Determination of minor and trace elements in silicate rocks by inductively-coupled plasma emission spectrometry

Samples (0.5 g) are decomposed with mixed acids in a sealed teflon vessel. After suitable treatment, barium, cobalt, chromium, copper, lithium, nickel, scandium. strontium, vanadium and zirconium are determined sequentially. The method is satisfactory for a variety of standard silicate materials.     

Effects of electron beam preirradiation on the γ radiolysis of polyethylene

The γ radiolysis of polyethylene preirradiated with electron beams to 3 Mrad was carried out at 30–100°C in vacuo with a dose rate of 6.35 × 10⁵ rad/hr. The hydrogen formation in the γ radiolysis was little affected by the preirradiation of electron beams, whereas the formation of trans-vinylene unsaturation and gel was somewhat retarded. The rates of the formation of hydrogen and trans-vinylene unsaturation were described by the zero-order formation kinetics with respect to each concentration combined with the first-order disappearance. The apparent rate constants and activation energies for the formation and disappearance of hydrogen and trans-vinylene unsaturation were almost independent of the preirradiation. The gel fraction was analyzed by using the Charlesby–Pinner equation. The G values of crosslinking and main chain scission were increased by the preirradiation, whereas their activation energies remained unaltered. On the basis of these results the effects of preirradiation on the reactions induced by γ rays in polyethylene were discussed.     

Simultaneous sample preparation for high-performance liquid chromatographic determination of Vitamin A and β-carotene in emulsified nutritional supplements after solid-phase extraction

Determination of small amounts of the fat-soluble species Vitamin A (VA) (2.5 μg/g) and β-carotene (9 μg/g) from emulsified nutritional supplements containing 50 kinds of co-existing compounds and a fat content between 2000 and 8000 times higher was performed by solid-phase extraction (SPE) and high-performance liquid chromatography (HPLC) with fluorescence detection set at ex. 350 nm and em. 480 nm, and visible detection at 450 nm using an Inertsil ODS 80A (5 μm) analytical column. Mobile phases of methanol-ethanol (50:50) and acetonitrile-ethanol (70:30) were used for the both vitamins. A Bond Elut C₁₈ cartridge was chosen for SPE after comparison with eight other types of SPE cartridge. Retention time of VA and β-carotene was 7 and 8 min, respectively, giving a limit of detection of ca. 0.1 ng per injection at a signal-to-noise ratio 3:1. Recoveries of VA and β-carotene were over 90% by the standard addition method. Relative standard deviation of VA and β-carotene were ca. 2.9 (n=5) and 2.3% (n=5), respectively.     

Synthesis and properties of a poly(diphenylacetylene) containing carbazolyl groups

1-(p-N-Carbazolylphenyl)-2-phenylacetylene (p-CzDPA) was polymerized by TaCl₅–co-catalyst systems (cocatalysts: n-Bu₁Sn, Et₃SiH, and 9BBN) to produce acetone-insoluble polymers in about 60-70% yields. Poly(p-CzDPA) was a yellowish-orange solid, most part of which was soluble in toluene, chloroform, etc., and its weight-average molecular weights were around 4×10⁵. This polymer formed a tough film by solution casting, and was thermally very stable (the onset temperature of weight loss in TGA in air 470°C). The oxygen per-meability coefficient of the polymer at 25°C was lower than two barrers. The present polymer showed photoconductivity and redox activity. © 1995 John Wiley & Sons, Inc.     

Stimulatory effect of red light on starch accumulation in a marine green alga,chlamydomonas sp. strain MGA161

A marine green alga,Chlamydomonas sp. strain MGA161 was cultivated under illumination of red and white lights. The growth rate under red light illumination was almost the same as that in the basic conditions under white light illumination, but red light-grown cells accumulated almost twice as much starch as white light-grown cells. Although there was a slight decrease in carbonic anhydrase activity, red light-illuminated cells had almost 2.3 times the fructose-l,6-diphos-phatase activity of white light-illuminated cells. Red light might stimulate starch accumulation by increasing the amounts of enzymes related to carbon fixation through the phytochrome system. Cells grown under red light degraded 1.6 times as much starch and produced 1.7 times as much hydrogen and 1.6 times as much ethanol compared with cells grown under white light during 12 h of dark anaerobic fermentation.     

