Hydrogen migrations in mass spectrometry. VI—the chemical ionization mass spectra of substituted benzoic acids and benzyl alcohols

The H₂ and CH₄ chemical ionization mass spectra of a series of series of substituted benzoic acids and substituted benzyl alcohols have been determined. For the benzoic acids the major fragmentation reactions of the protonated molecule involve elimination of H₂O or elimination of CO₂, the latter reaction involving migration of the carboxylic hydrogen to the aromatic ring. For the benzyl alcohols the major fragmentation reactions of [MH]⁺ involve loss of H₂O or CH₂O, analogous to the CO₂ elimination reaction for the benzoic acids. It is shown that the CO₂ and CH₂O elimination reactions occur only when a conjugated aromatic ring system is present, and that for the carboxylic acid systems, methyl groups and, to a lesser extent, phenyl groups are capable of migrating. The only discernible effect of substituents on the fragmentation of [MH]⁺ is an enhancement of the H₂O loss reaction in the benzoic acid system when an amino, hydroxyl, or halogen substituent is ortho to the carboxyl function. This ‘ortho’ effect, which differs in scope from that observed in electron impact mass spectra, is attributed to an intramolecular catalysis by the ortho substituent of the 1,3 hydrogen migration in the carbonyl protonated acid followed by H₂O elimination. Apparently, this route is favoured over the direct elimination of H₂O from the carbonyl protonated acid, since the latter has a high activation energy barrier because of unfavourable orbital symmetry restrictions.     

Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.     

Excited states of porphyrin isomers and porphycene derivatives: a SAC-CI study

Excited states of free-base porphyrin isomers, porphycene (Pc), corrphycene (Cor), and hemiporphycene (hPc), were studied by the Symmetry-Adapted Cluster (SAC)/SAC-Configuration Interaction (CI) method. The absorption peaks of the porphyrin isomers were assigned on the basis of the SAC-CI spectra. The X, Y, X', and Y' bands of the porphyrin isomers, which have weak intensities, are identified. The differences in the Q-band absorptions among the isomers were clearly explained by the four-orbital model. In Cor and hPc, the wave function of the B-band corresponds to the mixture of the four-orbital excitations and the optically forbidden excitation of free-base porphin (P), due to the molecular symmetry lowering in the isomers. The B-band character is described by the five-orbital model in Pc and the six-orbital model in Cor and hPc. Two tetrazaporphycenes and two ring-extended (dibenzo) porphycenes were designed, and the Q-band transition moment was successfully controlled. These examples show that the control of the four-orbital energy levels is the guiding principle for pigment design in porphyrin compounds.     

γ-Radiolysis of 5-fluorouracil and 5-fluorouridine derivatives having sulfur-containing substituents

γ-Radiolysis reactions of eight 5-fluorouracil (5-FU) derivatives having sulfonyl group-containing substituents at the 1-position and five 5-fluorouridine (5-FUR) derivatives having thioureido group-containing substituents were studied under the conditions where hydrated electron (e_aq^?) and hydroxyl radical (HO·) become the principal reactive species. The 5-FU and 5-FUR derivatives were radiolyzed to give 5-FU and 5-FUR, respectively. The efficiency of the reactions depended upon the nature of reactive species and also upon the nature of substituents. The reactivity features of the γ-radiolysis reactions are discussed.     

Cellulose Synthesized by Acetobacter Xylinum in the Presence of Acetyl Glucomannan

Acetobacter xylinum was cultured in Hestrin-Schramm medium (control medium) and Hestrin-Schramm medium containing acetyl glucomannan (mannan medium). Loose bundles of the cellulose microfibrils are formed in the mannan medium in contrast to the normal ribbons being produced in the control medium. Rapid-freeze and substitution method followed by metal-shadowing revealed the droplet-like structures around the microfibril synthesized in the mannan medium. The cellulose synthesized in the mannan medium was stained heavily by the periodic acid-thiocarbohydrazide-silver proteinate (PATAg) method, while the cellulose synthesized in the control medium was not stained. X-ray diffractometry and FT-IR spectroscopy indicated that the addition of mannan induced a change in the crystal structure from the algal-bacterial type to the cotton-ramie type. Thus the presence of acetyl glucomannan in the medium prevents the assembly of cellulose microfibrils and changes the crystal structure of cellulose.     

