Propylene carbonate as a solvent for salting-out extraction and subsequent differential pulse polarography

Summary Selective and sensitive procedures are described for the direct differential pulse polarographic determination of antimony(III), indium(III) and cadmium(II) in propylene carbonate. This method was based on the salting-out extraction of their halide complexes into the solvent from acidic aqueous media. The extracted Sb(III), In(III) and Cd(II) complexes exhibit sharp differential pulse polarographic peaks at –0.21 V, –0.63 V and –0.72 V vs. SCE in salted-out propylene carbonate phases respectively. The lower limits of determination are 5.0g for Sb(III), 0.6g for In(III), and 0.2g for Cd(II) in 10 ml of the organic phase. A number of foreign ions are eliminated through both processes of solvent extraction and polarography using propylene carbonate.

---

Propylencarbonat als Lösungsmittel für die Fällungs-Extraktion und die nachfolgende Differential-Puls-Polarographie

Zusammenfassung Selektive und empfindliche Verfahren für die direkte Bestimmung von Sb(III), In(III) und Cd(II) in Propylencarbonat mit Hilfe der Differential-Puls-Polarographie wurden beschrieben. Die vorliegende Methode beruht auf der Fällungs-Extraktion der Halogenid-Komplexe aus wäßrig-saurem Medium in das Lösungsmittel. Die extrahierten Komplexe des Sb(III), In(III) und Cd(II) ergeben scharfe Peaks bei –0,21 V, –0,63 V und –0,72 V gegen die Kalomelelektrode in den betreffenden Propylencarbonat-Phasen. Die unteren Grenzen der Bestimmungen liegen bei 5,0g Sb, 0,6g In bzw. 0,2g Cd in 10 ml organischer Phase. Eine Anzahl Fremdionen wird durch die beiden Prozesse der Extraktion und der Polarographie in Propylencarbonat ausgeschaltet.

     

Broad spectrum and mode of action of an antibiotic produced byScytonema sp. TISTR 8208 in a seaweed-type bioreactor

A photobioreactor was constructed using anchored polyurethane foam strips (1 x 1 x 40 cm) fixed onto a stainless-steel ring to prevent flotation, as a biomass support material (BSM). This type of reactor was named a seaweed-type bioreactor. A filamentous cyanobacterium, Scytonema sp. TISTR 8208, which produces a novel cyclic dodecapeptide antibiotic, was immobilized in seaweed-type photobioreactor and cultivated with air containing 5% CO₂ sparged at a gas flow rate of 250 mL/min under illumination at a light intensity of 200 μmol photon m^-2s^-1. The antibiotic produced in the seaweed-type photobioreactor was purified by HPLC and examined regarding its spectrum and mode of action. The antibiotic effectively inhibited the growth of Gram-positive bacteria, pathogenic yeasts, and filamentous fungi, but it had only a weak effect on Gram-negative bacteria. Scanning electron micrograph analysis showed that the most characteristic change was swelling of the cells after exposure to the antibiotic. The antibiotic seems to alter the conformation of the microbial cell membrane, thereby changing its permeability, leading to osmotic shock.     

(+)-Phorboxazole A synthetic studies. A highly convergent, second generation total synthesis of (+)-phorboxazole A

[structure: see text] A second generation total synthesis of the potent antitumor agent (+)-phorboxazole A (1) has been achieved. The cornerstone of this approach comprises a more convergent strategy, involving late-stage Stille union of a fully elaborated C(1-28) macrocycle with a C(29-46) side chain. The second generation synthesis entails the longest linear sequence of 24 steps, with an overall yield of 4.2%.     

Small angle X-ray scattering from lamellar phase for β-3,7-dimethyloctylglucoside/water system: comparison with β-n-alkylglucosides

Small angle X-ray scattering (SAXS) is measured for the lamellar phase in aqueous systems of 1-o-β-3,7-dimethyoctyl-D-glucopyranoside (β-Glc(Ger)), which has recently been prepared by us, 1-o-β-decyl-D-glucopyranoside (β-GlcC₁₀), and 1-o-β-octyl-D-glucopyranoside (β-GlcC₈). The repeat distance d obtained from the position of the diffraction peak does not follow the swelling law d = 2δ_hc/_hc, where δ_hc and _hc are the thickness and the volume fraction of the hydrophobic layer, respectively. This may result from the fact that δ_hc increases and, equivalently, the surface area per surfactant molecule (a_s) decreases with increasing concentration. So we calculate δ_hc and a_s from the observed d value at each concentration using the above swelling law. The half-thickness δ_hc increases in the order β-GlcC₈ < β-Glc(Ger) < β-GlcC₁₀ at a fixed concentration. On the other hand, the data on a_s for β-GlcC₁₀ and β-GlcC₈ lie on the same line and the data for β-Glc(Ger) lies above this line. These results suggest that the cross-sectional area of the geranyl chain is larger than that of the glucose headgroup. Existence of water filled defects in bilayer sheets is also discussed based on the SAXS pattern and the concentration dependence of d.     

