Direct chiral resolution of tartaric acid by ion-pair capillary electrophoresis using an aqueous background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane as a chiral counterion

Chiral resolution of native DL-tartaric acid was achieved by ion-pair capillary electrophoresis (CE) using an aqueous-ethanol background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane (R-DACH) as a chiral counterion. Factors affecting chiral resolution and migration time of tartaric acid were studied. By increasing the viscosity of the background electrolyte and the ion-pair formation, using organic solvents with a lower relative dielectric constant, resulted in a longer migration time. The optimum conditions for both high resolution and short migration time of tartaric acid were found to be a mixture of 65% v/v ethanol and 35% v/v aqueous solution containing 30 mM R-DACH and 75 mM phosphoric acid (pH 5.1) with an applied voltage of -30 kV at 25 degrees C, using direct detection at 200 nm. By using this system, the resolution (Rs) of racemic tartaric acid was approximately 1. The electrophoretic patterns of tartaric and malic acids suggest that two carboxyl groups and two hydroxyl groups of tartaric acid are associated with the enantioseparation of tartaric acid by the proposed CE method.     

NMR study on the photoresponsive DNA tethering an azobenzene. Assignment of the absolute configuration of two diastereomers and structure determination of their duplexes in the trans-form

Two diastereomers of a photoresponsive oligodeoxyribonucleotide tethering a trans-azobenzene, based on the chirality of the central carbon of a diol linker, were separated by reversed-phase HPLC. On the basis of 2D NMR analysis, absolute configurations of the diastereomers alpha and beta (tentatively designated from differences in their retention time) were determined as R- and S-forms, respectively. For both diastereomers, their NMR-determined duplex structure showed that trans-azobenzene intercalates between base pairs, because distinct NOEs were observed between the protons of azobenzene and those of the adjacent base pairs, such as with the imino protons and methyl protons of thymine. The melting temperatures of both duplexes were higher than that of the corresponding native duplex, which contained no azobenzene residue, due to the intercalated trans-azobenzene stabilizing the duplex by a stacking interaction. Between these two diastereomers, differences in T(m) were also found: the melting temperature of the R-form duplex (alpha-isomer) was higher than that of the S-form (beta-isomer). On the basis of the NMR-determined structure, this difference was attributed to the fact that the S-form (beta isomer) causes more stress forming the duplex than does the R-form (alpha isomer) due to disturbances of the right-hand helix.     

Metal-assisted stabilization and probing of collagenous triple helices

Collagen model peptides that contain 2,2'-bipyridyl (bpy) ligands were designed and synthesized. The thermal stability of the collagenous triple helix was increased by forming an Fe(II)(bpy-peptide)(3) complex. The chirality of the metal center was shifted to form right-handed Delta-isomers induced by the supercoiling of the peptide moiety. Moreover, the refolding rate of the triple helix was increased in the presence of Fe(II). This metal-coordinating system possesses potential to be used to stabilize the triple-helical conformation as well as to probe the folding status of collagen model peptides.     

First synthesis of enantio-uracil dinucleotide, comparison of physicochemical properties of their enantiomers, and separation by chiral column chromatography

Enantio-uracil dinucleotide 5, which consists of two l-uridylic acids and one pyrophosphate, was synthesized for the first time in our laboratory. Benzolyated l-uridine was prepared by a stereoselective glycosylation of silylated uracil with l-1-O-acetyl-2,3,5-tri-O-benzoylribose (l-ABR 7). After deprotection, l-uridine 9 was converted to P¹,P⁴-di(l-uridine 5′-) tetraphosphate tetrasodium salt (l-UP₄U 5) by treatment of l-UMP morpholidate 10c with triethylammonium pyrophosphate (TEA-PPi 11b). Spectral data of synthesized l-UP₄U 5 are given in the references. All spectral data were identical with those of UP₄U 3 except the specific rotation, which showed a positive value compared to UP₄U 3 having a negative value. Furthermore, the separation by chiral column chromatography was investigated.     

2,2′-Isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand for asymmetric cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols

The oxidative cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols mediated by Pd(II) with chiral bisoxazoline (box ligand) afforded bicyclic-β-alkoxyacrylates. Based on a ligand screening, 2,2′-isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand has been developed. The products with a chiral quaternary carbon were obtained in 71-100% yields with 85-95% ee.     

Dioxo-molybdenum(VI) and mono-oxo-molybdenum(IV) complexes supported by new aliphatic dithiolene ligands: new models with weakened Mo=O bond characters for the arsenite oxidase active site

The cis-dioxo-molybdenum(VI) complexes, [MoO2(L(H))2]2- (1b), [MoO2(L(S))(2)]2- (2b), and [MoO2(L(O))2]2- (3b) (L(H) = cyclohexene-1,2-dithiolate, L(S) = 2,3-dihydro-2H-thiopyran-4,5-dithiolate, and L(O) = 2,3-dihydro-2H-pyran-4,5-dithiolate), with new aliphatic dithiolene ligands were prepared and investigated by infrared (IR) and UV-vis spectroscopic and electrochemical methods. The mono-oxo-molybdenum(IV) complexes, [MoO(L(H))2]2- (1a), [MoO(L(S))2]2- (2a), and [MoO(L(O))2]2- (3a), were further characterized by X-ray crystal structural determinations. The IR and resonance Raman spectroscopic studies suggested that these cis-dioxo molybdenum(VI) complexes (1b-3b) had weaker Mo=O bonds than the common Mo(VI)O2 complexes. Complexes 1b-3b also exhibited strong absorption bands in the visible regions assigned as charge-transfer bands from the dithiolene ligands to the cis-MoO2 cores. Because the oxygen atoms of the cis-Mo(VI)O2 cores are relatively nucleophilic, these complexes were unstable in protic solvents and protonation might occur to produce Mo(VI)O(OH), as observed with the oxidized state of arsenite oxidase.     

