Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

Relationship between apparent diffusion coefficient and signal intensity in endometrial and other pelvic cysts

We evaluated whether apparent diffusion coefficient (ADC) value is more useful than signal intensity for differentiating endometrial cysts from other pelvic cysts. In an in vitro study, signal intensity and diffusion coefficients were measured in whole blood phantoms in which blood oxidation was gradually increased and concentration subsequently diluted. Although both signal intensity and diffusion value were largely affected by blood concentration, diffusion value was almost independent of blood oxidation and red blood cell lysis-related diminution of magnetic nonhomogeneity, both factors greatly affecting signal intensity on T1- and T2-weighted images. In an in vivo study, differentiation between endometrial and other pelvic cysts was attempted by means of ADC values and signal ratios of cysts to muscles on T1- and T2-weighted images (T1- and T2-ratios). Endometrial cysts tended to show lower T2-ratios, higher T1-ratios, and lower ADC values than other pelvic cysts (p < 0.001). However, ADC values were not correlated with T1- and T2-ratios (p < /0.15/). The ability of ADC value to discriminate between these two groups (discriminant rate, 91.4%) was higher than that of T2-ratio (71.4%) or T1-ratio (88.6%). If combined, ADC and T1-ratio (or T2-ratio) showed higher discriminant rate (94.3%) than the combination of T1- and T2 ratios (88.6%). ADC value might be useful for evaluating the blood concentration of a cystic lesion, because diffusion value is more closely related to blood concentration and almost independent of blood oxidation and red blood cell lysis that largely affect signal intensity.     

Translational medicine of the glutamate AMPA receptor

Psychiatric and neurological disorders severely hamper patient’s quality of life. Despite their high unmet needs, the development of diagnostics and therapeutics has only made slow progress. This is due to limited evidence on the biological basis of these disorders in humans. Synapses are essential structural units of neurotransmission, and neuropsychiatric disorders are considered as “synapse diseases”. Thus, a translational approach with synaptic physiology is crucial to tackle these disorders. Among a variety of synapses, excitatory glutamatergic synapses play central roles in neuronal functions. The glutamate α-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid receptor (AMPAR) is a principal component of glutamatergic neurotransmission; therefore, it is considered to be a promising translational target. Here, we review the limitations of current diagnostics and therapeutics of neuropsychiatric disorders and advocate the urgent need for the promotion of translational medicine based on the synaptic physiology of AMPAR. Furthermore, we introduce our recent translational approach to these disorders by targeting at AMPARs.     

Effect of melt viscosity and surface tension of polymers on the percolation threshold of conductive-particle-filled polymeric composites

The electrical conductivities of carbon-black-filled low-density polyethylene (LDPE), poly(methyl methacrylate) (PMMA), and poly(vinyl chloride)-vinyl acetate (PVC/ VAc) copolymer were measured as functions of carbon content and melt viscosity of the matrix at the temperatures at which the composites were prepared. Sharp breaks in the relationship between the carbon filler content and the conductivity of composites were observed in all specimens at some content of the carbon filler. The conductivity jumps as much as 10 orders of magnitude at the break point. This phenomenon has been known as the “percolation threshold”. The critical carbon content corresponding to the break point     

Effect of solute atoms on grain boundary sliding in magnesium alloys

The effect of solid-solution alloying on grain boundary sliding (GBS) was investigated using pure magnesium and six kinds of Mg–X (X?=?Ag, Al, Li, Pb, Y and Zn) dilute binary solid solutions with an average grain size of 10?µm. A sharp increase in damping capacity caused by GBS was observed above a certain temperature. The temperature at which a sharp increase in damping capacity occurred depended on the alloying element. The addition of Y and Ag markedly increased the onset temperature (more than 100?K) for a sharp increase in damping capacity, whereas the addition of Zn, Al and Li slightly increased the onset temperature (less than 50?K) as compared with that for pure magnesium. Tensile tests at a temperature of 423?K revealed that the higher the onset temperature, the lower the strain rate sensitivity of the flow stress. It is suggested that the former elements (Y and Ag) are more effective in suppressing GBS in magnesium alloys than the latter ones (Zn, Al and Li). The suppression of GBS was associated with low grain boundary energy, and the extent to which the energy is reduced depended on the alloying element. It was suggested that the change in the lattice parameter (the so-called c/a ratio) affects the grain boundary energy, and thus, the occurrence of GBS.     

