Circular dichroism and exciton effect of syndiotactic methacrylic polymers with chiral diacyl hydrazide side chain. II. Poly(methacrylic acid–Nβ (L-(+)-lactoyl) hydrazide)

Syndiotactic poly(methacrylic acid hydrazide) has been condensed with L -(+)-lactic acid to form optically active side chains which are connected to the main chain by diacyl hydrazide moieties. A model compound was prepared in the same way from pivalic acid hydrazide. The CD spectra of polymer and model compound have been recorded in aqueous solution at different pH. In the acidic and neutral range, a strong Cotton effect is observed at 195 nm for the polymer which is not present for the model. This Cotton effect may be part of an exciton doublet, the second half of which may be located below 190 nm, the limit of the CD spectrometer employed. In the alkaline region, the diacyl hydrazide moiety is deprotonated and the polymer leads in contrast to the model to a well developed exciton effect centered around a crossover point of 241 nm. The influence of the addition of alcohols and salt on the CD spectra is studied, as well as the effect of temperature. For both the acidic to neutral range on one hand, and the alkaline region, on the other hand, ordered conformations are postulated. For the alkaline region a specific helical conformation is discussed.     

Dielectric behaviour of a side-chain-bearing liquid-crystalline polysiloxane

The relaxation of electric field-induced polar orientation in a side-chain-bearing liquid-crystalline polysiloxane was measured by means of thermally stimulated depolarization currents. Different relaxation mechanisms were identified and characterized: the glass transition cooperative relaxation exhibits compensation behaviour. On the other hand, lowerT _g and upperT _g discharges were observed and their molecular nature is discussed.     

The behaviour of dyes at oil/water interfaces

Summary The adsorption of ionic dyes, the builder effect, and the interaction between ionic dyes and surface active agents were investigated by using the electrocapillarity at oil/water interfaces. The oil phase was the solution of tetra-butylammonium chloride, sodium cetylsulphate, cetylpyridinium chloride or stearylamine in methylisobutylketone, and the water phase contained various dyes in addition to the inorganic electrolyte. The interfacial tension decreased over the anodic (or cathodic) polarization range, when anionic (or cationic) dyes were added to the water phase, thus indicating the dye adsorption at the interface. The interfacial excess of dye ions was found to increase linearly with the cubic roots of dye concentration and of ionic strength of the water phase. The counterion binding took place at the oil/water interface between anionic (or cationic) dyes and positive (or negative) head groups of surface active agent ions adsorbed at the interface. It was found that the equilibrium constants of binding between anionic dyes and cationic surface active agents at the oil/water interface were of the same order of magnitude as, and a little larger than, those obtained at the water bulk phase.

---

Zusammenfassung An Öl-Wasser-Grenzflächen wurde die Adsorption ionischer Farbstoffe, die Füllerwirkung und die Wechselwirkung zwischen ionischen Farbstoffen und grenzflächenaktiven Verbindungen mit Hilfe der Elektrokapillarität untersucht. Die Ölphase bestand aus einer Lösung von Tetrabutylammoniumchlorid, Natriumcetylsulfat und Cetylpyridiniumchlorid oder Stearylamin in Methylisobutylketon. Die wässerige Phase enthielt verschiedene Farbstoffe und anorganische Elektrolyte. Die Grenzflächenspannung wurde durch anodische (bzw. kathodische) Polarisation erniedrigt, wenn anionischer (bzw. kationischer) Farbstoff zur Wasserphase gegeben wurde. Dies zeigt an, daß Farbstoff an der Grenzfläche adsorbiert wird. Die Grenzflächenkonzentration des Farbstoffions nimmt linear mit der Kubikwurzel der Farbstoffkonzentration und mit der Ionenstärke zu. Als Gegenionen für die anionischen (bzw. kationischen) Farbstoffe an der Grenzfläche wirken die positiven (bzw. negativen) Endgruppen der Tenside, die ebenfalls in der Grenzschicht adsorbiert sind. Die Gleichgewichtskonstanten für die Wechselwirkung zwischen den ionischen Farbstoffen und den grenzflächenaktiven Verbindungen sind an der Öl-Wasser-Grenzfläche von der gleichen Größenordnung bzw. geringfügig größer als in der wässerigen Volumenphase.

---

---

With 12 figures and 2 tables     

WAXS study on orthorhombic crystalline phases in hot-drawn high density polyethylene: POLYMER CHARACTERISATION

The temperature dependence in the range 23–135°C of hot-drawn HDPE plates maintained free from contraction was investigated by WAXS and DSC. A specially designed cylindrical chamber was used for the WAXS patterns. The results confirm the coexistence of two populations of orthorhombic crystals which have different lattice and thermal behaviour. The crystal lattice parameter a shows expansion, while b exhibits expansion up to 90°C, followed by contraction as the temperature is raised to melting. On the other hand, the c parameter is practically constant.     

Radical-initiated homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate

Ethyl α-hydroxymethylacrylate (EHMA) was synthesized and homopolymerized in bulk and in solution. The poly(EHMA) is readily soluble in alcohol, acetone, tetrahydrofuran, and methylene chloride at room temperature. Intramolecular lactone formation occurred when poly(EHMA) was heated to 180–230°C. The kinetics of EHMA homopolymerization was investigated in ethyl acetate, using α,α′-azobisisobutylonitrile as an initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.50[EHMA]^1.4 and the overall activation energy was calculated as 71.9 kJ/mol. Kinetic constants for EHMA polymerization were obtained as follows: k_p/k = 0.17L^0.9mol^?0.9s^?0.5; 2fk_d = 1.5 × 10^?5 s^?1. The relative reactivity ratios of EHMA(M₂) copolymerization with styrene (r₁ = 0.472, r₂ = 0.564) in ethyl acetate were obtained. Applying the Q-e scheme led to Q = 0.84 and e = 0.35 for EHMA.     

