Regioselective oxygenative tetraamination of [60]fullerene. Fullerene-mediated reduction of molecular oxygen by amine via ground state single electron transfer in dimethyl sulfoxide

The reaction of [60]fullerene with a variety of a secondary aliphatic amines in 20% v/v dimethyl sulfoxide in chlorobenzene under an atmospheric pressure of molecular oxygen allows regioselective introduction of four amino groups and one epoxide group around one pentagon of the fullerene molecule in good to high yield. This new synthesis of tetraaminofullerene expoxide can be carried out with a simple procedure on a multigram scale at room temperature and affords a variety of functionalized fullerene derivatives. Near-infrared analysis of a mixture of [60]fullerene and piperidine in a deaerated dimethyl sulfoxide/chlorobenzene mixture indicated equilibrium formation of [60]fullerene radical anion (C60*-) that persists at least for 2 weeks at room temperature but reacts immediately with molecular oxygen to give the tetraaminofullerene expoxide. The Benesi-Hildebrand analysis of the concentration dependency of the near-infrared absorption indicated that a [C60*- piperidine*+] radical ion pair is formed with an equivalent constant of K = 0.62 +/- 0.02 M(-1) at 25 degrees C. This and other lines of evidence suggest that the oxygenative amination reaction involves C60-mediated reduction of molecular oxygen by the amine.     

Electrophoretic mobility of a highly charged colloidal particle in a solution of general electrolytes.

For a highly charged particle in an electrolyte solution, counterions are condensed very near the particle surface. The electrochemical potential of counterions accumulated near the particle surface is thus not affected by the applied electric field, so that the condensed counterions do not contribute to the particle electrophoretic mobility. In the present paper we derive an expression for the electrophoretic mobility mu(infinity) of a highly charged spherical particle of radius a and zeta potential zeta in the limit of very high zeta in a solution of general electrolytes with large ka (where k is the Debye-Hückel parameter) on the basis of our previous theory for the case of symmetrical electrolytes (H. Ohshima, J. Colloid Interface Sci. 263 (2003) 337). It is shown that zeta can formally be expressed as the sum of two components: the co-ion component, zetaco-ion, and the counterion component, zetacounterion (where zeta = zetaco-ion + zetacounterion) and that the limiting electrophoretic mobility mu(infinity) is given by mu(infinity) = epsilonr epsilon0 zetaco-ion(infinity)/eta + 0(1/ka), where zetaco-ion(infinity) is the high zeta-limiting form of zetaco-ion, epsilonr and eta are, respectively, the relative permittivity and viscosity of the solution, and epsilon0 is the permittivity of a vacuum. That is, the particle behaves as if its zeta potential were zetaco-ion(infinity), independent of zeta. For the case of a positively charged particle in an aqueous electrolyte solution at 25 degrees C, the value of zetaco-ion(infinity) is 35.6 mV for 1-1 electrolytes, 46.0 mV for 2-1 electrolytes, and 12.2 mV for 1-2 electrolytes. It is also found that the magnitude of mu(infinity) increases as the valence of co-ions increases, whereas the magnitude of mu(infinity) decreases as the valence of counterions increases.     

Novel synthesis of 1,3-dienes from 1-alkenes via /ldene/rd reaction with pummerer rearrangement product: a short synthesis of the sex pheromone of the red bollworm moth

A Pummerer rearrangement product, 4-chlorophenylthiomethyl trifluoroacetate (6), obtained from 4-chlorophenyl methyl sulfoxide (5) and trifluoroacetic anhydride, reacted with 1-alkenes in trifluoroacetic acid to give the ene products 8, which were readily converted into the terminal 1,3-dienes 10 by oxidation and subsequent pyrolysis. Using this method, 9,11-dodecadien-1-yl acetate (12), a sex pheromone of the red bollworm moth, was synthesized.     

