kinetic equations, providing the rate constants for the upper site and the lower site of 2. Similar analysis for FeM-2 affords removal rate constants for Fe(up)-2, M(up)-2, and Fe(low)-2, and the iron residence probability at each site. The protonation constants of the hydroxamate groups for 1 and 2 (pK(1,) pK(2), pK(3), and pK(1,) pK(2)., pK(6)) are determined, and the proton-independent stability constants for Fe-1, the upper site of Fe(2)-2, and the lower site of Fe(1)-2 are 10(28), 10(29), and 10(28.5), respectively.     

Stabilization of very rare tautomers of 1-methylcytosine by an excess electron

We characterized valence anionic states of 1-methylcytosine using various electronic structure methods. We found that the most stable valence anion is related to neither the canonical amino-oxo nor a rare imino-oxo tautomer, in which a proton is transferred from the N4 to N3 atom. Instead, it is related to an imino-oxo tautomer, in which the C5 atom is protonated. This anion is characterized by an electron vertical detachment energy (VDE) of 2.12 eV and it is more stable than the anion based on the canonical tautomer by 1.0 kcal/mol. The latter is characterized by a VDE of 0.31 eV. Another unusual low-lying imino-oxo tautomer with a VDE of 3.60 eV has the C6 atom protonated and is 3.6 kcal/mol less stable than the anion of the canonical tautomer. All these anionic states are adiabatically unbound with respect to the canonical amino-oxo neutral, with the instability of 5.8 kcal/mol for the most stable valence anion. The mechanism of formation of anionic tautomers with carbon atoms protonated may involve intermolecular proton transfer or dissociative electron attachment to the canonical neutral tautomer followed by a barrier-free attachment of a hydrogen atom to the C5 or C6 atom. The six-member ring structure of anionic tautomers with carbon atoms protonated is unstable upon an excess electron detachment. Indeed the neutral systems collapse without a barrier to a linear or a bicyclo structure, which might be viewed as lesions to DNA or RNA. Within the PCM hydration model, the anions become adiabatically bound with respect to the corresponding neutrals, and the two most stable tautomers have a carbon atom protonated.     

Adsorption factor and photocatalytic degradation of dye-constituent aromatics on the surface of TiO2 in the presence of phosphate anions

The photocatalytic degradation for some kinds of dye-constituent aromatics with TiO₂ in the presence of phosphate anions in aqueous dispersion was investigated under both visible light (λ>480 nm) and UV irradiation. The influences of phosphate anion upon the degradation of organics under these different conditions was revealed by the measurement of point of zero ξ-potential (P _ZC) of TiO₂, UV-VIS spectra, HPLC and LC-MS. The adsorption and photodegradation of some organics, which adsorb on the surface of TiO₂ by a dominating group bearing a positive charge, was enhanced, while that of others, which adsorb on the surface of TiO₂ by a dominating group bearing negative charge, was depressed by the presence of phosphate anions under UV irradiation at the experimental conditions (pH 4.3). It was confirmed that better adsorption of organics on the surface of TiO₂ had an advantage in their photocatalytic degradation under UV irradiation. On the other hand, although the adsorption of rhodamine B (RhB) and methylene Blue (MB) markedly increased, their degradation under visible light irradiation was depressed in the presence of phosphate anions. It is suggested that phosphate anion greatly blocked the electron transfer from excited RhB and MB molecules as RhB and MB molecules predominantly adsorbed on the surface of TiO₂ through the electrostatic interaction with surface adsorbed phosphate anions.     

Kinetics of γ-ray polymerization of formaldehyde in the presence of carbon dioxide

A kinetic study of the γ-ray polymerization of formaldehyde in toluene solution in the presence of carbon dioxide was carried out at temperatures of + 13 to ?17°C. Two modes of the polymerization, spontaneous and γ-ray polymerization, occur in this system. The γ-ray polymerization, experimentally separated from the spontaneous polymerization, was investigated. The rate of γ-ray polymerization increased slightly with the square root of carbon dioxide concentration. The rate of polymerization was also found to be proportional to the dose rate and the square of monomer concentration. The molecular weight of polymer formed was independent of the reaction condition. The apparent activation energy was estimated to be 10.3 kcal./mole. The kinetics of the γ-ray polymerization in the presence of carbon dioxide are explained quantitatively by a cationic mechanism, and the role of carbon dioxide is as an action of retardation for neutralization of the cationic initiating species, which was produced by γ-radiation, by means of a reverse reaction with an electron. Physical and mechanical properties of the polymer obtained by γ-ray polymerization were also investigated.     