Highly sensitive chiral shift reagent bearing two zinc porphyrins

A new type of chiral receptor (R,R)- or (S,S)-1b with C(2) symmetry was synthesized. An induced-fit type of binding behavior of 1b for diamines was revealed by CD spectroscopy. NMR studies demonstrated that 1b can function as a highly sensitive chiral shift reagent for the determination of the enantiomeric purity of chiral diamines, aziridine, and isoxazoline at the microgram level. [structure: see text]     

Preparation of dehydrated powder of hemoglobin vesicles

The carbonyl hemoglobin (CO-Hb), which was used to prevent denaturation (metHb) during the preparation of samples, was encapsulated into lipid vesicles constituted from unsaturated phospholipid, cholesterol and unsaturated fatty acid. Unsaturated components were polymerized by γ-irradiation to enhance the stability of bilayer membrane. An aqueous dispersion of resulting Hb vesicles was freeze-dried in the presence of saccharides (50–200 mM) to obtain a dehydrated powder of Hb vesicles. Change in the vesicle size, the leakage of encapsulated Hb and the oxidation of Hb to metHb were not observed. Therefore, the long-term storage of Hb vesicles can be realized as a dry powder.     

Aqueous phase behavior of a 1-O-phytanyl-beta-D-xyloside/water system. Glycolipid-based bicontinuous cubic phases of crystallographic space groups Pn3m and Ia3d

Temperature- and concentration-dependent aqueous phase diagram of a novel alkylglycoside, 1-O-phytanyl-beta-D-xyloside (beta-Xyl(Phyt)), was studied using small-angle X-ray scattering, polarizing optical microscopy, and differential scanning calorimetry. The phases found in this system include an Lc phase, an Lalpha phase, an HII phase, two inverted cubic phases of crystallographic space groups Pn3m and Ia3d, and a fluid isotropic phase, FI. The phase diagram of the beta-Xyl(Phyt)/water system is similar to that for the 1-monooleylglycerol (MO)/water system, suggesting that the phase behavior is largely determined by the overall molecular shape rather than the details of surfactant molecular structure. Moreover, the structural parameters of the beta-Xyl(Phyt) liquid crystals are also similar to those of the MO/water, due primarily to the similar molecular dimensions of two molecules. As compared to the MO/water system, however, the beta-Xyl(Phyt)/water system displays a lower value of TK ( approximately 8.(5) degrees C) and a wider temperature window for the mesophases (8.(5)-120 degrees C). Moreover, beta-Xyl(Phyt) is chemically more robust than MO, as the ether linkage is more stable against hydrolysis than the ester linkage and the phytanyl chain is fully saturated.     

Crystalline orientation of the InN films prepared by atmospheric pressure halide chemical vapor deposition

The structural analysis of the hexagonal InN film prepared on a Si(100) substrate by the AP-HCVD technique using InCl₃ and NH₃ as starting materials were carried out by the X-ray pole figure analysis. The deposited films consist of the hexagonal InN pillar crystals. It was found that the pillar crystals, which have random rotation around the 100 axis, were grown at an angle of 70–90° to the substrate.     

Biodegradable Phosphorylcholine Polymer Hydrogels Cross‐Linked with Vinyl‐Functionalized Polyphosphate

A vinyl‐functionalized polyphosphate (PIOP) was synthesized by ring‐opening polymerization of 2‐isopropyl‐2‐oxo‐1,3,2‐dioxaphospholane and 2‐(2‐oxo‐1,3,2‐dioxaphosphoroyloxyethyl methacrylate) with triisobutylaluminum as an initiator. The number‐averaged molecular weight of the PIOP was 1.2 × 10⁴. The average number of vinyl groups in the PIOP is 2.20. Transparent hydrogels were prepared by the radical polymerization of 2‐methacryroyloxyethyl phosphorylcholine with PIOP as a cross‐linking reagent. These hydrogels may have many applications in the biomedical field because of their biodegradability and biocompatibility.

Synthetic route of PIOP.     

Synthesis of α-(aminomethylene)-9H-purine-6-acetic acid derivatives

α-(Aminornethylene)-9H-purine-6-acetamide ( 3a ) and the corresponding ethyl acetate 9 have been synthesized by catalytic hydrogenation of 6-cyanomethylenepurine derivatives 2 and 7 which were obtained by the substitution of 6-chloropurine derivatives with α-cyanoacetamide and ethyl cyanoacetate, respectively. Substitution of α-(aminomethylene)-9-(tetrahydrofuran)-9H-purine-6-acetamide ( 3b ) with amines gave the corresponding N-alkyl- and N-arylamines 5 , which were treated with acid to give N-substituted α-(aminomethylene)-9H-purine-6-acetamides 6 . Substitution of 9 with amines gave the corresponding N-alkyl- and N-aryl substituted amines 10 .