Depolymerization of poly(2,6-dimethyl-1,4-phenylene oxide) under oxidative conditions

Depolymerization of an engineering plastic, poly(2,6-dimethyl-1,4-phenylene oxide) (PPO), was accomplished by using 2,6-dimethylphenol (DMP) under oxidative conditions. The addition of an excess amount of DMP to a solution of PPO in the presence of a CuCl/pyridine catalyst yielded oligomeric products. When PPO (M(n)=1.0x10(4), M(w)/M(n)=1.2) was allowed to react with a sufficient amount of DMP, the molecular weight of the product decreased to M(n)=4.9x10(2) (M(w)/M(n)=1.5). By a prolonged reaction with the oxidant, the oligomeric product was repolymerized to produce PPO essentially identical to the starting material, making the oligomer useful as a reusable resource. During the depolymerization reaction, an intermediate phenoxyl radical was observed by ESR spectroscopy. Kinetic analysis showed that the rate of the oxidation of PPO was about 10 times higher than that of DMP. These results show that a monomeric phenoxyl radical attacks the polymeric phenoxyl to induce the redistribution via a quinone ketal intermediate, leading to the substantial decrease in the molecular weight of PPO, which is much faster than the chain growth.     

Indium-mediated beta-allylation,beta-propargylation,and beta-allenylation onto alpha,beta-unsaturated ketones: reactions of in-situ-generated 3-tert-butyldimethylsilyloxyalk-2-enylsulfonium salts with in-situ-generated organoindium reagents

3-tert-Butyldimethylsilyloxyalk-2-enylsulfonium salts, generated in situ from the reaction of alpha,beta-enones with dimethyl sulfide in the presence of TBSOTf, underwent a novel nucleophilic substitution with allylindiums to give silyl enol ethers of delta,epsilon-alkenyl ketones in good yields, which correspond to formal Michael addition products. In a similar manner, 1,4-propargylation of propargylindiums onto the sulfonium salts produced the corresponding silyl enol ethers of delta,epsilon-alkynyl ketones in good yields. Organoindium reagents derived from gamma-substituted propargyl bromide and indium afforded the corresponding silyl enol ethers of beta-allenyl ketones in good yields. The reaction proceeds via an addition-substitution mechanism involving the formation of allylic sulfonium salts. The presence of the intermediate sulfonium salt was confirmed by observation of the low-temperature (1)H NMR spectra.     

Colloid vibration potential and ion vibration potential in a dilute suspension of spherical colloidal particles

A general electroacoustic theory is presented for the macroscopic electric field in a dilute suspension of spherical colloidal particles in an electrolyte solution, which consists of the colloid vibration potential (CVP) and the ion vibration potential (IVP), induced by an oscillating pressure gradient field due to an applied sound wave. This is a unified theory that unites previous theories for CVP and those for IVP. Approximate analytic expressions are derived for CVP and IVP. The obtained IVP expression agrees with Debye's formula that is corrected by taking into account the force acting on the electrolyte ions as a result of the pressure gradient in the sound wave. The obtained CVP expression is correct to the first order of the particle zeta potential and applicable for arbitrary kappaalpha, where kappa is the Debye-Hückel parameter and alpha is the particle radius. It is found that an Onsager relation holds between CVP and dynamic electrophoretic mobility. It is also shown that the CVP from particles with very small kappaalpha approaches IVP; that is, in the limit of very small kappaalpha a particle behaves like an ion.     

Surface-potential reversibility of an amino-terminated self-assembled monolayer based on nanoprobe chemistry

Nanoprobe chemistry offers a promising approach for the construction of nanostructures consisting of organic molecules by employing the tip of a scanning probe microscope. In a previous report, we demonstrated that a nitroso-terminated surface on an organosilane self-assembled monolayer could be converted into an amino-terminated surface by applying such a nanoprobe electrochemical technique. This paper reports on surface-potential reversibility originating from a reversible chemical reaction between amino and nitroso groups. In addition, we demonstrate surface-potential memory based on this chemical reversibility. Amino-terminated SAMs were prepared from p-aminophenyl-trimethoxysilane through chemical vapor deposition. Surface potentials were acquired by Kelvin force microscopy. When scanning probe lithography was conducted with a gold tip at positive-bias voltages, the surface potential of the scanned area shifted dramatically in the negative direction. Scanning with negative-bias voltages led to positive shift in the surface potential of the scanned area. The surface potential could be recovered even after multiple scannings with positive and negative applied bias voltages. On the basis of this discovery, we also succeeded in demonstrating surface-potential memory via our nanoprobe electrochemical technique.     

