Determination of spinosad in vegetables and fruits by high-performance liquid chromatography with UV and mass spectrometric detection after gel permeation chromatography and solid-phase extraction cleanup on a 2-layered column

A simple and reliable method was developed for the determination of spinosyns A and D, the active ingredients of spinosad, in vegetables and fruits, by high-performance liquid chromatography with UV detection (HPLC-UV) and confirmation by mass spectrometry (MS); the method uses selected gel permeation chromatography (GPC) and a 2-layered column for solid-phase extraction system. An aliquot of the crude sample extract obtained by acetonitrile extraction is loaded into the GPC system. The fraction containing spinosyns A and D is selectively collected and loaded directly onto a 2-layered column consisting of graphitized carbon (upper layer) and cyclohexyl-bonded silica gel (lower layer). After the column is washed with the GPC mobile phase acetone-cyclohexane (3 + 7), the column is eluted with acetonitrile containing 2% triethylamine. The eluate is used for HPLC-UV/MS analysis. Average recoveries from fortified cabbage, green perilla, fig, and strawberry at analyte concentrations of 0.05 and 0.25 microg/g were >85%, and the relative standard deviations were <9%. The detection limits for spinosyns A and D in green perilla were 0.005 microg/g by UV detection and 0.001 microg/g by MS detection.     

Novel catalytic oxidative coupling reaction of N,N-dimethyl-p-phenylenediamine with 1,3-phenylenediamine and its applications to the determination of copper and iron at trace levels by flow injection technique

A new catalytic oxidative coupling reaction of N,N-dimethyl-p-phenylenediamine (DPD) with 1,3-phenylenediamine (mPD) in the presence of hydrogen peroxide has been developed for trace metals analysis. The rate of the oxidation/coupling reaction can be enhanced significantly by iron, copper and cobalt. These metal ions can catalyze the oxidation reaction of DPD to form an oxidized product; the oxidized DPD was then coupled with mPD to give a blue-colored product which was measured spectrophotometrically at 650 nm. On the basis of such a reaction scheme, two simple flow injection analysis methods for the determination of copper and iron have been developed. Detailed studies on chemical and FIA variables affecting the sensitivity of the detection were carried out. Interferences from several ionic species were examined for the determination of copper: the interference effect by Fe(III) and Fe(II) up to 1.5 mg L⁻¹ was successfully suppressed by pretreating sample with ammonium acetate buffer solution (pH 8.4). Good linearity of a standard calibration graph was obtained over the ranges of 0-8 and 0-2 μg L⁻¹ of copper and iron, respectively, and the detection limits were 0.05 and 0.02 μg L⁻¹ for copper and iron, respectively. The precision of the methods in terms of relative standard deviation were 1.4 and 1.5% of R.S.D. which were obtained from 10 injections of 2.0 and 1.0 μg L⁻¹ of standard copper and iron, respectively. The proposed methods were successfully applied to the determination of copper and iron in tap and river water samples. The accuracy of the proposed methods was assessed by the analysis of certified reference material of river water.     

Transition-metal-catalyzed sequential cross-coupling of bis(iodozincio)methane and -ethane with two different organic halides

Bis(iodozincio)methane, prepared from diiodomethane and zinc, reacts with an organic halide in the presence of a transition-metal catalyst to give an iodozinciomethylenated compound; this then reacts with another organic halide to form a C--C bond. The overall process connects two electrophiles with one carbon atom. Bis(iodozincio)ethane can also undergo this transformation, yielding a new stereogenic center. The asymmetric induction of this stereogenic center was investigated by using a chiral palladium catalyst.     

Synthesis of Cp*CH2PPh2 and its use as a ligand for the nickel-catalysed cross-coupling reaction of alkyl halides with aryl Grignard reagents

A new ligand, Cp*CH2PPh2 (Cp* = 1,2,3,4,5-pentamethyl-2,4-cyclopentadienyl), was prepared, and was used as a ligand for nickel-catalysed cross-coupling reaction of alkyl halides with aryl Grignard reagents, which nickel-phosphine complexes had never made possible.     

Exciton recurrence motion in aggregate systems in the presence of quantized optical fields

The exciton dynamics of model aggregate systems, dimer, trimer, and pentamer, composed of two-state monomers is computationally investigated in the presence of three types of quantized optical fields, i.e., coherent, amplitude-squeezed, and phase-squeezed fields, in comparison with the case of classical laser fields. The constituent monomers are assumed to interact with each other by the dipole-dipole interaction, and the two-exciton model, which takes into account both the one- and two-exciton generations, is employed. As shown in previous studies, near-degenerate exciton states in the presence of a (near) resonant classical laser field create quantum superposition states and thus cause the spatial exciton recurrence motion after cutting the applied field. In contrast, continuously applied quantized optical fields turn out to induce similar exciton recurrence motions in the quiescent region between the collapse and revival behaviors of Rabi oscillation. The spatial features of exciton recurrence motions are shown to depend on the architecture of aggregates. It is also found that the coherent and amplitude-squeezed fields tend to induce longer-term exciton recurrence behavior than the phase-squeezed field. These features have a possibility for opening up a novel creation and control scheme of exciton recurrence motions in aggregate systems under the quantized optical fields.     

