Penetrating view of nano-structures in Aleochara verna spermatheca and flagellum by hard X-ray microscopy

A penetrating view of the three-dimensional nanostructure of female spermatheca and male flagellum in the species Aleochara verna is obtained with 100-nm resolution using a hard X-ray microscope, which provides a fast noninvasive imaging technology for insect morphology. Through introducing Zernike phase contrast and heavy metal staining, images taken at 8 keV displayed sufficient contrast for observing nanoscale fine structures, such as the spermatheca cochleate duct and the subapex of the flagellum, which have some implications for the study of the sperm transfer process and genital evolution in insects. This work shows that both the spatial resolution and the contrast characteristic of hard X-ray microscopy are quite promising for insect morphology studies and, particularly, provide an attractive alternative to the destructive techniques used for investigating internal soft tissues.     

有距离辨识度的传声器阵列波束优化算法研究*

小尺度线性传声器阵列在便携式通信设备中具有潜在应用前景,其波束优化算法大多关注于抑制来自与声源不同方向的噪声,而不能有效地抑制与声源同方向的噪声。本文通过对几种典型波束优化策略进行改进,增加线性约束条件,使得阵列兼具方向和距离辨识度。论文对比了几种优化方法的波束性能,同时讨论了约束条件对波束旁瓣的影响,并提出了鲁棒性的优化方案。仿真结果显示,合理的优化策略和线性约束条件可以使阵列波束获得很好的聚焦性能。     

基于MSP430的直线导轨定位装置的设计与实现

直线导轨是数控技术的重要组成部件,它的精确程度非常重要。以MSP430单片机为核心,设计了一个直线导轨精确定位装置。此装置采用两相四线的ST57型步进电机和60CM的螺纹丝杆组成一个直线导轨组,选用M7128驱动器驱动步进电机,使用PWM波精确定位算法程序精确控制电机转速。MSP430的IO端口控制步进电机的正反转,使得步进电机带动螺纹丝杆转动,让滚动丝杠上的物体往复移动,并在电脑上显示当前位移值。试验证明,其定位精度为0.01cm,具有较高的可靠性和准确性,低成本,稳定性好。     

基于GaSe差频产生8～19μm可调中红外辐射

利用Nd:YAG激光器抽运内腔KTP光学参量振荡器,得到了输出为2μm附近的双波长,并在满足Ι类相位匹配条件下,在GaSe中共线差频产生8～19μm连续宽调谐调的中红外辐射.在8.76μm处脉冲最大能量达33.66μJ,峰值功率7.4kW,光子转换效率达4.43%左右.分析了影响能量转化效率的原因,提出了补偿走离的措施.     

新型永久光谱烧孔材料及机理研究

利用永久光谱烧孔(Persistent spectral hole burning(PSHB))可使光学信息存储密度提高三个数量级以上[1].这一重要应用前景激励科学家探索和寻求具有较高的非均匀(inhomogeneous)线宽与均匀(homogeneous)线宽之比(决定存储密度)和可擦除性(erasable)新型光谱烧孔材料.有机材料易于进行分子设计和组装,是较理想的光存储(optical storage)材料.     

CdS半导体纳米晶体高强度激发下光谱特性研究

CdS半导体微晶作为代表性介观材料(mesoscopic material)其光学吸收和发光与量子尺寸效应的关系已经得到广泛研究[1-4],发现随着CdS微晶尺寸减小,CdS本征吸收和发射带呈现显著蓝移.Rossetti等人[3]和Y.Wang等人[4]分别通过对溶胶、沸石、聚合物和玻璃中CdS纳米晶体的光致发光测量研究了发光来源以及发光与尺寸的关系,确定了两个宽带发光分别属于带隙发光(350-500nm)和表面态或缺陷发光(500-700nm).本文首次报道了利用溶胶凝胶方法制备的钠硼硅中纳米尺寸CdS晶体高激发功率条件下的发光光谱测量结果,观察到随激发功率增加发光光谱兰移和线宽明显宽化,讨论了其物理机制.     

Solitons and Fractal Kerr Response

Optical solitary waves that propagate in a Kerr medium exhibiting a power-law nonlocal response are studied analytically. The first-principles stability analysis based on quantum field theory shows that within the whole range of the exponent (the fractal dimension) the solitary wave can be stabilized.     

高能激光能量计溯源问题研究

由于高能激光能量计标定过程中没有标准的能量测量装置和标准的激光源,无法采用常规方法对其进行标校。提出了一种利用现有小能量计从低到高逐级多次传递不确定度的方法,以及一种利用能量等效原理对激光能量计进行标校的方法。不确定度传递法方法简单,但环节较多导致不确定度较大。等效标定法包括电标法和光标法,电标法对设计要求较高,但求解过程相对简单。光标法工程实现难度要低得多,但必须事先对灯组余热及热损失进行测算。等效法的三个条件与误差大小关系紧密,在结构设计中必须严格考虑,它是提高测量准确性的根本,其次要尽量减少不确定度传递的中间环节,最后需要对误差项进行科学分析和测定,在此基础上对这些项进行相应的修正和补偿。     

Preparation and Characterization of Isotactic Polypropylene Reinforced with Hydroxyapatite Nanorods

Isotactic polypropylene (PP) composites filled with hydroxyapatite nanorods (nHAs) were fabricated using a melt compounding process. The effects of nHA additions on the structure, thermal, and mechanical properties as well as bioactivity of PP were investigated. Wide-angle X-ray diffraction and differential scanning calorimetry results showed that PP crystallized exclusively in the α-form when adding nHAs. Dynamic mechanical analysis showed that nHAs enhanced the storage modulus of PP. Mechanical measurements showed that nHAs stiffened and reinforced PP but reduced its tensile ductility and impact strength considerably. Furthermore, the PP/nHA nanocomposites were found to exhibit excellent bioactivity upon immersion in a simulated body fluid solution. This was attributed to the formation of apatite mineral crystals on the nanocomposite surfaces as revealed by scanning electron microscopy and energy dispersive X-ray analysis.     

Optical testing of star sensor (II): Alignment of star sensor from off-line pictures taken in orbital test

Alignment error of an image sensor relative to the optical axis of a star sensor head and alignment errors between four heads were calculated from pictures taken in an orbital experiment. When comparing the image sensor alignment parameters in the orbital test and a ground test, both values matched well. By determining the relative relationship of the four heads using four pictures taken at the same moment in orbit and uploading the parameters to the star sensor system in orbit, the estimated attitude error was improved from 0.29 to 0.17°, though the accuracy was limited by the ±0.2° determination accuracy of the satellite itself. We estimated the attitude determination accuracy from separation angles between boresights of the four heads, calculated from pattern matching between downloaded pictures and a star catalogue. The estimated accuracy, in terms of potential optical performance, was 0.60 arcmin at 3σ, which is sufficient to satisfy the specification of 1 arcmin.