Potentiometric flow-injection determination of trace chlorine based on its redox reaction with an iron(III)/iron(II) buffer

A very sensitive and rapid potentiometric determination of trace chlorine in water is described. The method is based on the transient potential changes which appears during the reduction of dissolved chlorin with an iron(III)/iron(II) potential buffer containing chloride and sulfuric acid. The sample is injected into a water carrier stream and merged with a stream of this potential buffer solution; chlorine is reduced during passage through a short reaction coil. The potential change from the baseline is measured with a flow-through ORP (oxidation-reduction potential) electrode. Potential changes (peak heights) are proportional to chlorine concentrations from 10^?7 M to 10^?5 M. The detection limit is 5 × 10^?8 M (3.5 μgl^?1 as Cl₂). The sample throughput is 45 h^?1. Reproducibility is in the range 2.5–1.1%. Results for potable water agree with those obtained by the o-tolidine method.     

Reactions of acetonitrile coordinated to a nitrosylruthenium complex with H2O or CH(3)OH under mild conditions: structural characterization of imido-type complexes

The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) (bpy = 2,2'-bipyridine) in H(2)O at room temperature proceeded to afford two new nitrosylruthenium complexes. These complexes have been identified as nitrosylruthenium complexes containing the N-bound methylcarboxyimidato ligand, cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+), and methylcarboxyimido acid ligand, cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+), formed by an electrophilic reaction at the nitrile carbon of the acetonitrile coordinated to the ruthenium ion. The X-ray structure analysis on a single crystal obtained from CH(3)CN-H(2)O solution of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](PF(6))(3) has been performed: C(22)H(20.5)N(6)O(2)P(2.5)F(15)Ru, orthorhombic, Pccn, a = 15.966(1) A, b = 31.839(1) A, c = 11.707(1) A, V = 5950.8(4) A(3), and Z = 8. The structural results revealed that the single crystal consisted of 1:1 mixture of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+) and cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+) and the structural formula of this single crystal was thus [Ru(NO)(NH=C(OH(0.5))CH(3))(bpy)(2)](PF(6))(2.5). The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) in dry CH(3)OH-CH(3)CN at room temperature afforded a nitrosylruthenium complex containing the methyl methylcarboxyimidate ligand, cis-[Ru(NO)(NH=C(OCH(3))CH(3))(bpy)(2)](3+). The structure has been determined by X-ray structure analysis: C(25)H(29)N(8)O(18)Cl(3)Ru, monoclinic, P2(1)/c, a = 13.129(1) A, b = 17.053(1) A, c = 15.711(1) A, beta = 90.876(5) degrees, V = 3517.3(4) A(3), and Z = 4.     

Nature of the chemical bond formed with the structural metal ion at the A9/G10.1 motif derived from hammerhead ribozymes

We have studied the interaction between metal ions and the metal ion-binding motif in hammerhead ribozymes, as well as the functions of the metal ion at the motif, with heteronuclear NMR spectroscopy. In this study, we employed model RNA systems which mimic the metal ion-binding motif and the altered motif. In Co(NH3)6(III) titrations, we observed large 1H and 31P chemical shift perturbations for the motif and found that outer-sphere complexation of Co(NH3)6(III) is possible for this motif. From the reinvestigation of our previous 15N chemical shift data for Cd(II) binding, in comparison with those of organometallic compounds, we conclude that Cd(II) can form an inner-sphere complex with the nucleobase in the motif. Therefore, the A9/G10.1 site was found to accept both inner-sphere and outer-sphere complexations. The Mg(II) titration for a slightly different motif from the A9/G10.1 site (G10.1-C11.1 to A10.1-U11.1) revealed that its affinity to Mg(II) was drastically reduced, although the ribozyme with this altered motif is known to retain enzymatic activities. This observation suggests that the metal ion at these motifs is not a catalytic center of hammerhead ribozymes.     

