Antiferromagnetic interaction achieved by a 3-D supramolecular CuII complex with pyrazino-fused TTF as the ligand, [CuCl2(BP-TTF)

The diffusion reaction of TBA2Cu(II)Cl4 (TBA = tetrabutylammonium) and a N-containing organic donor, BP-TTF [=bis(pyrazino)tetrathiafulvalene], yielded a 3-D supramolecular Cu complex, [CuCl2(BP-TTF)] (1). The magnetic measurement of 1 exhibits an antiferromagnetic interaction by fitting a Bonner-Fisher model from 2 to 300 K with S = 1/2 and J = -3.5 K between Cu(IotaIota) mediated by self-assembling donor columns.     

Structural scaffold of 18-crown-6 tetracarboxylic Acid for optical resolution of chiral amino acid: x-ray crystal analyses of complexes of D- and L-isomers of serine and glutamic acid

(+)-18-crown-6 tetracarboxylic acid (18C6H4) has been used as a chiral selector for D/L-amino acids in HPLC, where L-isomer is usually eluted prior to D-isomer, except for the case of serine. To clarify why serine exhibits the reverse order for the elusion, the chiral interactions of D- and L-serines with (+)-18C6H4 were investigated by the X-ray single crystal analyses, together with the case of D- and L-glutamic acids, which exhibit the usual elution order in HPLC. The backbone structures (amino, Calpha-H and carboxyl groups) of these four amino acids showed the nearly same interaction with (+)-18C6H4 despite their different chirality. In contrast, the hydroxyl group of L-serine side chain formed a hydrogen bond with the carboxyl group of (+)-18C6H4, whereas such a interaction was not formed for the side chain of D-serine and D- and L-glutamic acids. Thus, it was shown that the exception of D/L-serine from the first elution rule of L-isomer in HPLC is due to the presence and absence of a hydrogen bond formation of its side chain OH group.     

Synthesis and biological evaluation of allenic quinazolines using palladium-catalyzed hydride-transfer reaction

Allenic quinazolines 13a-h were designed as mimics of Tarceva, which is an epidermal growth factor receptor (EGFR) tyrosine kinase inhibitor, and synthesized from the corresponding 4-(iodoanilino)quinazolines or 4-(iodophenoxy)quinazolines with N,N-dicyclohexylprop-2-ynylamine by the Sonogashira coupling followed by palladium-catalyzed hydride-transfer reaction. Cell growth inhibition of 13a-h toward A431, Kato III, SKBR3, and HepG2 was examined. Among the compounds synthesized, 13a showed a similar cell growth inhibition to Tarceva. Moreover, 13d and 13h exhibited a specific growth inhibition toward Kato III cells (IC₅₀ = 12 and 4.7 μM, respectively), although a significant inhibition toward other three cell lines was not observed at a 100 μM concentration of compounds.     

Preparation of Porous Protein-Based Hydogel for Highly Sensitive Protein Chips

Summary: Protein chips are important tools for high-throughput analysis of biological events. We have developed a novel method to prepare a protein-based hydrogel, that is, a “Three-Dimensional Nano-structured Protein Hydrogel” (3-D NPH), which is composed of protein and polymer nano-particles. The 3-D NPH could be easily prepared by dispensing a protein and polymer mixture on a substrate. Surprisingly, gold particles conjugated with protein A diffused into the 3-D NPH which was made of mouse IgG through the pores. We have shown that the protein chips made with our 3-D NPH method has tremendously improved sensitivity in detecting protein-protein interactions compared with that of direct protein immobilization methods.     

“Molecular Rope Curtain” Type of Liquid Crystals Based on a Sliding Graft Copolymer Having Mobile PEG Side Chains

A sliding graft copolymer having a polyrotaxane main chain and side chains of polyethylene glycol with a molecular weight of 2000 (PEG2000) was found to be a novel “molecular rope curtain” type of liquid crystalline material, which displayed a smectic A mesophase between 51 °C and 250 °C without any rigid mesogenic moieties.     

