Synthesis of195mPt radiolabelled cis-diamminedichloroplatinum/II/ of high chemical and radiochemical purity using high performance liquid chromatography

An improved method is described for the synthesis of^195mPt-radiolabelled cis-diamminedichloroplatinum/II. An amount of 10 mg of 95% enriched¹⁹⁴Pt was irradiated for 75 h in the hydraulic conveyer of the KUR at a thermal neutron flux of approximately 8.15×10¹³ n.cm^–2.sec^–1 and the^195mPt-radiolabelled CDDP was purified using HPLC. The chemical yield is 61% its chemical purity is greater than 99.74% the radiochemical purity is nearly 100%, and the specific activity is 7.4×10⁶ Bq mg^–1 CDDP/200 Ci mg^–1 CDDP/.     

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract

     

NMR study on the photoresponsive DNA tethering an azobenzene. Assignment of the absolute configuration of two diastereomers and structure determination of their duplexes in the trans-form

Two diastereomers of a photoresponsive oligodeoxyribonucleotide tethering a trans-azobenzene, based on the chirality of the central carbon of a diol linker, were separated by reversed-phase HPLC. On the basis of 2D NMR analysis, absolute configurations of the diastereomers alpha and beta (tentatively designated from differences in their retention time) were determined as R- and S-forms, respectively. For both diastereomers, their NMR-determined duplex structure showed that trans-azobenzene intercalates between base pairs, because distinct NOEs were observed between the protons of azobenzene and those of the adjacent base pairs, such as with the imino protons and methyl protons of thymine. The melting temperatures of both duplexes were higher than that of the corresponding native duplex, which contained no azobenzene residue, due to the intercalated trans-azobenzene stabilizing the duplex by a stacking interaction. Between these two diastereomers, differences in T(m) were also found: the melting temperature of the R-form duplex (alpha-isomer) was higher than that of the S-form (beta-isomer). On the basis of the NMR-determined structure, this difference was attributed to the fact that the S-form (beta isomer) causes more stress forming the duplex than does the R-form (alpha isomer) due to disturbances of the right-hand helix.     

Metal-assisted stabilization and probing of collagenous triple helices

Collagen model peptides that contain 2,2'-bipyridyl (bpy) ligands were designed and synthesized. The thermal stability of the collagenous triple helix was increased by forming an Fe(II)(bpy-peptide)(3) complex. The chirality of the metal center was shifted to form right-handed Delta-isomers induced by the supercoiling of the peptide moiety. Moreover, the refolding rate of the triple helix was increased in the presence of Fe(II). This metal-coordinating system possesses potential to be used to stabilize the triple-helical conformation as well as to probe the folding status of collagen model peptides.     

First synthesis of enantio-uracil dinucleotide, comparison of physicochemical properties of their enantiomers, and separation by chiral column chromatography

Enantio-uracil dinucleotide 5, which consists of two l-uridylic acids and one pyrophosphate, was synthesized for the first time in our laboratory. Benzolyated l-uridine was prepared by a stereoselective glycosylation of silylated uracil with l-1-O-acetyl-2,3,5-tri-O-benzoylribose (l-ABR 7). After deprotection, l-uridine 9 was converted to P¹,P⁴-di(l-uridine 5′-) tetraphosphate tetrasodium salt (l-UP₄U 5) by treatment of l-UMP morpholidate 10c with triethylammonium pyrophosphate (TEA-PPi 11b). Spectral data of synthesized l-UP₄U 5 are given in the references. All spectral data were identical with those of UP₄U 3 except the specific rotation, which showed a positive value compared to UP₄U 3 having a negative value. Furthermore, the separation by chiral column chromatography was investigated.     

2,2′-Isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand for asymmetric cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols

The oxidative cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols mediated by Pd(II) with chiral bisoxazoline (box ligand) afforded bicyclic-β-alkoxyacrylates. Based on a ligand screening, 2,2′-isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand has been developed. The products with a chiral quaternary carbon were obtained in 71-100% yields with 85-95% ee.     

