Hydrides with the perovskite structure: General bonding and stability considerations and the new representative CaNiH3

The stability and electronic structure of perovskite hydrides ABH₃ were investigated by means of first-principles density functional calculations. Two types of perovskite hydrides are distinguished: (1) When A and B are alkali and alkaline earth metals, the hydrides are ionic compounds with calculated band gaps of around 2 eV and higher. Their stability trend follows basically the concept of Goldschmidt's tolerance factor. (2) When A is one of the heavier alkaline earth metals (Ca, Sr, Ba) and B a transition metal, stable compounds ABH₃ result only when B is from the Fe, Co, or Ni groups. This stability trend is basically determined by effects associated with d band filling of both the transition metal and the hydride. In contrast to group (1) perovskites, the transition metal-containing compounds are metals. The synthesis of CaNiH₃ and its structure determination from CaNiD₃ is reported. This compound is a type (2) perovskite hydride with a fully occupied hydrogen position (CaNiD₃: a=3.551(4) Å, d_Ni-D=1.776(2) Å). Its stability is discussed with respect to transition metal hydrides with complex anions (e.g., Mg₂NiH₄, Na₂PdH₂, Sr₂PdH₄).     

Theoretical study on spin alignments in ferromagnetic heterospin chains with competing exchange interactions: a generalized ferrimagnetic system containing organic biradicals in the singlet ground state

Spin alignments in heterospin chains are examined from numerical calculations of model spin Hamiltonians. The Hamiltonians of the heterospin chains mimic an open-shell molecular assemblage composed of an organic biradical in a singlet (S = 0) ground state and a doublet (S = 1/2) monoradical, which are coupled by intermolecular ferromagnetic exchange interactions. It is found from numerical calculations of the spin Hamiltonians that the spin value S2 of the ground-state singlet biradical embedded in the exchange-coupled assemblage deviates from zero and contributes to the bulk magnetization. The alternating chain is found to have two kinds of ground spin states, a high- and a low-spin state. All the spins are parallel to each other in the high-spin state, which is characterized by the spin correlation function of (S(i).S(j)) = 0.25. On the other hand, the spin alignment in the low-spin state is found to be dependent on the topology of the intermolecular exchange interactions. The energy preference of the two states depends on the relative amplitude of the exchange interactions in the chain. The intermolecular ferromagnetic couplings are competing in the ground-state singlet biradical with the intramolecular antiferromagnetic interaction. The appearance of the two kinds of ground states is attributed to a quantum spin frustration effect inherent in the triangular motif of the competing interactions. Magnetic properties of a zigzag chain complex composed of a nitronyl nitroxide biradical with a singlet ground state and Cu(hfac)2 are examined on the basis of the theoretical calculations. The vanishing magnetic moments, or the product of susceptibility and temperature chiT, at low temperatures observed for the complex are consistent with those of the low-spin state predicted in the theoretical calculations.     

Low-capacity cation-exchange chromatography of ultraviolet-absorbing urinary basic metabolites using a reversed-phase column coated with hexadecylsulfonate

A low-capacity cation-exchange HPLC method for the determination of UV-absorbing organic cations such as amino acids, histidine dipeptides, and creatinine was developed. A commercially available reversed-phase column was dynamically coated with hexadecylsulfonate, and was successfully used for the cation-exchange separation with ethylenediammonium eluting ion at pH 2.5. The coated column was enough stable for the specific use with a completely aqueous mobile phase at low and constant pH; and the day-to-day reproducibility for retention time was 0.9-1.7% of RSD (relative standard deviation). The linear relation between concentrations and detector responses (area) by using a photodiode-array UV detection at 210 nm ranged from 0.2 to 1000 microM (sample size 50 microl) for 1-methylhistidine, 3-methylhistidine, histidine, creatinine, anserine, carnosine, and homocarnosine, and from 0.5 to 2000 microM for creatine, tyrosine, and phenylalanine, with less than 5% of RSD. The UV spectrum (190-300 nm) obtained during chromatography was very indicative for each analyte. Overall recoveries were 97-104%. The developed HPLC method in conjunction with preliminary fractionation technique could be applied to the analysis of urine of patient with metabolic disorder such as phenylketonuria.     

Fluorescent Molecular Recognition and Sensing System of Bis-Dansyl Modified γ-Cyclodextrins

Flexible hosts, 6A,6B-; 6A,6C-; 6A,6D-; and 6A,6E-bis dansylglycine-modified -cyclodextrins (-1, -2, -3, and -4, respectively) have been synthesized as a sensing molecule for organic guests including terpenoids and bile acids. These host compounds show a pure monomer fluorescence whose intensity is decreased or enhanced upon addition of guest species. The value I/I₀, where I and I₀ are fluorescence intensities in the presence and absence of a guest and I is I₀- I, was used as a parameter of sensitivity. These hosts exhibit highly sensitive and selective molecular recognition ability, particularly, for lithochoic acid, chenodeoxycholic acid, and ursodeoxycholic acid. The behaviors of the appended moieties of these hosts when host–guest complexation occurs are studied by induced circular dichroism (ICD) spectra and fluorescence spectral change on accommodation of a guest. The ICD pattern of these hosts alone or on accommodation of a guest is very similar, indicating that the behavior of the appended moieties are very similar. The guest-induced variations in the fluorescence or ICD intensity suggest that the appended moieties act as a hydrophobic cap that enables the cyclodextrin to form 1 : 1 host–guest complexes.     