Optically active seleninate esters: isolation, absolute configuration, racemization mechanism, and transformation into chiral selenoxide

Optically active seleninate esters were obtained for the first time by chromatographic resolution on an optically active column. The absolute configurations of the optically active seleninate esters were determined by comparing their chiroptical properties with those of two analogous sulfinate esters, the absolute configuration of one of which is known and that of the other was determined by X-ray crystallographic analysis. The optically active seleninate esters were found to racemize in solution. Kinetic studies of the racemization, the oxygen exchange reaction with H(2)(18)O, and theoretical studies clarified that the racemization of the optically active seleninate esters in solution proceeded via an achiral hypervalent selenurane intermediate that was formed by the reaction with water. The reaction of the optically active seleninate ester and the sulfinate ester having bulky substituents with Grignard reagents was found to proceed with the retention of stereochemistry to give an optically active selenoxide and sulfoxides, respectively.     

Studies on the reaction N + N3 → N2(B 3Πg) + N2(X 1Σ+g)

Strongly enhanced N₂ first positive emission N₂(B ³Π_g → A ³Σ⁺_u) has been observed on addition of N atoms into a flowing mixture of Cl and HN₃. The dependence of the emission intensity on N atom concentration gave a rate constant for the reaction N + N₃ → N₂(B ³Π_g) + N₂(X ¹Σ⁺_g) of _i(1.6 ± 1.1) × 10^?11 cm³ molecule^?1 s^?1. That for the reaction Cl + HN₃ → HCl + N₃ is (8.9 ± 1.0) × 10^?13 cm³ molecule^?1 s^?1 from the decay of the emission. Comparison of the emission intensity in ClHN₃ with that in ClHN₃N gave the rate constant of the reaction N₃ + N₃ → N₂(B ³Π_g) + 2N₂(X ¹Σ⁺_g) as 1.4 × 10^?12 cm³ molecule^?1 s^?1 on the assumption that N + N₃ yields only N₂(B ³Π_g) + N₂(X ¹Σ⁺_g).     

Comparative study on inclusion complexations of antiinflammatory drug flurbiprofen with β-cyclodextrin and methylated β-cyclodextrins

Abstruct Some physicochemical properties of methylated -cyclodextrins, i.e., heptakis(2,6-di-O-methyl)--cyclodextrin (DM--CyD) and heptakis(2,3,6-tri-O-methyl)--cyclodextrin (TM--CyD) were compared with those of natural -cyclodextrin (-CyD). Inclusion behaviors of -CyD and methylated -CyDs in water and in solid state were studied by solubility analysis, spectroscopies (UV, CD,¹³C-NMR and IR), X-ray diffractometry and thermal analysis, using an antiinflammatory drug flurbiprofen (FP) as a guest molecule. The spectral data suggest that the inclusion mode of FP-TM--CyD is somewhat different from those of FP--CyD and FP-DM--CyD. The solid complexes of FP with - and methylated -CyDs were obtained in molar ratio of 11, and their dissolution behavior and release from suppository base were examined. The data are presented suggesting that DM--CyD is particularly useful for improving the pharmaceutical properties of FP in various dosage forms.     

Block catiomer polyplexes with regulated densities of charge and disulfide cross-linking directed to enhance gene expression

A block catiomer polyplex, showing a high stability in the extracellular medium and an efficient release of plasmid DNA (pDNA) in the intracellular compartment, was developed by controlling both the cationic charge and disulfide cross-linking densities of the backbone polycations. Poly(ethylene glycol)-poly(L-lysine) block copolymer (PEG-PLL) was thiolated using either of two thiolation reagents, N-succinimidyl 3-(2-pyridyldithio)propionate (SPDP) or 2-iminothiolane (Traut's reagent), to investigate the effects of both the charge and disulfide cross-linking densities on the properties of the polyplexes. The introduction of thiol groups by SPDP proceeded through the formation of amide linkages to concomitantly decrease the cationic charge density of PLL segment, whereas Traut's reagent promoted the thiolation with the introduction of cationic imino groups to keep the charge density constant. These thiolated PEG-PLLs were complexed with pDNA to form the disulfide cross-linked block catiomer polyplexes, which had the size of approximately 100 nm. Both thiolation methods were similarly effective in introducing disulfide cross-links to prevent the polyplex from the dissociation through a counter polyanion exchange in the extracellular oxidative condition. On the other hand, the efficient release of pDNA responding to the reductive condition mimicking the intracellular environment was only achieved for the polyplex thiolated with SPDP, a system compensating for the decrease in the charge density with the disulfide cross-linking. This distinctive sensitivity toward oxidative and reductive environments was nicely correlated with the remarkable difference in the transfection efficiency between these two types of thiolated polyplexes (SPDP and Traut's reagent types): the former revealed approximately 50 times higher transfection efficiency toward 293T cells than the latter. Obviously, the balance between the densities of the cationic charge and disulfide cross-linking in the thiolated polyplex played a crucial role in the delivery and controlled release of entrapped pDNA into the microenvironment of intracellular compartment to achieve the high transfection efficiency.     

