First synthesis of enantio-uracil dinucleotide, comparison of physicochemical properties of their enantiomers, and separation by chiral column chromatography

Enantio-uracil dinucleotide 5, which consists of two l-uridylic acids and one pyrophosphate, was synthesized for the first time in our laboratory. Benzolyated l-uridine was prepared by a stereoselective glycosylation of silylated uracil with l-1-O-acetyl-2,3,5-tri-O-benzoylribose (l-ABR 7). After deprotection, l-uridine 9 was converted to P¹,P⁴-di(l-uridine 5′-) tetraphosphate tetrasodium salt (l-UP₄U 5) by treatment of l-UMP morpholidate 10c with triethylammonium pyrophosphate (TEA-PPi 11b). Spectral data of synthesized l-UP₄U 5 are given in the references. All spectral data were identical with those of UP₄U 3 except the specific rotation, which showed a positive value compared to UP₄U 3 having a negative value. Furthermore, the separation by chiral column chromatography was investigated.     

2,2′-Isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand for asymmetric cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols

The oxidative cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols mediated by Pd(II) with chiral bisoxazoline (box ligand) afforded bicyclic-β-alkoxyacrylates. Based on a ligand screening, 2,2′-isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand has been developed. The products with a chiral quaternary carbon were obtained in 71-100% yields with 85-95% ee.     

Dioxo-molybdenum(VI) and mono-oxo-molybdenum(IV) complexes supported by new aliphatic dithiolene ligands: new models with weakened Mo=O bond characters for the arsenite oxidase active site

The cis-dioxo-molybdenum(VI) complexes, [MoO2(L(H))2]2- (1b), [MoO2(L(S))(2)]2- (2b), and [MoO2(L(O))2]2- (3b) (L(H) = cyclohexene-1,2-dithiolate, L(S) = 2,3-dihydro-2H-thiopyran-4,5-dithiolate, and L(O) = 2,3-dihydro-2H-pyran-4,5-dithiolate), with new aliphatic dithiolene ligands were prepared and investigated by infrared (IR) and UV-vis spectroscopic and electrochemical methods. The mono-oxo-molybdenum(IV) complexes, [MoO(L(H))2]2- (1a), [MoO(L(S))2]2- (2a), and [MoO(L(O))2]2- (3a), were further characterized by X-ray crystal structural determinations. The IR and resonance Raman spectroscopic studies suggested that these cis-dioxo molybdenum(VI) complexes (1b-3b) had weaker Mo=O bonds than the common Mo(VI)O2 complexes. Complexes 1b-3b also exhibited strong absorption bands in the visible regions assigned as charge-transfer bands from the dithiolene ligands to the cis-MoO2 cores. Because the oxygen atoms of the cis-Mo(VI)O2 cores are relatively nucleophilic, these complexes were unstable in protic solvents and protonation might occur to produce Mo(VI)O(OH), as observed with the oxidized state of arsenite oxidase.     

Hydrides with the perovskite structure: General bonding and stability considerations and the new representative CaNiH3

The stability and electronic structure of perovskite hydrides ABH₃ were investigated by means of first-principles density functional calculations. Two types of perovskite hydrides are distinguished: (1) When A and B are alkali and alkaline earth metals, the hydrides are ionic compounds with calculated band gaps of around 2 eV and higher. Their stability trend follows basically the concept of Goldschmidt's tolerance factor. (2) When A is one of the heavier alkaline earth metals (Ca, Sr, Ba) and B a transition metal, stable compounds ABH₃ result only when B is from the Fe, Co, or Ni groups. This stability trend is basically determined by effects associated with d band filling of both the transition metal and the hydride. In contrast to group (1) perovskites, the transition metal-containing compounds are metals. The synthesis of CaNiH₃ and its structure determination from CaNiD₃ is reported. This compound is a type (2) perovskite hydride with a fully occupied hydrogen position (CaNiD₃: a=3.551(4) Å, d_Ni-D=1.776(2) Å). Its stability is discussed with respect to transition metal hydrides with complex anions (e.g., Mg₂NiH₄, Na₂PdH₂, Sr₂PdH₄).     

Multilayer vesicles and vesicle clusters formed by the fullerene-based surfactant C60(CH3)5K

The self-assembly behavior of a fullerene-based surfactant, C60(CH3)5K, in water was studied using a combination of static and dynamic light scattering, as well as transmission electron microscopy, and compared to that of the compound C60(C6H5)5K. Both fullerene surfactant systems spontaneously assemble into large vesicles consisting of closed spherical shells formed by bilayers, with critical aggregation concentrations (CAC) lower than 10(-6) g ml(-1). At low concentrations, the aggregate sizes of C60(CH3)5K (radius R approximately 26.8 nm) and C60(C6H5)5K (R approximately 17.0 nm) were found to be substantially different from each other, showing that the change of the substituents surrounding the polar cyclopentadienide head group makes it possible to control the size of the resulting aggregates. Furthermore, the C60(CH3)5K vesicles were found to exist in two qualitatively different types of aggregation with a critical reaggregation concentration (CRC) located at 3.30 x 10(-6) g ml(-1). Above the CRC, larger aggregates were observed (R approximately 37.6 nm), showing a more complex form of supramolecular aggregation, e.g., in terms of multi-bilayer vesicles and/or of clusters of bilayer vesicles.     