Site-selective photocycloadditions of 2-pyrones with electron-poor olefins and the derivation from the cycloadducts

Photosensitized cycloaddition of 4,6-dimethyl-2-pyrone ( 1 ) with methacrylonitrile ( 3b ) afforded two types of [2 + 2]cycloadducts, 4b and 6b , across the C₅-C₆ and C₃-C₄ double bonds in 1 , respectively. Photosensitized reactions of 1 with dimethyl maleate and dimethyl cyclobutene-1,2-dicarboxylate gave [2 + 2]cycload-ducts 4d, 4e across the C₅-C₆ double bond, in addition to [4 + 2]cycloadduct 9d or bicyclo[4.2.0]octadiene 10e . The photoreactions of methyl 2-pyrone-5-carboxylate ( 2 ) with 3b and 2-chloroacrylonitrile ( 3c ) gave [4 + 2]cycloadducts 5b, 5c in addition to [2 + 2]cycloadducts 11b and 11c across the C₅-C₆ double bond in 2 . The photocycloaddition mechanism was explained from results calculated by means of PM3-CI method. Namely, the site- and/or regio-selective products, 4, 5, 8, 9 and 10 were thought to come from the same site-selective radical intermediates in the case of electron-poor olefins. Pyrolysis and/or hydrolysis of the cycload-ducts 4e, 5b, 5c gave 5,6-dihydro-2-pyrone 12 or benzene derivatives.     

Study of the segmental dynamics in semi-crystalline poly(lactic acid) using mechanical spectroscopies

The glass transition of poly(L-lactic acid) (PLLA) occurs not far above typical service temperatures (room or body temperatures) which has consequences on the material properties during its use, such as damping or the occurrence of structural relaxation. This work aims at characterising the glass transition dynamics of a semi-crystalline PLLA using both dynamic mechanical analysis (DMA) and thermally stimulated recovery (TSR). The main viscoelastic parameters have been characterised at 1 Hz using DMA and the master curve obtained after isothermal experiments at different temperatures provided a full picture of the solid-state rheological behaviour throughout a wide frequency range. The activation energies calculated from the shift factors agree with the TSR ones, exhibiting a maximum near the T(g). Above the T(g), the results can be described with the WLF model. In the glassy state, the activation energy decreases with decreasing temperatures being always higher than the prediction of the Adam and Gibbs theory, at least down to temperatures 30 degrees C below the T(g). This suggests the existence of non-arrested degrees of freedom in the glassy state, being consistent with the existence of a significant degree of cooperativity in the TSR results.     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

35Cl NQR zeeman study of perchloro-bicyclopentadienyl by a pulsed FT nor spectrometer

Zeeman measurements were performed on ³⁵Cl NQR lines in a single crystal of perchloro-bicyclopentadienyl at room temperature by a pulsed FT NQR system. The compound gives ten NQR lines : ν₁ = 36347.6, ν₂ = 36361.2, ν₃ = 36634.2, ν₄ = 36684.8, ν₅ = 36715.5, ν₆ = 37008.0, ν₇ = 37194.4, ν₈ = 37266.9, ν₉ = 38871.1, and ν₀ = 39323.8(kHz) at 291.5 K. Each line yields two electric field gradients (efgt's) in a magnetic field. The asymmetry parameters (η) of ν₁, ν₂, ν₃, ν₄, ν₅, ν₆, ν₇, ν₈, ν₉ and ν₀ are 14.1, 14.0, 14.2, 13.9, 14.5, 9.6, 10.3, 12.1, 4.2 and 4.8%, respectively. From the relative orientations between the principal axes of the efgt's, the molecular structure has been deduced. The molecule has a cisoid conformation rotated by 51^o from the pure $\text{s}$-cis form. The rotation angle agrees well with the value calculated using Urey-Bradley force field constants.     

Layer‐by‐layer deposition of antimicrobial polymers on cellulosic fibers: a new strategy to develop bioactive textiles

In recent years, there has been an increase of infectious diseases caused by different microorganisms and the development of antibiotic resistance. In this way, the search for new and efficient antibacterial materials is imperative. The main polysaccharides currently used in the biomedical and pharmaceutical domains are chitin and its derivative chitosan (CH) and alginates (ALG). In this study, a simple technique of Layer by Layer (LbL) of applying polycation CH and polyanion ALG was used to prepare CH/ALG multilayers on cotton samples via the electrostatic assembly with success. The CH/ALG cotton samples (functionalized) were investigated for their antibacterial properties towards Staphylococcus aureus and Klebsiella pneumonia using the international standard method JIS L 1902:2002. The antibacterial activity of the functionalized samples was tested in terms of bacteriostatic and bactericidal activity, and results showed that the samples exhibited a bacteriostatic effect on the two bacteria tested, as expected. In addition, samples with five layers (CH/ALG/CH/ALG/CH) were more effective in inhibiting bacterial growth. This new coating for cellulosic fibers is a new strategy and may open new avenues for the development of antimicrobial polymers with potential application in health‐care field. Copyright © 2013 John Wiley & Sons, Ltd.