A gravimetric method for the determination of oxygen in uranium oxides and ternary uranium oxides by addition of alkaline earth compounds

A simple gravimetric determination of oxygen in uranium oxides and ternary uranium oxides is described. In alkaline earth uranates which are formed by heating in air at 800–1100°C, uranium is in the hexavalent state over certain continuous ranges of alkaline earth-to-uranium ratios. Thus, if an alkaline earth uranate or a compound containing an alkaline earth element, e.g. MgO, is mixed with the oxide sample and heated in air under suitable conditions, oxygen can be determined from the weight change before and after the reaction. The standard deviation of the O:U ratio for a UO_2+x test sample is ±0.0008–0.001, if a correction is applied for atmospheric moisture absorbed during mixing.     

Electrophoretic mobility of the polymer-like micelles of tetradecyldimethylamine oxide hemihydrochloride

Effects of the surfactant concentration C_d and the NaCl concentration C_s on the electrophoretic mobilities U of the well-characterized polymer-like micelles have been investigated by the electrophoretic light scattering, using tetradecyldimethylamine oxide hemihydrochloride (C14DMAO·1/2HCl). At the high ionic strength of 0.1 mol kg⁻¹ NaCl, the electrophoretic mobilities were independent of C_d (5 mM < C_d < 100 mM), despite the concentration-dependent micelle growth of the polymer-like micelles. This suggests that the electrophoretic mobility of the polymer-like micelle at high ionic strengths is independent of the contour length (i.e., the molecular weight), as found on linear polyelectrolytes. Somewhat surprisingly, the entanglements of the polymer-like micelles gave small effect on the electrophoretic mobilities in the examined range of the surfactant concentration above an overlap concentration. The mobilities of the polymer-like micelle decreased with √C_s in a single exponential manner in the range of C_s from 0.02 to 0.3 mol kg⁻¹. It is suggested that the cylinder model can be applied to the electrophoretic mobilities of the polymer-like micelles at high ionic strengths (i.e. a free-draining behavior), since the persistence length of the polymer-like micelle (20 nm) is much larger than the Debye length at high ionic strength.     

Ion-exclusion chromatography with conductimetric detection of aliphatic carboxylic acids on a weakly acidic cation-exchange resin by elution with benzoic acid-beta-cyclodextrin

In this study, an aqueous solution consisting of benzoic acid with low background conductivity and beta-cyclodextrin (beta-CD) of hydrophilic nature and the inclusion effect to benzoic acid were used as eluent for the ion-exclusion chromatographic separation of aliphatic carboxylic acids with different pKa values and hydrophobicity on a polymethacrylate-based weakly acidic cation-exchange resin in the H+ form. With increasing concentration of beta-cyclodextrin in the eluent, the retention times of the carboxylic acids decreased due to the increased hydrophilicity of the polymethacrylate-based cation-exchange resin surface from the adsorption of OH groups of beta-cyclodextrin. Moreover, the eluent background conductivity decreased with increasing concentration of beta-cyclodextrin in 1 mM benzoic acid, which could result in higher sensitivity for conductimetric detection. The ion-exclusion chromatographic separation of carboxylic acids with high resolution and sensitivity was accomplished successfully by elution with a 1 mM benzoic acid-10 mM cyclodextrin solution without chemical suppression.     

Enantioselective reduction of ketones with optically active 2,2′-diamino-6,6′-dimethylbiphenyl-lithium aluminum hydride complex

Enantioselective reductions of prociral ketones with chiral hydride reagent prepared from optically active 2,2′-diamino-6,6′-dimethylbiphenyl and lithium aluminum hydride were accomplished in O.Y. more than 50%.     

The practical synthesis of a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246)

The synthetic route for a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246), was established by the coupling of optically active components, the bromohydrin 14 and the amine 24. We now describe the practical synthesis of these two optically active components. Bromohydrin 14 was obtained by the asymmetric borane reduction of the prochiral phenacyl bromide 13 using a catalyst prepared from aluminum triethoxide and a chiral amino alcohol. The other optically active component 24 was prepared from (S)-AMT.     

Enzymatic sulfation of polyphenols related to tannins by arylsulfotransferase.

This report discusses a novel type of arylsulfotransferase (AST) which was derived from human intestinal bacterium sulfated polyphenolic compounds when p-nitrophenyl sulfate (PNS) was taken as a donor substrate. (+)-Catechin, (+/-)-catechin, (-)-epicatechin and (-)-epicatechin gallate were better substrates than tyramine. (-)-Epigallocatechin and (-)-epigallocatechin gallate were slightly worse substrates than tyramine. Although gallic acid was a bad substrate, alkyl gallate esters were better substrates than tyramine. The degree of acceptor specificity increased in proportion to the length of the alkyl group up to the carbon number of five. Pedunculagin, geraniin and corilagin were less effective than tyramine. Rosmarinic acid and penta-O-galloyl-beta-D-glucose were similarly well sulfated. Two products, 4'-monosulfate and 4',5-disulfate of (+)-catechin, were detected at a two-fold molar excess of PNS over (+)-catechin. When (+)-catechin-4'-monosulfate as an acceptor was enzymatically sulfated with PNS as a donor, only the 4',5-disulfate was produced. Thus, arylsulfotransferase was useful for the convenient preparation of sulfate esters of polyphenols at their specific hydroxyl groups.     

Numerical analysis of the behavior of hydrogen added into a free-burning arc

The objective of the present work is to investigate the behavior of hydrogen in an atmospheric-pressure free-burning argon are when a small amount of hydrogen is added into the arc. A two-dimensional model calculation is carried out under the assumption that the ionization reaction of argon is in equilibrium and the reactions among hydrogen molecules, atoms, ions, and electrons are not necessarily in equilibrium. This calculation gives the following conclusion. The hydrogen mass fraction of 0.001 is too small to affect the flow and temperature fields markedly, and the concentration ratios among the hydrogen species are in equilibrium in the greater part of the arc region except for same parts with a steep temperature gradient. The hydrogen mass Junction, however, is not uniform in the me and, especially in the high-temperature region near the cathodes, over three dynes mass fraction of the hydrogen accumulates and flows downstream to cause a high flux of hydrogen atom toward the anode. This phenomena can be explained by the large difference between the diffusivity of hydrogen atom and that of hydrogen ion in argon ion.     

Thermodynamic properties of the Cu-Au system using a face-centered-cubic lattice model with a renormalized potential

A Monte Carlo simulation is carried out to study thermodynamic properties of Cu-Au alloys using a face-centered-cubic (fcc) lattice-gas model. To obtain quantitatively accurate results, a Finnis-Sinclair-type potential, which has been widely used for molecular dynamics (MD) simulations, is employed. To overcome some shortcomings of lattice-gas models such as neglecting vibrational entropy, the potential is mapped onto the fcc lattice using the renormalization technique. The renormalized potential gives an improved Cu-Au phase diagram compared to the original MD potential applied directly on the lattice.     

Water enables direct use of allyl alcohol for Tsuji-Trost reaction without activators

[reaction: see text] An aqueous biphasic reaction system enables the direct use of allyl alcohol in the Tsuji-Trost reaction without the help of any activating reagents for allyl alcohol. The reaction conditions are neutral to basic, allowing the use of amines as the nucleophile. Theoretical calculations have elucidated the importance of hydration of the hydroxy group for the smooth generation of pi-allylpalladium species.