Effect of comonomer sorption on radiation-induced copolymer grafting onto polyethylene and EVA films in the vapor phase

Radiation-induced copolymer grafting of acenaphthylene and maleic anhydride onto polyethylene or EVA film in the vapor phase was carried out and the effect of comonomer sorption on the grafting was studied. When polyethylene film was used as a backbone polymer, the sorption of the binary monomers during the grafting increased linearly as the grafting reaction proceeded. The marked increase was probably caused by the formation of a grafted layer. Particularly, the sorption of maleic anhydride was brought about by the existence of a grafted layer. In grafting onto EVA film, the content of maleic anhddride in the grafted copolymer increased with the increasing content of vinyl acetate in EVA. Continuous measurements of sorption of the comonomers onto EVA and grafted EVA films were carried out by use of an electrobalance. The distinctive feature of the sorption was that the equilibrium sorption of acenaphthylene or maleic anhydride onto the grafted EVA film increased and the diffusion constants for both comonomers decreased markedly with increasing percentage of graft. The copolymer grafting was explained from these results by assuming that the monomer molecules are supplied to the propagating chain ends mostly through a sorbed state on the polymer film.     

Hydrides with the perovskite structure: General bonding and stability considerations and the new representative CaNiH3

The stability and electronic structure of perovskite hydrides ABH₃ were investigated by means of first-principles density functional calculations. Two types of perovskite hydrides are distinguished: (1) When A and B are alkali and alkaline earth metals, the hydrides are ionic compounds with calculated band gaps of around 2 eV and higher. Their stability trend follows basically the concept of Goldschmidt's tolerance factor. (2) When A is one of the heavier alkaline earth metals (Ca, Sr, Ba) and B a transition metal, stable compounds ABH₃ result only when B is from the Fe, Co, or Ni groups. This stability trend is basically determined by effects associated with d band filling of both the transition metal and the hydride. In contrast to group (1) perovskites, the transition metal-containing compounds are metals. The synthesis of CaNiH₃ and its structure determination from CaNiD₃ is reported. This compound is a type (2) perovskite hydride with a fully occupied hydrogen position (CaNiD₃: a=3.551(4) Å, d_Ni-D=1.776(2) Å). Its stability is discussed with respect to transition metal hydrides with complex anions (e.g., Mg₂NiH₄, Na₂PdH₂, Sr₂PdH₄).     

Multilayer vesicles and vesicle clusters formed by the fullerene-based surfactant C60(CH3)5K

The self-assembly behavior of a fullerene-based surfactant, C60(CH3)5K, in water was studied using a combination of static and dynamic light scattering, as well as transmission electron microscopy, and compared to that of the compound C60(C6H5)5K. Both fullerene surfactant systems spontaneously assemble into large vesicles consisting of closed spherical shells formed by bilayers, with critical aggregation concentrations (CAC) lower than 10(-6) g ml(-1). At low concentrations, the aggregate sizes of C60(CH3)5K (radius R approximately 26.8 nm) and C60(C6H5)5K (R approximately 17.0 nm) were found to be substantially different from each other, showing that the change of the substituents surrounding the polar cyclopentadienide head group makes it possible to control the size of the resulting aggregates. Furthermore, the C60(CH3)5K vesicles were found to exist in two qualitatively different types of aggregation with a critical reaggregation concentration (CRC) located at 3.30 x 10(-6) g ml(-1). Above the CRC, larger aggregates were observed (R approximately 37.6 nm), showing a more complex form of supramolecular aggregation, e.g., in terms of multi-bilayer vesicles and/or of clusters of bilayer vesicles.     

Five- and Six-Coordinate 2-Methyl-2-propanethiolato Complexes of Zirconium(IV): Synthesis and Structures of [Li(DME)(3)][Zr(SCMe(3))(5)] and [(THF)Li](2)Zr(SCMe(3))(6)

Five-coordinate and six-coordinate 2-methyl-2-propanethiolato complexes of zirconium, [Li(DME)(3)][Zr(SCMe(3))(5)] (1) and [(THF)Li](2)Zr(SCMe(3))(6) (2), were obtained from the ZrCl(4)/LiSCMe(3) reaction system. The control of the Zr coordination number, by the ether ligands, THF or DME, bound to Li, is demonstrated by the conversion of 2 into 1 upon dissolution in DME. 1 and 2 were crystallographically characterized. The structures are extensively disordered. Crystal data follow: 1, hexagonal P6(3)/m, a = b = 12.496(3) ?, c = 17.561(9) ?, Z = 2, V = 2375(1) ?(3), R = 5.0%, R(w) = 6.8%; 2, trigonal R32, a = b = 11.813(3) ?, c = 28.37(1) ?, Z = 3, V = 3428(1) ?(3), R = 5.2%, R(w) = 6.4%.