Analysis of dynamic behavior of human middle ear using a finite-element method.

Applying the general-purpose finite-element package program (ISAP), a three-dimensional finite-element method (FEM) model of a human right middle ear, which included ossicles, was made and the mechanical properties and boundary conditions of the middle ear were determined by a comparison between the numerical results obtained from the FEM analysis and the measurement results of the fresh cadavers, normal subjects and patients, which were obtained by our developed sweep frequency middle ear analyzer (MEA). The "Elastic" boundary condition consisting of linear and torsional springs at the eardrum attachments to the annular ligament was more appropriate for the actual condition than "fully clamped" one. Rotational axis of the ossicular chain was assumed to be a fixed straight line from the anterior process of the malleus to the short process of the incus, and a load of the ossicular chain and cochlea was simplified to be expressed by the stiffness of the cochlea. Vibration patterns of the eardrum and ossicles at the first resonance frequency, obtained under these assumptions, were in agreement with the experimental results obtained by means of time-averaged holography and by using a video measuring system, except for the relatively large displacements at the tympanic ring.     

自然循环回路内芯片的强化沸腾换热研究

针对电子器件的高效冷却问题,对自然循环回路系统内表面加工有方柱形微结构的硅片上FC-72的强化沸腾换热性能进行了实验研究.测试了两个芯片,其表面上的方柱形微结构的边长均为30μm,但高度分别为60 μm和200 μm.沸腾介质的过冷度设为10 K、25 K和35 K.随着壁面过热度的增加,微结构表面芯片上的热流密度急剧增加且临界热流密度时芯片的表面温度低于芯片回路正常工作的临界上限温度85℃,这与其在池沸腾换热中的特点一样.但临界热流密度值与池沸腾情况相比有所降低.     

Enhancement of the Kerr effect for a quantum dot in a cavity

Nonlinear susceptibility of a quantum dot (QD) embedded in a two-sided cavity, is studied theoretically from a weak-coupling to a strong-coupling regime. In the relevance of a quantum logic gate, the corresponding nonlinear phase shifts (Kerr effect) are estimated for coherent wavepackets including one photon on average. In the weak-coupling regime, the phase shift enhances strongly as a function of a coupling constant between the cavity photon and QD, and eventually saturates in the strong-coupling regime. We also show transmission spectra to evaluate the efficiency of the phase shift. Although the efficiency decreases monotonically in the weak-coupling regime, it rises in the strong-coupling regime.     

Controlling the orientation of polar molecules with combined electrostatic and pulsed,nonresonant laser fields

We demonstrate that molecules with a moderate permanent dipole moment can be oriented with combined electrostatic and pulsed, nonresonant laser fields. We use OCS molecules as a sample. The degree of orientation can be increased by increasing the magnitude of electrostatic field and the peak intensity of the laser field or by decreasing the rotational temperature of the molecules.     

A structural study of CN treated amorphous silicon

Recently, a remarkable technique to overcome the problem of light-induced degradation in amorphous silicon (a-Si) solar cells using a cyanide (CN) treatment has been developed. Structural and bonding characteristics of CN in a-Si has been studied using ab initio molecular dynamics simulations. It was found that CN incorporation results in more than just the termination of dangling bonds. The connectivity of the covalent random network increases because the CN changes from triply bonded, which is a common form in molecular CN, to the singly bonded form. This may be the mechanism by which CN incorporation produces significant reductions in light-induced degradation.     

Structural analysis of the c(4 × 2) reconstruction in Si(0 0 1) and Ge(0 0 1) surfaces by low-energy electron diffraction

The c(4 × 2) structures in (0 0 1) surfaces of Si and Ge have been studied by low-energy electron diffraction (LEED). Using a proper cleaning method for the Si surface, we were able to observe clear c(4 × 2) LEED patterns up to incident energy of ∼400 eV as well as the Ge surface. Extensive experimental intensity-voltage curves allowed us to optimize the asymmetric dimer model up to the eighth layer (including the dimer layer) in depth in the dynamical LEED calculation. Optimized structural parameters are almost the same for the Si and Ge except for the height of the buckled-up atom of the asymmetric dimer. For the Ge surface, the structural parameters are in excellent agreement with those obtained by a previous theoretical calculation. The tilt angle and bond length of the dimer are 18 ± 1 (19 ± 1)° and 2.4 ± 0.1 (2.5 ± 0.1) Å for the Si(0 0 1) (Ge(0 0 1)), respectively.     

Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.     

Effect of Ru crystal orientation on the adhesion characteristics of Cu for ultra-large scale integration interconnects

The adhesion of Cu on Ru substrates with different crystal orientations was evaluated. The crystal orientation of sputter deposited Ru could be changed from (1 0 0) to (0 0 1) by annealing at 650 °C for 20 min. The adhesion of Cu was evaluated by the degree of Cu agglomeration on Ru. Cu films on annealed Ru films with the (0 0 1) crystal orientation showed 28% lower RMS values and 50% lower Ru surface coverage than Cu as-deposited on Ru having the (1 0 0) crystal orientation after annealing at 550 °C for 30 min, which suggest that Cu wettability on the Ru(0 0 1) was better than that on the Ru(1 0 0) plane. The low lattice misfit of 4% between Cu(1 1 1) and Ru(0 0 1) may be the reason for this good adhesion property.     

Current-driven resonant excitation of magnetic vortices

A magnetic vortex core in a ferromagnetic circular nanodot has a resonance frequency originating from the confinement of the vortex core. By the micromagnetic simulation including the spin-transfer torque, we show that the vortex core can be resonantly excited by an ac (spin-polarized) current through the dot and that the resonance frequency can be tuned by the dot shape. The resistance measurement under the ac current successfully detects the resonance at the frequency consistent with the simulation.