High pressure Raman study on the local structure of 1-ethyl-3-methylimidazolium tetrafluoroborate

We have investigated the pressure-induced Raman spectral changes of 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF₄]). We found that [emim][BF₄] did not crystallize up to 1.2 GPa. The Raman CH stretching spectra arising from the CH₃ groups of the ethyl-chain and the CH₃ group adjacent to the imidazolium-ring in [emim]⁺ cation largely changed against pressure. Moreover, the Raman intensity of the CH₂ (N) bending band arising from the alkyl-chain drastically changes with increasing pressure, but that of the imidazolium-ring in-plane bending band arising from the imidazolium-ring is independent of pressure. Our results show that the environment around the alkyl-chain of [emim][BF₄] is largely perturbed rather than that around the imidazolium-ring upon compression.     

Thermal stability of ZnO thin film prepared by RF-magnetron sputtering evaluated by thermal desorption spectroscopy

Thermal stability of sputter deposited ZnO thin films was evaluated by thermal desorption spectroscopy (TDS). Desorption of Zn was mainly observed from the films deposited at low O₂/Ar gas ratio and low RF power. In contrast, O₂ desorption was mainly observed from the films deposited at high O₂/Ar gas ratio and high RF power. The amount of desorbed O₂ from the film increased with increasing the O₂/Ar gas flow ratio and the RF power. Furthermore, the desorption temperature of O₂ increased with increasing the RF power during the deposition. Thermal stability of the ZnO films was controlled not only by the O₂/Ar gas flow ratio, but also applied RF power to the target.     

The boundary of higher rank numerical ranges

The rank-k-numerical range of an n×n matrix A is defined as

     

Orthogonal projections of cubes and regular simplices into a plane

We show that for every \({k\ge 2}\) and \({n\ge k}\), there is an \({n}\)-dimensional unit cube in \({\mathbb{R}^n}\) which is mapped to a regular \({2k}\)-gon by an orthogonal projection in \({\mathbb{R}^n}\) onto a \({2}\)-dimensional subspace. Moreover, by increasing dimension \({n}\), arbitrary large regular \({2k}\)-gon can be obtained in such a way. On the other hand, for every \({m\ge 3}\) and \({n\ge m-1}\), there is an \({n}\)-dimensional regular simplex of unit edge in \({\mathbb{R}^n}\) which is mapped to a regular \({m}\)-gon by an orthogonal projection onto a plane. Moreover, contrary to the cube case, arbitrary small regular \({m}\)-gon can be obtained in such a way, by increasing dimension \({n}\).     

Okamoto model for necrosis and its expansions,CD38-cyclic ADP-ribose signal system for intracellular Ca2+ mobilization and Reg (Regenerating gene protein)-Reg receptor system for cell regeneration

In pancreatic islet cell culture models and animal models, we studied the molecular mechanisms involved in the development of insulin-dependent diabetes. The diabetogenic agents, alloxan and streptozotocin, caused DNA strand breaks, which in turn activated poly(ADP-ribose) polymerase/synthetase (PARP) to deplete NAD⁺, thereby inhibiting islet β-cell functions such as proinsulin synthesis and ultimately leading to β-cell necrosis. Radical scavengers protected against the formation of DNA strand breaks and inhibition of proinsulin synthesis. Inhibitors of PARP prevented the NAD⁺ depletion, inhibition of proinsulin synthesis and β-cell death. These findings led to the proposed unifying concept for β-cell damage and its prevention (the Okamoto model). The model met one proof with PARP knockout animals and was further extended by the discovery of cyclic ADP-ribose as the second messenger for Ca²⁺ mobilization in glucose-induced insulin secretion and by the identification of Reg (Regenerating gene) for β-cell regeneration. Physiological and pathological events found in pancreatic β-cells have been observed in other cells and tissues.     

A parametric successive underestimation method for convex multiplicative programming problems

This paper addresses itself to the algorithm for minimizing the product of two nonnegative convex functions over a convex set. It is shown that the global minimum of this nonconvex problem can be obtained by solving a sequence of convex programming problems. The basic idea of this algorithm is to embed the original problem into a problem in a higher dimensional space and to apply a branch-and-bound algorithm using an underestimating function. Computational results indicate that our algorithm is efficient when the objective function is the product of a linear and a quadratic functions and the constraints are linear. An extension of our algorithm for minimizing the sum of a convex function and a product of two convex functions is also discussed.     