Five- and Six-Coordinate 2-Methyl-2-propanethiolato Complexes of Zirconium(IV): Synthesis and Structures of [Li(DME)(3)][Zr(SCMe(3))(5)] and [(THF)Li](2)Zr(SCMe(3))(6)

Five-coordinate and six-coordinate 2-methyl-2-propanethiolato complexes of zirconium, [Li(DME)(3)][Zr(SCMe(3))(5)] (1) and [(THF)Li](2)Zr(SCMe(3))(6) (2), were obtained from the ZrCl(4)/LiSCMe(3) reaction system. The control of the Zr coordination number, by the ether ligands, THF or DME, bound to Li, is demonstrated by the conversion of 2 into 1 upon dissolution in DME. 1 and 2 were crystallographically characterized. The structures are extensively disordered. Crystal data follow: 1, hexagonal P6(3)/m, a = b = 12.496(3) ?, c = 17.561(9) ?, Z = 2, V = 2375(1) ?(3), R = 5.0%, R(w) = 6.8%; 2, trigonal R32, a = b = 11.813(3) ?, c = 28.37(1) ?, Z = 3, V = 3428(1) ?(3), R = 5.2%, R(w) = 6.4%.     

Application of Hot Press Sintering to Na2O-B2O3-SiO2 Gels Containing Quantum Dots for Lowering of Densification Temperature

Na₂O-B₂O₃-SiO₂ (NBS) gels containing a large amount of CdS quantum-dots (10 wt%) were densified using the hot press (HP) sintering method. By HP treatment, full-densification temperature could be lowered by about 40°C than that of the normal non-pressing (NP) heat treatment. Exciton absorption of CdS quantum-dots in HP-sample showed a large blue shift compared with that in the NP sample, and the size-distribution of CdS dots remained very sharp, with a mean particle diameter d = 3.66 nm and a standard deviation of = 0.72. HP pressure had a large effect on the reduction of sintering temperature and time, resulting in the suppression of the aggregation and growth of CdS quantum-dots in NBS glasses.     

Automated sample preparation using in-tube solid-phase microextraction and its application -- a review

Sample preparation, such as extraction, concentration, and isolation of analytes, greatly influences their reliable and accurate analysis. In-tube solid-phase microextraction (SPME) is a new effective sample preparation technique using an open tubular fused-silica capillary column as an extraction device. Organic compounds in aqueous samples are directly extracted and concentrated into the stationary phase of capillary columns by repeated draw/eject cycles of sample solution, and they can be directly transferred to the liquid chromatographic column. In-tube SPME is an ideal sample preparation technique because it is fast to operate, easy to automate, solvent-free, and inexpensive. On-line in-tube SPME-performed continuous extraction, concentration, desorption, and injection using an autosampler, is usually used in combination with high performance liquid chromatography and liquid chromatography-mass spectrometry. This technique has successfully been applied to the determination of various compounds such as pesticides, drugs, environmental pollutants, and food contaminants. In this review, an overview of the development of in-tube SPME technique and its applications to environmental, clinical, forensic, and food analyses are described.     

OBSERVATION OF THE PICOSECOND TIME-RESOLVED SPECTRUM OF SQUID BATHORHODOPSIN AT ROOM TEMPERATURE

Difference spectra between squid rhodopsin and its bathorhodopsin at room temperature were measured ca. 150 ps and ca. 500 ps after the excitation at 347.2 nm by a double-beam picosecond time-resolved spectrometer. The spectra measured showed a red shift of the isosbestic point between squid rhodopsin and its bathorhodopsin and a lower ΔA_max/ΔA_min value compared with those measured at low temperatures by conventional spectrophotometry.     

1H-NMR Relaxation of Water Molecules in the Aqueous Microcrystalline Cellulose Suspension Systems and Their Viscosity

An intensive study for aqueous microcrystalline cellulose (MCC) suspensions was carried out in view of the relationship between a viscosity and a 1H spin-spin relaxation time (T2) of water. An investigation was carried out for four suspension systems with the different particle size distributions. The proton mole ratio () of bound water against MCC particles and T2 of bound water (T2,b) were evaluated from the T2 values obtained by Carr-Purcell- Meiboom-Gill (C.P.M.G) method and those by solid echo method, respectively. As a result of these analyses, the T2,b value for the aqueous MCC suspension was evaluated as 5 × 10–3 s and it was found that the system having a larger tended to show a higher viscosity. By relating the above results to the observation of the suspensions by an optical microscope, it was concluded that a network formed by MCC particles plays an important role in generating a high viscosity of MCC suspension, and that an averaged mobility of water molecules is sensitively affected by the network structure.