Degradation of crosslinked unsaturated polyesters in sub-critical water

The degradation of unsaturated polyesters crosslinked with styrene was performed in sub-critical water (SCW) in the absence and presence of organic additives. The unsaturated polyesters were de-crosslinked by hydrolysis of ester chains to form polystyrene derivatives on SCW treatment at 300 °C. With an increase in treating time, carboxylic acid groups in the polystyrene derivatives were turned into carboxylic anhydride groups in SCW. The de-crosslinking rate was much enhanced on SCW treatment in the presence of hydroxy compounds with a long alkyl chain and alkylamines, while carboxylic acids, benzenesulfonate salts, and quaternary ammonium salts were ineffective even though they had a long alkyl chain. The degree of de-crosslinking was reduced in the presence of diamines and amino acids because re-crosslinking at both ends of the additive molecules proceeded.     

新型配位聚合物[Zn6（bta）4（2,2′-bipy）3]的合成、晶体结构和荧光性质

采用水热法合成了一种新的三维配位聚合物[Zn6(bta)4(2,2′-bipy)3](H3bta=1,3,5-苯三乙酸;2,2′-bipy=2,2′-二联吡啶),并通过X射线单晶结构分析、红外光谱、元素分析和热重分析对该配合物进行了表征.结构分析数据表明,该配合物属单斜晶系,Cc空间群,晶胞参数a=1·7714(4)nm,b=2·4391(5)nm,c=1·7120(3)nm,β=104·39(3)°,Z=4,V=7·165(2)nm3,Dc=1·722g/cm3,μ=2·065mm-1,F(000)=3768,R1=0·0645,wR2=0·1424.荧光光谱结果表明,配合物具有良好的荧光性质.     

Magnetic/Conducting Hybrid Compound Composed of 1-D Chain [Mn2Cl5(EtOH)]∞ and BEDT-TTF Stacking Layer

An assembled compound (BEDT-TTF)₂[Mn₂Cl₅(EtOH)] (1) consisting of two structural lattices of Mn(II)-Cl one-dimensional (1-D) chains and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) stacking layers was synthesized by electrochemical crystallization. Compound 1 crystallized in triclinic space group P-1 (#2) with a=13.1628(5) Å, b=20.3985(9) Å, c=7.4966(3) Å, α=98.3498(8)°, β=104.980(1)°, γ=74.602(2)°, V=1868.3(1) ų, and Z=2. The 1-D chains and the stacking layers are aligned along the c-axis of the unit cell. The 1-D chain is described as [Mn₂Cl₅(EtOH)]_∞⁻ in which two Mn(II) ions and four Cl⁻ ions form a ladder-like chain with Kagomé (cuboidal) sublattices, and the remaining Cl⁻ ion and an ethanol molecule cap the edge-positioned Mn(II) ions of the chains. The BEDT-TTF molecules are packed between the Mn-Cl chains (ac-plane), the intermolecular S·S contacts of which are approximately found in the range 3.440(2)-3.599(2) Å. The packing feature of BEDT-TTF molecules is very similar to that of (BEDT-TTF)₂ClO₄(TCE)_0.5 (TCE=1,1,2-trichloroethane) (J. Am. Chem. Soc., 105, 297 (1983)). Regarding the electronic state of each BEDT-TTF molecule, Raman spectroscopic analysis and ESR study revealed the presence of half-valence BEDT-TTF molecules (charge delocalization) in 1. Magnetic measurements clearly demonstrated that the paramagnetic spins on the 1-D chain [Mn₂Cl₅(EtOH)]_∞⁻ arrange antiferromagnetically in the low-temperature region. Additionally, 1 exhibits metallic conductivity in the temperature range 2.0-300 K (σ=21 S cm⁻¹ at 300 K and 1719 S cm⁻¹ at 2.0 K), due to the contribution of the stacked BEDT-TTFs. Consequently, these peculiarities that correspond to antiferromagnetic/metallic conductivity demonstrate the “bi-functionality” of 1.