On distance-biregular graphs of girth divisible by four

We apply a circuit chasing technique to distance-biregular graphs of girth divisible by four to derive a parameter restriction. As an application, we give a classification of distance-biregular graphs of girth divisible by four with trivalent vertices.     

Detection of diminished response to cold pressor test in smokers: Assessment using phase-contrast cine magnetic resonance imaging of the coronary sinus

Purpose

The purposes of this study were to evaluate the reproducibility for measuring the cold pressor test (CPT)-induced myocardial blood flow (MBF) alteration using phase-contrast (PC) cine MRI, and to determine if this approach could detect altered MBF response to CPT in smokers.

Materials and methods

After obtaining informed consent, ten healthy male non-smokers (mean age: 28 ± 5 years) and ten age-matched male smokers (smoking duration ≥ 5 years, mean age: 28 ± 3 years) were examined in this institutional review board approved study. Breath-hold PC cine MR images of the coronary sinus were obtained with a 3 T MR imager with 32 channel coils at rest and during a CPT performed after immersing one foot in ice water. MBF was calculated as coronary sinus flow divided by the left ventricular (LV) mass which was given as a total LV myocardial volume measured on cine MRI multiplied by the specific gravity (1.05 g/mL).

Results

In non-smokers, MBF was 0.86 ± 0.25 mL/min/g at rest, with a significant increase to 1.20 ± 0.36 mL/min/g seen during CPT (percentage change of MBF (?MBF (%)); 39.2% ± 14.4%, p < 0.001). Inter-study reproducibility for ?MBF (%) measurements by different MR technologist was good, as indicated by the intraclass correlation coefficient of 0.93 and reproducibility coefficient of 10.5%. There was no significant difference between smokers and non-smokers for resting MBF (0.85 ± 0.32 mL/min/g, p = 0.91). However, ?MBF (%) in smokers was significantly reduced (-4.0 ± 32.2% vs. 39.2 ± 14.4%, p = 0.011).

Conclusion

PC cine MRI can be used to reproducibly quantify MBF response to CPT and to detect impaired flow response in smokers. This MR approach may be useful for monitoring the sequential change of coronary blood flow in various potentially pathologic conditions and for investigating its relationship with cardiovascular risk.     

Development of variable‐magnification X‐ray Bragg optics

A novel X‐ray Bragg optics is proposed for variable‐magnification of an X‐ray beam. This X‐ray Bragg optics is composed of two magnifiers in a crossed arrangement, and the magnification factor, M, is controlled through the azimuth angle of each magnifier. The basic properties of the X‐ray optics such as the magnification factor, image transformation matrix and intrinsic acceptance angle are described based on the dynamical theory of X‐ray diffraction. The feasibility of the variable‐magnification X‐ray Bragg optics was verified at the vertical‐wiggler beamline BL‐14B of the Photon Factory. For X‐ray Bragg magnifiers, Si(220) crystals with an asymmetric angle of 14° were used. The magnification factor was calculated to be tunable between 0.1 and 10.0 at a wavelength of 0.112 nm. At various magnification factors (M≥ 1.0), X‐ray images of a nylon mesh were observed with an air‐cooled X‐ray CCD camera. Image deformation caused by the optics could be corrected by using a 2 × 2 transformation matrix and bilinear interpolation method. Not only absorption‐contrast but also edge‐contrast due to Fresnel diffraction was observed in the magnified images.     

Recent developments of optical fiber sensors for automotive use

Optical fiber sensing technologies are expected to apply for many future electronic control systems in automobiles, because of their inherent outstanding features, such as high noise immunity, high heat resistance, and flexible light propagation paths which can be applied to measure the movements and directions of the mobiles. In this paper, two typical applications of fiber sensing technologies in automobiles are described in detail. The combustion flame detector is one of the typical applications of a fiber spectroscopic technology which utilizes the feature of high noise and heat resistibility and remote sensibility. Measurement of engine combustion conditions, such as the detonation, the combustion initiation, and the air-fuel ratio, have been demonstrated in an experimental fiber sensing method. Fiber interferometers, such as a fiber gyroscope, have great possibilities in future mobile applications because they are applicable to many kinds of measurements for movements and physical variables. An optical fiber gyroscope utilizing the single polarized optical fiber and other optical devices has been developed. Quite an accurate measurement of vehicle position was displayed on a prototype navigation system which installed the fiber gyroscope as a rotational speed sensor.