Major factors involved in the inhibition of ultrasound-induced free radical production and cell killing by pre-sonication incubation or by high cell density

To identify the factors involved in the inhibition of ultrasound (US)-induced free radical production and cell killing by pre-sonication incubation or by high cell density, we used different densities of U937 cells, and with (up to 2 h) or without pre-sonication incubations, the cell suspensions were exposed to 1 MHz US (10% duty factor at 100 Hz pulse rate; intensities 0.1-0.5 W/cm(2) for 1 min). The intensity 0.3 W/cm(2) was used for cell killing experiments and 0.5 W/cm(2) for free radical experiments. Free radical production was determined by electron paramagnetic resonance (EPR)-spin trapping with DMPO while cell killing was determined by assays for lysis, loss of cell viability, apoptosis and necrosis. The results show that at higher cell densities, CO(2) in the medium rapidly increased, with shorter pre-sonication incubation required to attain complete inhibition of both free radical production and cell killing. Cell killing at 0.3 W/cm(2) and free radical production at 0.5 W/cm(2) were both inhibited at 10 million cells/ml without incubation, and at 2 million cells/ml incubated for 2 h before sonication. Level of CO(2) alone could not account for the inhibition; consumption of gases in the medium is also considered in the inhibitory effect of pre-sonication, while suppression of cavitational activities due to the "viscosity effect" is considered a more important factor in the inhibition by high cell density.     

Dispersions of image potential states on surfaces of clean graphite and lead phthalocyanine film

Dispersions of image potential states on a graphite surface (denoted IPS1) and on 1 monolayer (ML) film (denoted IPS2) of lead phthalocyanine (PbPc) are investigated by the micro-spot angle-resolved two-photon photoemission (micro-AR-2PPE) spectroscopy. On the graphite surface, whole dispersions of the two members of IPS1 (n = 1 and 2) are observed. The n = 1 IPS1 peak is weakly visible at energy higher than the vacuum level. The effective mass of an electron in the n = 1 IPS1 becomes slightly light at the high momentum region, suggesting the interaction between the IPS1 and the unoccupied σ-band of graphite. On the PbPc film, the IPS2 band forms a band gap and back-folds at the boundary of the Brillouin zone. A 1-dimensional Kronig-Penny model is used to reproduce the effective mass and the shift of binding energy.     

Bottom-up Synthesis and Thread-in-Bead Structures of Finite (n,0)-Zigzag Single-Wall Carbon Nanotubes

The last remaining synthetic target of finite single-wall carbon nanotube models, the zigzag nanotube, has been accomplished through bottom-up chemical synthesis. The zigzag nanotube was synthetically accessible without constructing long-sought yet elusive cyclacene structures but with a cycloarylene structure by devising its cutout positions. The persistent tubular shape was also perfected in this last model by cyclization of zigzag-shaped aromatic molecules with a synchronous topological arrangement. The crystal structure of this nanotube further revealed an entangled supramolecular assembly, which showed a novel way to align nanotube molecules by utilizing their open-end functional groups in a thread-in-bead molecular assembly.     

Polypyrrole-palladium nanocomposite coating of micrometer-sized polymer particles toward a recyclable catalyst

A range of near-monodisperse, multimicrometer-sized polymer particles has been coated with ultrathin overlayers of polypyrrole-palladium (PPy-Pd) nanocomposite by chemical oxidative polymerization of pyrrole using PdCl(2) as an oxidant in aqueous media. Good control over the targeted PPy-Pd nanocomposite loading is achieved for 5.2 μm diameter polystyrene (PS) particles, and PS particles of up to 84 μm diameter can also be efficiently coated with the PPy-Pd nanocomposite. The seed polymer particles and resulting composite particles were extensively characterized with respect to particle size and size distribution, morphology, surface/bulk chemical compositions, and conductivity. Laser diffraction studies of dilute aqueous suspensions indicate that the polymer particles disperse stably before and after nanocoating with the PPy-Pd nanocomposite. The Fourier transform infrared (FT-IR) spectrum of the PS particles coated with the PPy-Pd nanocomposite overlayer is dominated by the underlying particle, since this is the major component (>96% by mass). Thermogravimetric and elemental analysis indicated that PPy-Pd nanocomposite loadings were below 6 wt %. The conductivity of pressed pellets prepared with the nanocomposite-coated particles increased with a decrease of particle diameter because of higher PPy-Pd nanocomposite loading. "Flattened ball" morphologies were observed by scanning/transmission electron microscopy after extraction of the PS component from the composite particles, which confirmed a PS core and a PPy-Pd nanocomposite shell morphology. X-ray diffraction confirmed the production of elemental Pd and X-ray photoelectron spectroscopy studies indicated the existence of elemental Pd on the surface of the composite particles. Transmission electron microscopy confirmed that nanometer-sized Pd particles were distributed in the shell. Near-monodisperse poly(methyl methacrylate) particles with diameters ranging between 10 and 19 μm have been also successfully coated with PPy-Pd nanocomposite, and stable aqueous dispersions were obtained. The nanocomposite particles functioned as an efficient catalyst for the aerobic oxidative homocoupling reaction of 4-carboxyphenylboronic acid in aqueous media for the formation of carbon-carbon bonds. The composite particles sediment in a short time (相似文献