Extraction-spectrophotometric determination of germanium(IV) with mandelic acid and malachite green

A method has been developed for determination of germanium, based on complexation with mandelic acid and extraction of the ion-associate formed with Malachite Green (MG) into chlorobenzene. A weakly acidic aqueous solution (pH 2.5-3.5) at room temperature is used and indirect determination is achieved by measuring the absorbance of MG in the extract, at 628 mn. The calibration graph is linear over the range (0.17-8.63) x 10(-6) (0.05-2.50 mug of germanium); the apparent molar absorptivity is 1.33 x 10(5) 1.mole(-1).cm(-1). The interferences from Fe, Ti, Sn(IV), Mo, and SB(III) can be eliminated by addition of trans-1,2-diaminocyclohexanetetra-acetic acid and sodium diethyldithiocarbamate.     

Thermal decomposition of the solvent-extracted chloro complexes of vanadium(IV) with trioctylamine and trioctylmethylammonium chloride

The complexes (R₃NHVO(OH)Cl₂)₂ and (R₃RNVO(OH)Cl₂)₂ prepared by drying in vacuo the organic solutions from the extraction into benzene of aqueous vanadyl chloride solution with trioctylamine (TOA, R₃N) and trioctylmethylammonium chloride (TOMAC, R₃RNCl), were studied by thermogravimetry and differential thermal analysis under an atmosphere of nitrogen, and the products of their thermal decomposition, such as volatile matter and residues, by gas chromatography. X-ray diffraction and infrared spectroscopy. It was found that the complexes with TOA and TOMAC thermally decompose to V₂O₃ at 200–300° by cracking of the compounds R₃NHVO(OH)Cl₂ and R₃RNVO(OH)Cl₂ formed via dissociation of the complexes at about 150°.

---

Zusammenfassung Die Komplexe (R₃NHVO(OH)Cl₂)₂ und (R₃RNVO(OH)Cl₂)₂ wurden hergestellt, indem benzolische und wässrige Vanadylchlorid-Lösungen mit Trioctylamin (TOA, R₃N) und Trioctylmethylammoniumchlorid (TOMAC, R₃RNCl) extrahiert und die erhaltenen Lösungen im Vakuum eingedampft wurden. Die Komplexen wurden in Stickstoffatmosphäre mittels TG und DTA untersucht und die thermischen Zersetzungsprodukte, und zwar sowohl die flüchtigen Verbindungen als auch die Rückstände, gaschromatographisch bzw. röntgendiffraktometrisch und IR-spektroskopisch bestimmt. Es wurde festgestellt, daß die Komplexe mit TOA und TOMAC bei 150° in die Verbindungen R₃NHVO(OH)Cl₂ und R₃RNVO(OH)Cl₂ dissoziieren, die bei 200–300° thermisch zu V₂O₃ zersetzt werden.

---

(R₃NHVO(OH)Cl₂)₂ (R₃RNVO(OH)Cl₂)₂ (R₃,) ( , R₃RNCl). , , . , 200–300° V₂₃ R₃NV()l₂ R₃RNVO(OH)Cl₂, 150°.

---

---

We wish to thank the Koei Chemical Co. Ltd. for samples of TOA and TOMAC.     

Photoinduced Molecular Transformations. Part 142. One-step syntheses of 1H-benz[f]indole-4,9-diones and 1H-indole-4,7-diones by a new regioselective photoaddition of 2-amino-1,4-naphthoquinones and 2-amino-1,4-benzoquinones with alkenes

The 2,3-dihydro-1H-benz[f]indole-4,9-diones 3a–d , h were formed in a one-step reaction in 13–82% yield by an unprecedented [3 + 2] regioselective photoaddition of 2-amino-1,4-naphthoquinone ( 1 ) with various electronrich alkenes 2 (Scheme 1, Table). The [3 + 2] photoadducts derived from 1 with vinyl ethers and vinyl acetate gave 1H-benz[f]indole-4,9-diones 4e , f , i , in 33–72% yield, by spontaneous loss of the corresponding alcohol or AcOH from the resulting adducts; 4i has a kinamycin skeleton. The [3 + 2] photoaddition also took place on irradiation of the differently substituted amino-1,4-benzoquinones 6 , 7 , and 12 and excess alkenes 2 in benzene, giving 1H-indole-4,7-dione derivatives 13 and 14 (Scheme 3), 15a and 16 (Scheme 4), and 18 (Scheme 4), respectively. The initial products in these photoadditions were proved to be hydroquinones, the air oxidation of which yielded the heterocyclic quinones; 2,3-dihydro-2-methoxy-2-methyl-5-phenyl-1H-indole-1,4,7-triyl triacetate ( 19 ) was isolated after treatment of the crude photoaddition mixture obtained from 2-amino-5-phenyl-1,4-benzoquinone ( 7 ) and 2-methoxyprop-1-ene ( 2f ) with Ac₂O and pyridine under N₂. A pathway leading to the annelated hydroquinones involving ionic intermediates arising from an electron transfer in these photoadditions is proposed (Scheme 5).     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

Facile syntheses of 3-spiro- and 3,6-bridged 2,5-piperazinediones

The intramolecular addition of hydroxyl group of 3-(3-hydroxyl)propylidene-2,5-piperazinedione to 3-position and the same substitution of 3-(3-hydroxy)propyl derivative to 6-position gave the corresponding 3-spiro- and 3,6-bridged 2,5-piperazinediones, respectively.