Cytotoxic activity of marine algae and a cytotoxic principle of the brown alga Sargassum tortile.

Partition fractions of hexane, CCl4 and CHCl3 from methanolic extracts of marine algae were each examined for cytotoxic activities against cultured P-388 lymphocytic leukemia cells. Cytotoxic activities were found for partition fractions of 21 species of seaweed. Bioactivity-guided fractionation of the CCl4 partition fraction from Sargassum tortile, exhibiting the most prominent activity, afforded dihydroxysargaquinone (1) and sargatriol (2) previously isolated from this alga. The former was evaluated as a cytotoxic principle, and the latter, showing moderate activity, was suggested to be an artifact derived from 1 during the isolation procedure.     

Effect of Ru crystal orientation on the adhesion characteristics of Cu for ultra-large scale integration interconnects

The adhesion of Cu on Ru substrates with different crystal orientations was evaluated. The crystal orientation of sputter deposited Ru could be changed from (1 0 0) to (0 0 1) by annealing at 650 °C for 20 min. The adhesion of Cu was evaluated by the degree of Cu agglomeration on Ru. Cu films on annealed Ru films with the (0 0 1) crystal orientation showed 28% lower RMS values and 50% lower Ru surface coverage than Cu as-deposited on Ru having the (1 0 0) crystal orientation after annealing at 550 °C for 30 min, which suggest that Cu wettability on the Ru(0 0 1) was better than that on the Ru(1 0 0) plane. The low lattice misfit of 4% between Cu(1 1 1) and Ru(0 0 1) may be the reason for this good adhesion property.     

Peroxyoxalate chemiluminescence detection of condensates of malondialdehyde with thiobarbituric acids using a flow system.

The peroxyoxalate chemiluminescence(CL) detection method for the evaluation of the CL intensity of malondialdehyde(MDA) condensates with seven 2-thiobarbituric acid derivatives is described. The method consists of a flow injection technique together with a CL detection system using bis(2,4,6-trichlorophenyl) oxalate(TCPO) and hydrogen peroxide as chemiluminogenic reagents. Linear correlations between CL intensity and concentration are obtained for pmol levels of condensates. Among the condensates, 1,3-diethyl-2-thiobarbituric acid(DETBA)-MDA shows the largest CL intensity. High performance liquid chromatography (HPLC)/CL detection of DETBA-MDA and 1,3-diphenyl-2-thiobarbituric acid(DPTBA)-MDA using a mixture of TCPO and hydrogen peroxide in acetonitrile as a postcolumn reagent solution is also described. The detection limits for DETBA-MDA and DPTBA-MDA are 20 and 200 fmol, respectively, per 20 microL injection at a signal-to-noise ratio of 2. This HPLC/CL detection system was applied to the determination of MDA in rat brains by using DETBA as a fluorescent derivatizing reagent.     

Properties of holomorphic Wiener functions —skeleton,contraction, and local Taylor expansion

Summary We show that each holomorphic Wiener function has a skeleton which is intrinsic from several viewpoints. In particular, we study the topological aspects of the skeletons by using the local Taylor expansion for holomorphic Wiener functions.Supported in part by the Grant-in-Aid for Science Research 03740120 Min. Education     

A fast atom bombardment mass spectrometric analysis of crown ether complexes [1]

Analyses of crown ether complexes of alkali metal ions and characterization of the complexes formed inm-nitrobenzyl alcohol have been carried out by fast atom bombardment (FAB) mass spectrometry. By using m-nitrobenzyl alcohol as a matrix for measurements, the stoichiometry of the complexes was assessed on the basis of the observed FAB peaks. In addition, the formation of crown ether-alkali metal complexes at a 2 : 1 molar ratio was enhanced by increasing the ionic radius of the metal ion in agreement with previous observations. On these grounds, FAB mass spectrometry may provide a rapid means for investigation of the complexation behavior of crown ethers and the stoichiometry of the complexes.     

10-Gbit/s optical receiver using ICs with low-capacitance HBT technology

A 10-Gbit/s optical receiver is developed using low-capacitance HBT IC technology. The HBT allows a cutoff frequency of 45 GHz and a maximum oscillation frequency of 70 GHz. The receiver contains an automatic gain-control amplifier IC with a gain of 16 dB, a bandwidth of 10.7 GHz, and a decision-circuit IC with an ambiguity of 66 mVp-p at a data rate of 10 Gbit/s. The sensitivity of this receiver is -26.5 dBm at a bit error rate of 10^-9. Transmission over a 140-km fiber was achieved successfully.     

Hetergeneous-nucleation synthesis of monodisperse ε-cobalt nanoparticles using palladium seeds

Monodisperse bimetallic Pd–Co nanoparticles were prepared via a thermal decomposition of cobalt carbonyl using palladium seeds at the Pd/Co molar ratios 0.5%, 1%, and 5%. The heterogeneously nucleated nanoparticles without any size-selective precipitation are sufficiently uniform to self-assemble into ordered arrays. The as-synthesized nanoparticles are each a single crystal with a complex cubic structure called ε-Co. The presence of Pd seeds seems to improve the stability of Co nanoparticles against oxidation based on the results from time-dependent magnetization measurement.     

Calculation of heat transfer and uniformity of chemical amplification during post-exposure bake

Heat transfer in a resist-coated silicon wafer using a bake process is theoretically evaluated by modeling the three-dimensional diffusion process, focusing on the controllability of the lithographic performance of chemically amplified resists. Six models of various ambient conditions are used. The proximity gap between the hotplate and the wafer is found to have a dominant influence on the heat transfer process for the whole system. Because the atmosphere near the wafer acts as a thermal diffusion buffer layer, no temperature gradient occurs in the resist, even when it is subjected to convective heat transfer from the resist surface. Experimental results obtained by X-ray lithography confirm the calculation results.     

Crosslinked poly(N-isopropylacrylamide) gel for electrophoretic separation and recovery of substances

Crosslinked poly(N-isopropylacrylamide) gel was tested on the feasibility for a preparative electrophoretic matrix. Horse heart myoglobin and bovine hemoglobin were well separated on the gel matrix electrophoretically by molecular sieving effect of the gel network. Relative mobilities of those proteins in the gel were larger than those in a crosslinked polyacrylamide gel of the same polymer concentration. After the separation, the protein-containing portion of the gel underwent swelling at 4°C and deswelling at 37°C, alternatively. As a result of the deswelling, each protein was recovered in a discharged solution out of the gel at almost 100% yield.     

Spin-relaxation and magnetoresistance in FM/SC/FM tunnel junctions

The effect of spin relaxation on tunnel magnetoresistance (TMR) in a ferromagnet/superconductor/ferromagnet (FM/SC/FM) double tunnel junction is theoretically studied. The spin accumulation in SC is determined by balancing of the spin-injection rate and the spin-relaxation rate. In the superconducting state, the spin-relaxation time τ_s becomes longer with decreasing temperature, resulting in a rapid increase of TMR. The TMR of FM/SC/FM junctions provides a useful probe to extract information about spin-relaxation in superconductors.