Analysis of ordered categorical data from repeated measurements assuming a quantitative latent variable

Summary The purpose of the present paper is to propose an analytical method for ordered categorical responses obtained from a repeated measurement/longitudinal experiment. The ordered categorical scale is assumed to be a manifestation of a latent quantitative variable. A linear model is assumed for location parameters of the underlying distributions. Weighted least square method is applied to parameter estimation and subsequent analysis. Two data sets are analyzed to show several aspects of analysis by the proposed model and to discuss comparative characteristics of analysis compared with earlier analysis. A mention is made for a computer software program for the proposed model.     

XAFS spectra from X-ray fluorescence Kβ line using conventional energy-discriminating detector

X-ray fluorescence spectra of copper (Cu) metal, copper monoxide (CuO), and potassium chromate (K₂CrO₄) were recorded as a function of incident X-ray energy near the Cu K-edge and chromium (Cr) K-edge, respectively, using a conventional silicon drift detector. The spectra contained components due to elastic, inelastic, and multiple scattering, in addition to the Kα and Kβ lines. Cu and Cr K-edge X-ray absorption fine structure (XAFS) spectra of Cu, CuO, and K₂CrO₄ were obtained by an intensity analysis of the Kα and Kβ lines. The intensity of the Kβ line for the different incident photon energies was obtained by numerically removing the additional scattering components using the MUSCAT program. These spectra exhibited a jump near the K absorption edges, which reproduced the spectral features obtained in transmission mode for both Cu, CuO, and K₂CrO₄. A chemical shift was also clearly identified in the X-ray absorption near edges structure using the X-ray fluorescence Kβ line. In addition, the Cr K-edge extended XAFS spectrum of K₂CrO₄ was clearly observed using the Cr Kβ fluorescent line. The XAFS measurements on the Kα and Kβ lines are possible, and they carry equally valuable information.     

Angle-resolved photoemission study of CoSi2 nanofilms grown on Si(111) substrates

We have carried out an angle-resolved photoemission study for CoSi₂ nanofilms grown on the Si(111)-7×7 substrates. The surface of CoSi₂(111) nanofilm changes from the bulk-truncated surface to the surface with additional Si-bilayer by annealing at higher temperature above 825 K. The angle-resolved photoemission spectra of the CoSi₂ nanofilm annealed at 853 K show the spectral features originated from the surface resonance state on the CoSi₂ surface terminated by Si-bilayer. From the detailed photoemission study, we discuss the surface electronic structure in CoSi₂(111) nanofilms grown on Si(111) substrates.     

Effect of Comatic Aberration on the Propagation Characteristics of Laguerre--Gaussian Beams

Seidel comatic aberration is an important cause of deformation for a Laguerre--Gaussian (LG) beam. In addition, mono-axial comatic aberration, whose phase modulation depends only on one transverse coordinate, is also an important cause of beam deformation. Deformation of an LG beam by such aberrations is analyzed through numerical simulation based on the angular spectrum method. It is also shown that for holographically generated LG beams quadratic spatial variation of grating pitch can produce seidel and mono-axial comatic aberrations. An example of an experimentally generated LG beam with mono-axial comatic aberration is reported.     

Preparation and characterization of single-phase SiC nanotubes and C-SiC coaxial nanotubes

Preparation conditions of single-phase SiC nanotubes and C-SiC coaxial nanotubes were investigated. The characterization of single-phase SiC nanotubes and C-SiC coaxial nanotubes were carried out. The SiC nanowires, which were made of the catenated SiC grains of 50–200 nm in diameter, were obtained in carbon nanotubes reacted at 1450 °C. The only C-SiC coaxial nanotubes were formed at 1300 °C. A few single-phase SiC nantoubes were synthesized at 1200 °C for 100 h. More than half number of nanotubes reacted at 1200 °C for 100 h were altered to single-phase SiC nantoubes by heat treatment of 600 °C for 1 h in air since the remained carbon was removed. The energy dispersive X-ray spectroscopy analysis revealed that the atomic ratio of Si to C in single-phase SiC nanotubes was almost 1; these single-phase SiC nanotubes consisted of near-stoichiometric SiC grains.     

Adsorption and structure of methyl mercaptoacetate on Cu(1 1 1) surface by XPS and NEXAFS spectroscopy

Methyl mercaptoacetate (MA) on Cu(1 1 1) surface was investigated using synchrotron radiation-based X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. MA adsorbs on the surface via thiolate formation and weak interaction of the carbonyl group with the surface. Two different adsorption states previously reported for methanethiolate and ethanethiolate were confirmed, besides atomic sulfur. NEXAFS measurements support gauche-type conformation of MA whose skeleton lies on the surface.     

Validity of retinal oxygen saturation analysis: Hyperspectral imaging in visible wavelength with fundus camera and liquid crystal wavelength tunable filter

The purpose of this paper was to investigate the feasibility of a newly developed hyperspectral fundus imaging camera with a liquid crystal tunable filter. The intensities of different wavelengths of light transmitted through an artery, vein, and the area surrounding these vessels and reflected out were measured, and the differential spectral absorptions were analyzed. Measurements were made from 16 normal eyes and from two artificial capillaries. The ratios of absorption (ROA) of arteries to veins from 500 to 580 nm (range 1) and from 600 to 720 nm (range 2) were calculated. For all eyes, the ROA_range1 was larger than ROA_range2. The ROA obtained from the artificial capillary filled with blood saturated with oxygen or nitrogen was similar to that of simulated data of oxy- and deoxyhemoglobin extinction rate. Most ROAs of human eyes were lower than those of the simulated data and the artificial capillaries. Oxygen saturation analysis by hyperspectral fundus imaging of retinal vessels were qualitatively in agreement with thein vitro analysis or simulated values. However, further improvements are necessary to evaluate the oxygen saturation quantitatively in the retinal blood vessels.     

Laser ablation synthesis of monodispersed magnetic alloy nanoparticles

Monodispersed CoPt alloy nanoparticles were synthesized by a pulsed laser ablation (PLA) technique coupled with a low-pressure operating differential mobility analyzer (LP-DMA). The CoPt alloy nanoparticles were generated by laser ablating a solid Co–Pt target. In CoPt alloy nanoparticles synthesized from a target with a Co composition of 75 at%, the nanoparticle surfaces were covered by an oxide layer and exhibited a core-shell structure. In contrast, no shell was observed in particles generated from a target with a Co:Pt ratio of 50:50 at%. According to an EDX analysis, the compositions of the individual nanoparticles were almost the same as that of the target material. Finally, the magnetic hysteresis loops of the CoPt alloy nanoparticles exhibited ferromagnetism.