XAFS spectra from X-ray fluorescence Kβ line using conventional energy-discriminating detector

X-ray fluorescence spectra of copper (Cu) metal, copper monoxide (CuO), and potassium chromate (K₂CrO₄) were recorded as a function of incident X-ray energy near the Cu K-edge and chromium (Cr) K-edge, respectively, using a conventional silicon drift detector. The spectra contained components due to elastic, inelastic, and multiple scattering, in addition to the Kα and Kβ lines. Cu and Cr K-edge X-ray absorption fine structure (XAFS) spectra of Cu, CuO, and K₂CrO₄ were obtained by an intensity analysis of the Kα and Kβ lines. The intensity of the Kβ line for the different incident photon energies was obtained by numerically removing the additional scattering components using the MUSCAT program. These spectra exhibited a jump near the K absorption edges, which reproduced the spectral features obtained in transmission mode for both Cu, CuO, and K₂CrO₄. A chemical shift was also clearly identified in the X-ray absorption near edges structure using the X-ray fluorescence Kβ line. In addition, the Cr K-edge extended XAFS spectrum of K₂CrO₄ was clearly observed using the Cr Kβ fluorescent line. The XAFS measurements on the Kα and Kβ lines are possible, and they carry equally valuable information.     

Analysis of ordered categorical data from repeated measurements assuming a quantitative latent variable

Summary The purpose of the present paper is to propose an analytical method for ordered categorical responses obtained from a repeated measurement/longitudinal experiment. The ordered categorical scale is assumed to be a manifestation of a latent quantitative variable. A linear model is assumed for location parameters of the underlying distributions. Weighted least square method is applied to parameter estimation and subsequent analysis. Two data sets are analyzed to show several aspects of analysis by the proposed model and to discuss comparative characteristics of analysis compared with earlier analysis. A mention is made for a computer software program for the proposed model.     

Laser ablation synthesis of monodispersed magnetic alloy nanoparticles

Monodispersed CoPt alloy nanoparticles were synthesized by a pulsed laser ablation (PLA) technique coupled with a low-pressure operating differential mobility analyzer (LP-DMA). The CoPt alloy nanoparticles were generated by laser ablating a solid Co–Pt target. In CoPt alloy nanoparticles synthesized from a target with a Co composition of 75 at%, the nanoparticle surfaces were covered by an oxide layer and exhibited a core-shell structure. In contrast, no shell was observed in particles generated from a target with a Co:Pt ratio of 50:50 at%. According to an EDX analysis, the compositions of the individual nanoparticles were almost the same as that of the target material. Finally, the magnetic hysteresis loops of the CoPt alloy nanoparticles exhibited ferromagnetism.     

Landau levels in a novel two-dimensional electron system interacting with charged quantum dots

Landau levels have been theoretically investigated in a two-dimensional electron gas near a quantum dot (QD) layer. By a diagrammatical method, we have formulated the self-energy for the Landau level and deduced its relation to the AC conductivity σ_loc(ω) in the QD layer. As an example, we have examined the density of states in the case where σ_loc(ω) is described by Aω^S(S=0.8). It is found that the Landau levels are broadened due to the interaction with the localized electrons in the QDs.     

Simultaneous observation of CO isotopomer absorption by broadband difference-frequency generation using a direct-bonded quasi-phase-matched LiNbO3 waveguide

Rovibration absorption lines both of 12CO and 13CO are observed simultaneously with the output of a 2 microm broadband difference frequency generated in a direct-bonded quasi-phase-matched LiNbO3 waveguide, which is a 50 mm device with a single quasi-phase-matching period that is operated at a constant temperature. The wavelength conversion efficiency and the difference-frequency generation bandwidth reach 100%/W and 100 nm, respectively. The idler output bandwidth in the 2 microm region is obtained by group-velocity matching or phase-mismatch minimization when a 0.94 microm pump laser diode and a 1.55 microm tunable signal source are used.