Purification of Food Color Red No. 106 (acid red) using pH-zone-refining counter-current chromatography

pH-Zone-refining counter-current chromatography was successfully applied to the separation of the main components of Food Color Red No. 106 (R-106, acid red, Color Index No. 45100). A 300-mg quantity of sample was separated using the following two-phase solvent system: n-butanol-water, 40 mM sulfuric acid in organic stationary phase and 30 mM ammonia in aqueous mobile phase. The obtained fractions were analyzed by high-performance liquid chromatography and fast atom bombardment mass spectrometry. The separation yielded 261.9 mg of main component of acid red with purity of 99.9%.     

A novel class of inhibitors for human steroid 5alpha-reductase: synthesis and biological evaluation of indole derivatives. II

In a search for novel nonsteroidal inhibitors of human prostatic 5alpha-reductase, we found a new series of indole derivatives that showed potent inhibitory activities for the human enzyme. Among them, 4-[(1-benzyl-1H-indol-5-yl)oxyl-3-chlorobenzoic acid (2d, YM-32906) showed more potent inhibitory activity than finasteride with an IC50 value of 0.44 nM. 3-Chloro-4-[[1-(4-phenoxybenzyl)-1H-indol-5-yl]oxy]benzoic acid (2m) showed inhibitory activities for both human and rat prostatic 5alpha-reductase with IC50 values of 2.1 and 73 nM, respectively. The synthesis and structure-activity relationships of these indole derivatives are presented.     

Synthesis of 3-aminopyrazolo[3,4-d]pyrimidine derivatives using N-bis(methylthio)methylene-p-toluenesulfonamide

N-Bis(methylthio)methylene-p-toluenesulfonamide ( 1 ) reacted with active methylene compounds such as malononitrile ( 2a ) and, cyanoacetamide ( 2b ) to give the corresponding 3-methylthio-3-p-toluenesulfonylami-nopropenenitrile derivatives 3a,b which were found to be convenient starting materials for the synthesis of 3,5-diaminopyrazole derivatives. Reaction of 3a and 3b with hydrazines gave the corresponding 3,5-diaminopyrazoles 4a-e , key intermediates for the synthesis of 3-aminopyrazolo[3,4-d]pyrimidine derivatives 5a-d .     

Simultaneous analysis of tea catechins, caffeine, gallic acid, theanine and ascorbic acid by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatography (MEKC) method for the simultaneous analysis of five tea catechins, theanine, caffeine, gallic acid and ascorbic acid has been developed. The catechins are (-)-epicatechin, (+)-catechin, (-)-epigallocatechin, (-)-epicatechin gallate and (-)-epigallocatechin gallate. p-Nitrophenol serves as both reference and internal standard. All the components are separated within 13 min with a 57 cm uncoated fused-silica column. On-column detection was carried out at 200 nm. This method has been used to measure these compounds in fresh tea leaves and tea liquor. The limit of detection for all analytes ranged from 1 to 20 microg/ml.     

A highly cis-selective synthesis of 2-ethynylaziridines by intramolecular amination of chiral bromoallenes: improvement of stereoselectivity based on the computational investigation

The base-mediated intramolecular amination of bromoallenes having an axial chirality is described. The treatment of (4S,aR)-4-alkyl-4-[N-(arylsulfonyl)amino]-1-bromobuta-1,2-dienes with NaH in DMF affords 2,3-cis-2-ethynylaziridines in good to excellent selectivity (2,3-cis:trans = 92:8-99:1). The reaction of (4S,aS)-bromoallenes with NaH/DMF also gives 2,3-cis-2-ethynylaziridines selectively (79:21-91:9). These experimental results have been rationalized by B3LYP density functional calculations together with the 6-31+G(d) basis set and the Onsager solvation model. The transition structures for cis-aziridine formation of both (4S,aR)- and (4S,aS)-bromoallenes in DMF are favored over the corresponding trans transition structures by 4.35 and 1.41 kcal/mol, respectively. Furthermore, the calculations predicted that a less polar solvent gives higher cis selectivity for (4S,aS)-bromoallenes. In fact, improvement of the cis selectivity to 99:1 has been realized by using a less polar solvent such as THF. The cyclization of bromoallenes bearing a beta- or gamma-amino group also affords four- and five-membered azacycles in a highly cis-selective manner.