A synthesis, including asymmetric synthesis, of α-quaternary α-amino aldehydes from ketones and chloromethyl p-tolyl sulfoxide via sulfinylaziridines

Treatment of 1-chlorovinyl p-tolyl sulfoxides, prepared from ketones and chloromethyl p-tolyl sulfoxide, with N-lithio arylamines resulted in the formation of sulfinylaziridines in good to high yields. The sulfinylaziridines were treated with N-lithio aniline or N-lithio p-chloroaniline to afford α-quaternary α-amino aldehydes in good yields. From α-quaternary α-amino aldehydes, α-quaternary α-amino acid esters and β-quaternary β-amino alcohols were obtained. When optically active chloromethyl p-tolyl sulfoxide was used in this procedure, a method for the synthesis of optically active α-quaternary α-amino aldehydes was realized. The reaction mechanism, including asymmetric induction, for the formation of the sulfinylaziridines is described.     

Dioxo-molybdenum(VI) and mono-oxo-molybdenum(IV) complexes supported by new aliphatic dithiolene ligands: new models with weakened Mo=O bond characters for the arsenite oxidase active site

The cis-dioxo-molybdenum(VI) complexes, [MoO2(L(H))2]2- (1b), [MoO2(L(S))(2)]2- (2b), and [MoO2(L(O))2]2- (3b) (L(H) = cyclohexene-1,2-dithiolate, L(S) = 2,3-dihydro-2H-thiopyran-4,5-dithiolate, and L(O) = 2,3-dihydro-2H-pyran-4,5-dithiolate), with new aliphatic dithiolene ligands were prepared and investigated by infrared (IR) and UV-vis spectroscopic and electrochemical methods. The mono-oxo-molybdenum(IV) complexes, [MoO(L(H))2]2- (1a), [MoO(L(S))2]2- (2a), and [MoO(L(O))2]2- (3a), were further characterized by X-ray crystal structural determinations. The IR and resonance Raman spectroscopic studies suggested that these cis-dioxo molybdenum(VI) complexes (1b-3b) had weaker Mo=O bonds than the common Mo(VI)O2 complexes. Complexes 1b-3b also exhibited strong absorption bands in the visible regions assigned as charge-transfer bands from the dithiolene ligands to the cis-MoO2 cores. Because the oxygen atoms of the cis-Mo(VI)O2 cores are relatively nucleophilic, these complexes were unstable in protic solvents and protonation might occur to produce Mo(VI)O(OH), as observed with the oxidized state of arsenite oxidase.     

Hydrides with the perovskite structure: General bonding and stability considerations and the new representative CaNiH3

The stability and electronic structure of perovskite hydrides ABH₃ were investigated by means of first-principles density functional calculations. Two types of perovskite hydrides are distinguished: (1) When A and B are alkali and alkaline earth metals, the hydrides are ionic compounds with calculated band gaps of around 2 eV and higher. Their stability trend follows basically the concept of Goldschmidt's tolerance factor. (2) When A is one of the heavier alkaline earth metals (Ca, Sr, Ba) and B a transition metal, stable compounds ABH₃ result only when B is from the Fe, Co, or Ni groups. This stability trend is basically determined by effects associated with d band filling of both the transition metal and the hydride. In contrast to group (1) perovskites, the transition metal-containing compounds are metals. The synthesis of CaNiH₃ and its structure determination from CaNiD₃ is reported. This compound is a type (2) perovskite hydride with a fully occupied hydrogen position (CaNiD₃: a=3.551(4) Å, d_Ni-D=1.776(2) Å). Its stability is discussed with respect to transition metal hydrides with complex anions (e.g., Mg₂NiH₄, Na₂PdH₂, Sr₂PdH₄).     

Multilayer vesicles and vesicle clusters formed by the fullerene-based surfactant C60(CH3)5K

The self-assembly behavior of a fullerene-based surfactant, C60(CH3)5K, in water was studied using a combination of static and dynamic light scattering, as well as transmission electron microscopy, and compared to that of the compound C60(C6H5)5K. Both fullerene surfactant systems spontaneously assemble into large vesicles consisting of closed spherical shells formed by bilayers, with critical aggregation concentrations (CAC) lower than 10(-6) g ml(-1). At low concentrations, the aggregate sizes of C60(CH3)5K (radius R approximately 26.8 nm) and C60(C6H5)5K (R approximately 17.0 nm) were found to be substantially different from each other, showing that the change of the substituents surrounding the polar cyclopentadienide head group makes it possible to control the size of the resulting aggregates. Furthermore, the C60(CH3)5K vesicles were found to exist in two qualitatively different types of aggregation with a critical reaggregation concentration (CRC) located at 3.30 x 10(-6) g ml(-1). Above the CRC, larger aggregates were observed (R approximately 37.6 nm), showing a more complex form of supramolecular aggregation, e.g., in terms of multi-bilayer vesicles and/or of clusters of bilayer vesicles.