Cobalt‐Catalyzed Isomerization of 1‐Alkenes to (E)‐2‐Alkenes with Dimethylphenylsilylmethylmagnesium Chloride and Its Application to the Stereoselective Synthesis of (E)‐Alkenylsilanes

“Co”axing selectivity into isomerization : Treatment of 1‐alkenes with dimethylphenylsilylmethylmagnesium chloride in the presence of a cobalt‐NHC complex in dioxane at 50 °C or higher provides the corresponding (E)‐2‐alkenes selectively. The isomerization is applicable to the stereoselective synthesis of (E)‐crotylsilanes and (E)‐1‐propenylsilanes from the corresponding homoallylsilanes and allylsilanes, respectively.

     

Investigation of electronic states of infinite-layer SrFeO2 epitaxial thin films by X-ray photoemission and absorption spectroscopies

We investigated the electronic states of a single-crystal SrFeO₂ epitaxial thin film in the valence-band and conduction-band regions using synchrotron-radiation X-ray photoemission and absorption spectroscopies. Fe 2p–3d resonant photoemission measurements revealed that the Fe 3d states have higher densities of states at binding energies of 3–5 eV and 5–8.5 eV in the valence-band region. The O K-edge X-ray absorption spectrum exhibited three peaks in the Fe 3d-derived conduction band hybridized with O 2p states; these can be assigned to Fe 3d_xy, 3d_xz + 3d_yz, and 3d_x²_–y². In addition, the indirect bandgap value of the SrFeO₂ film was determined to be 1.3 eV by transmission and absorption spectroscopies.     

Targeted sonodynamic therapy using protein-modified TiO2 nanoparticles

Our previous study suggested new sonodynamic therapy for cancer cells based on the delivery of titanium dioxide (TiO₂) nanoparticles (NPs) modified with a protein specifically recognizing target cells and subsequent generation of hydroxyl radicals from TiO₂ NPs activated by external ultrasound irradiation (called TiO₂/US treatment). The present study first examined the uptake behavior of TiO₂ NPs modified with pre-S1/S2 (model protein-recognizing hepatocytes) by HepG2 cells for 24 h. It took 6 h for sufficient uptake of the TiO₂ NPs by the cells. Next, the effect of the TiO₂/US treatment on HepG2 cell growth was examined for 96 h after the 1 MHz ultrasound was irradiated (0.1 W/cm², 30 s) to the cells which incorporated the TiO₂ NPs. Apoptosis was observed at 6 h after the TiO₂/US treatment. Although no apparent cell-injury was observed until 24 h after the treatment, the viable cell concentration had deteriorated to 46% of the control at 96 h. Finally, the TiO₂/US treatment was applied to a mouse xenograft model. The pre-S1/S2-immobilized TiO₂ (0.1 mg) was directly injected into tumors, followed by 1 MHz ultrasound irradiation at 1.0 W/cm² for 60 s. As a result of the treatment repeated five times within 13 days, tumor growth could be hampered up to 28 days compared with the control conditions.     

Modified Protein-Water Interactions in CHARMM36m for Thermodynamics and Kinetics of Proteins in Dilute and Crowded Solutions

Proper balance between protein-protein and protein-water interactions is vital for atomistic molecular dynamics (MD) simulations of globular proteins as well as intrinsically disordered proteins (IDPs). The overestimation of protein-protein interactions tends to make IDPs more compact than those in experiments. Likewise, multiple proteins in crowded solutions are aggregated with each other too strongly. To optimize the balance, Lennard-Jones (LJ) interactions between protein and water are often increased about 10% (with a scaling parameter, λ = 1.1) from the existing force fields. Here, we explore the optimal scaling parameter of protein-water LJ interactions for CHARMM36m in conjunction with the modified TIP3P water model, by performing enhanced sampling MD simulations of several peptides in dilute solutions and conventional MD simulations of globular proteins in dilute and crowded solutions. In our simulations, 10% increase of protein-water LJ interaction for the CHARMM36m cannot maintain stability of a small helical peptide, (AAQAA)₃ in a dilute solution and only a small modification of protein-water LJ interaction up to the 3% increase (λ = 1.03) is allowed. The modified protein-water interactions are applicable to other peptides and globular proteins in dilute solutions without changing thermodynamic properties from the original CHARMM36m. However, it has a great impact on the diffusive properties of proteins in crowded solutions, avoiding the formation of too sticky protein-protein interactions.     

BRDF color mapping using line scan camera

Optical Review - An optical imaging system for color mapping of the bidirectional reflectance distribution function (BRDF) using a line scan camera is proposed here that can detect slight BRDF...