Syntheses of fluorine-containing fused polycyclic compounds: photo-cycloaddition of indene to cyclic fluoro-olefins and some reactions concerning the adducts

Acetophenone photo-sensitized addition of indene to cyclic fluoro-olefins (1,2-dichlorohexafluorocyclopentene-1, 1,2-dichlorotetrafluorocyclobutene-1 and hexafluorocyclobutene) gave the corresponding cycloadducts in satisfactory yields. The cycloadducts obtained predominantly had exo configuration.Some reactions such as reduction, oxidation, dechlorination and halogenation, of the cycloadducts were also studied.     

Polymer-supported bases. IX. Synthesis and catalytic activity of polymer-bound 4-(1-pyrrolidino)pyridine moieties

Polystyrene-bound 4-(1-pyrrolidino)pyridine moieties were prepared by the reaction of chloromethylated polystyrene resins with pyrrolidinopyridine derivatives containing hydroxyl groups. The supported amines were effective catalysts for acylations of tert-alcohols or enols, acylrearrangements, and diester synthesis from epoxides and anhydrides. Some of the low ring-substituted (8–15%) catalysts exhibited high activity comparable to that of 4-(N,N-dimethylamino)pyridine, though the activity was a little lower than that of 4-(1-pyrrolidino)pyridine. The recovered catalysts can be re-used, except for acyl rearrangements, without significant decrease in activity.     

Reactivity of cobaloxime bound to polystyrene chain by carbon–cobalt σ bond

The (alkyl)-bis(dimethylglyoximato)pyridinecobalt attached to polychloromethylstyrene by a cobalt–carbon bond was prepared by the reaction of Co(II)(DH)₂Py with polychloromethylstyrene in benzene. The fraction of p-vinylbenzyl·Co(DH)₂Py introduced to the polymer was 8.1 and 2.1 mole %. The photodecomposition of the polymer-bonded cobaloxime was investigated by following the change of the visible spectrum. The rate constant k_dec of the polymer-bonded cobaloxime was 1.1 × 10^?2 sec^?1 in benzene; it is one-fourth of that of its monomeric analog, benzyl·Co(DH)₂Py. The k_dec values of the cobaloximes were also measured in benzene–dimethyl sulfoxide mixed solvents, and the polymer effects were discussed. The dependence of the photodecomposition on energy of the irradiation light was investigated, and it was found that the absorption band near 470 nm is important for the photodecomposition of the cobalt–carbon bond. Spectroscopic measurements of the ligand exchange reaction of polymer-bonded cobaloxime with pyridine in dimethyl sulfoxide gave a larger equilibrium constant (1.2 × 10⁴ liter/mole) than that of benzyl·Co(DH)₂Py (9.4 × 10² liter/mole). The kinetic data of the ligand exchange reaction indicated that the larger equilibrium constant for the polymeric system is due to the smaller rate constant of the reverse reaction. The thermodynamic parameters were also obtained.     

A novel synthesis of 2,3‐dihydro‐1H‐thieno[3,4‐b]pyrroles via ring transformation of cyclic sulfonium ylides by titanium(IV) chloride‐triethylamine system

A series of cyclic sulfonium ylides 4a‐h reacted with titanium( IV ) chloride in the presence of triethyl‐amine to give the corresponding fused 2,3‐dihydro‐1H‐thieno[3,4‐b]pyrroles 5a‐h , via a ring opening and recyclization. In contrast, treatment of compounds 4a, 4b, 4e and 4f with titanium(IV) chloride, triethy‐lamine and dimethylamine hydrochloride gave the corresponding thiophenes 6a, 6b, 6e and 6f . Furthermore, compounds 6a and 6b easily underwent cyclization with sodium hydride to afford the corresponding 5a and 5b .     

Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).