Thermodynamically stable vesicle formation from glycolipid biosurfactant sponge phase

Thermodynamically stable vesicle (L(alpha1)) formation from glycolipid biosurfactant sponge phase (L(3)) and its mechanism were investigated using a "natural" biocompatible mannosyl-erythritol lipid-A (MEL-A)/L-alpha-dilauroylphosphatidylcholine (DLPC) mixture by varying the composition. The trapping efficiency for calcein and turbidity measurements clearly indicated the existence of three regions: while the trapping efficiencies of the mixed MEL-A/DLPC assemblies at the compositions with X(DLPC)< or =0.1 or X(DLPC)> or =0.8 were almost zero, the mixed assemblies at the compositions with 0.1 or =0.8 were multilamellar vesicles (L(alpha)) with diameter from 2 to 10 microm. Meanwhile, dynamic light scattering (DLS) measurement revealed that the average size of the vesicles at the composition of X(DLPC)=0.3 was 633.2 nm, which is remarkably small compared to other compositions. Moreover, the mixed vesicle solution at the composition of X(DLPC)=0.3 was slightly bluish and turbid and kept its dispersion stability at 25 degrees C for more than 3 months, indicating the formation of a thermodynamically stable vesicle (L(alpha1)). These results exhibited the formation of a thermodynamically stable vesicle (L(alpha1)) with a high dispersibility from the MEL-A/DLPC mixture. The asymmetric distribution of MEL-A and DLPC in the two vesicle monolayers caused by the difference in geometrical structures is very likely to have changed their self-assembled structure from a sponge phase (L(3)) to a thermodynamically stable vesicle (L(alpha1)).     

Copolymerization of 1,6-anhydro-ß-D-galactopyranose and 1,6-anhydro-ß-D-mannopyranose derivatives

1,6-Anhydro-2,3,4-tri-O-(p-methylbenzyl)-ß-D -galactopyranose (TXGal,M₁) has been copolymerized with 1,6-anhydro-2,3,4-tri-O-benzyl-ß-D -mannopyranose (TBMan,M₂), the products characterized by NMR, specific rotation, and viscosity, and the reactivity ratios calculated. The reactivity ratios r₁ = 0.37 ± 0.15 and r₂ = 38 ± 4 indicate that the anhydromannose derivative is about 100 times as reactive as that of anhydrogalactose. A comparison of glucose, mannose, and galactose copolymerizations suggests that the reactivity differences of the three propagating cations are comparatively small and the reactivity differences of the monomers large. This result is consistent with a mechanism proposed earlier. Methyl substitution on the aromatic rings of the p-xylyl groups inhibits the initiation process significantly relative to benzyl, but propagation only slightly.     

A gravimetric method for the determination of oxygen in uranium oxides and ternary uranium oxides by addition of alkaline earth compounds

A simple gravimetric determination of oxygen in uranium oxides and ternary uranium oxides is described. In alkaline earth uranates which are formed by heating in air at 800–1100°C, uranium is in the hexavalent state over certain continuous ranges of alkaline earth-to-uranium ratios. Thus, if an alkaline earth uranate or a compound containing an alkaline earth element, e.g. MgO, is mixed with the oxide sample and heated in air under suitable conditions, oxygen can be determined from the weight change before and after the reaction. The standard deviation of the O:U ratio for a UO_2+x test sample is ±0.0008–0.001, if a correction is applied for atmospheric moisture absorbed during mixing.     

Electrophoretic mobility of the polymer-like micelles of tetradecyldimethylamine oxide hemihydrochloride

Effects of the surfactant concentration C_d and the NaCl concentration C_s on the electrophoretic mobilities U of the well-characterized polymer-like micelles have been investigated by the electrophoretic light scattering, using tetradecyldimethylamine oxide hemihydrochloride (C14DMAO·1/2HCl). At the high ionic strength of 0.1 mol kg⁻¹ NaCl, the electrophoretic mobilities were independent of C_d (5 mM < C_d < 100 mM), despite the concentration-dependent micelle growth of the polymer-like micelles. This suggests that the electrophoretic mobility of the polymer-like micelle at high ionic strengths is independent of the contour length (i.e., the molecular weight), as found on linear polyelectrolytes. Somewhat surprisingly, the entanglements of the polymer-like micelles gave small effect on the electrophoretic mobilities in the examined range of the surfactant concentration above an overlap concentration. The mobilities of the polymer-like micelle decreased with √C_s in a single exponential manner in the range of C_s from 0.02 to 0.3 mol kg⁻¹. It is suggested that the cylinder model can be applied to the electrophoretic mobilities of the polymer-like micelles at high ionic strengths (i.e. a free-draining behavior), since the persistence length of the polymer-like micelle (20 nm) is much larger than the Debye length at high ionic strength.     

Groove-spanning behavior of lipid membranes on microfabricated silicon substrates

We report on a spreading behavior of phospholipid membranes that arise from a lump of phospholipid (a lipid source) on topographically patterned substrates immersed in an aqueous solution. Microgrooves with well-defined shapes were prepared on Si111 surfaces by anisotropic etching in an alkaline solution. A spreading front that consists of membrane lobes and a single lipid bilayer was observed on the patterned silicon substrates by utilizing fluorescence interference contrast (FLIC) microscopy. FLIC images indicate that the membrane lobes span the microgrooves, while the underlying single lipid bilayer spread along the surface of the microgrooves. In fact, fluorescent polystyrene nanoparticles could be encapsulated in the microgrooves that were completely covered with the membrane lobes. The groove-spanning behavior of membrane lobes is discussed in terms of a balance between adhesion and bending energies of lipid bilayers.