Oligomer-immobilizing ability of an electrodeposited aramid resin film in the electrooxidation of aniline derivatives and the functions of the resulting films

An aramid resin, poly(p-phenylene terephthalamide) (PPTA), was electrodeposited on an indium-tin oxide electrode as a mechanically stable film from a dimethyl sulfoxide solution. Two aniline derivatives, o-phenylenediamine and o-aminophenol, were electrooxidized from H₂SO₄ aqueous solutions using the PPTA film-coated electrode. The PPTA film was permeable to the aniline derivatives, and the derivatives were electrooxidized on the electrode surface. When the derivatives were electrooxidized, the film immobilized the corresponding oligomer species as well as the polymers plain (o-phenylenediamine) (PoPD) and poly(o-aminophenol) (PoAP), and the deposited amount of the polymers was increased by the PPTA film. The immobilized amount of PoAP was greater than that of PoPD because of the 1,4-substituted structure of PoAP. In the PPTA film, both PoPD and PoAP were electronically stabilized, and they became durable against oxidative degradation.     

Ce(iv)-centered charge-neutral perovskite layers topochemically derived from anionic [CeTa2O7]− layers

Layered perovskites have been extensively investigated in many research fields, such as electronics, catalysis, optics, energy, and magnetics, because of the fascinating chemical properties that are generated by the specific structural features of perovskite frameworks. Furthermore, the interlayers of these structures can be chemically modified through ion exchange to form nanosheets. To further expand the modification of layered perovskites, we have demonstrated an advance in the new structural concept of layered perovskite “charge-neutral perovskite layers” by manipulating the perovskite layer itself. A charge-neutral perovskite layer in [Ce^IVTa₂O₇] was synthesized through a soft chemical oxidative reaction based on anionic [Ce^IIITa₂O₇]⁻ layers. The Ce oxidation state for the charge-neutral [Ce^IVTa₂O₇] layers was found to be tetravalent by X-ray absorption fine structure (XAFS) analysis. The atomic arrangements were determined through scattering transmission electron microscopy and extended XAFS (EXAFS) analysis. The framework structure was simulated through density functional theory (DFT) calculations, the results of which were in good agreement with those of the EXAFS spectra quantitative analysis. The anionic [Ce^IIITa₂O₇]⁻ layers exhibited optical absorption in the near infrared (NIR) region at approximately 1000 nm, whereas the level of NIR absorption decreased in the [Ce^IVTa₂O₇] charge-neutral layer due to the disappearance of the Ce 4f electrons. In addition, the chemical reactivity of the charge-neutral [Ce^IVTa₂O₇] layers was investigated by chemical reduction with ascorbic acid, resulting in the reduction of the [Ce^IVTa₂O₇] layers to form anionic [Ce^IIITa₂O₇]⁻ layers. Furthermore, the anionic [Ce^IIITa₂O₇]⁻ layers exhibited redox activity which the Ce in the perovskite unit can be electrochemically oxidized and reduced. The synthesis of the “charge-neutral” perovskite layer indicated that diverse features were generated by systematically tuning the electronic structure through the redox control of Ce; such diverse features have not been found in conventional layered perovskites. This study could demonstrate the potential for developing innovative, unique functional materials with perovskite structures.

This study proposed a new layer modification technique, “layer charge control”, for layered perovskites, and the structures of the obtained charge neutral [CeTa₂O₇] perovskite sheet were characterized theoretically and experimentally.